On Tue, 2004-02-24 at 11:07, Alan Stern wrote: > On Mon, 23 Feb 2004, Bill Peck wrote: > > > I'm posting this here in case anyone can help. I can understand the usb > > drivers not working after a resume if I left them loaded (since I heard > > that ohci isn't acpi aware yet). But shouldn't it work if I unload > > first and reload after? > > It _should_ work. As an experiment, you could go so far as to also > unmount /proc/bus/usb and rmmod usbcore before suspending, then modprobe > and mount again after resume. > No difference. :-(
I tried your as203 patch and left the uhci_hcd driver loaded but that gives me the same results as before.. usb 2-1: control timeout on ep0out > Judging from your system log, even after the driver is unloaded and > reloaded, interrupt requests are not getting routed to it. That sounds > like a problem with the higher layers of Power Management (PCI maybe). > I posted a message on acpi-devel. > Alan Stern -- Bill Peck <[EMAIL PROTECTED]> ------------------------------------------------------- SF.Net is sponsored by: Speed Start Your Linux Apps Now. Build and deploy apps & Web services for Linux with a free DVD software kit from IBM. Click Now! http://ads.osdn.com/?ad_id=1356&alloc_id=3438&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
