Hi guys, Just following driver/kernel directions.
This happens when plugging in the camera listed in the output that follows the directions. Kernel is 2.6.4 with no other patches. Let me know if you need any other info/help. BTW even though it works, it runs REALLY slow, like takes it a couple of minutes to copy a 1mb picture off the device. It used to take a few seconds. Michael Mar 18 11:01:09 lostzed kernel: usb 3-2: new full speed USB device using address 4 Mar 18 11:01:09 lostzed kernel: usb-storage: This device (0686,400b,0001 S 06 P 50) has an unneeded SubClass entry in unusual_devs.h Mar 18 11:01:09 lostzed kernel: Please send a copy of this message to <[EMAIL PROTECTED]> Mar 18 11:01:09 lostzed kernel: drivers/usb/core/message.c: error getting string descriptor 0 (error=-110) Mar 18 11:01:09 lostzed kernel: scsi2 : SCSI emulation for USB Mass Storage devices Mar 18 11:01:09 lostzed kernel: Vendor: MINOLTA Model: DIMAGE CAMERA Rev: 1.00 Mar 18 11:01:09 lostzed kernel: Type: Direct-Access ANSI SCSI revision: 02 Mar 18 11:01:09 lostzed kernel: SCSI device sda: 501216 512-byte hdwr sectors (257 MB) Mar 18 11:01:09 lostzed kernel: sda: assuming Write Enabled Mar 18 11:01:09 lostzed kernel: sda: assuming drive cache: write through Mar 18 11:01:09 lostzed kernel: sda: sda1 Mar 18 11:01:09 lostzed kernel: Attached scsi removable disk sda at scsi2, channel 0, id 0, lun 0 ------------------------------------------------------- This SF.Net email is sponsored by: IBM Linux Tutorials Free Linux tutorial presented by Daniel Robbins, President and CEO of GenToo technologies. Learn everything from fundamentals to system administration.http://ads.osdn.com/?ad_id=1470&alloc_id=3638&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
