Alan Stern <[EMAIL PROTECTED]> replied: >On Mon, 3 May 2004, Fulko Hew wrote: > >> I managed to figure out how to fetch/configure and install 2.6.6-rc3... >> and re-ran the test, and got the same results... >> ie. no activity on hot-plug. :-( >> >> So whats the next thing to check? > >Do you have any other USB devices you could try plugging in to that port >after you unplug the SanDisk device?
Yes, they all behave the same way. I have also tried my Cannon S45 still camera and a no-name floppy disk drive. All work correctly under RH9, and all fail the same way under Fedora 2 and 2.6.6-rc3 >Also, could you post the contents of /proc/driver/uhci/0000:00:1d.1 >immediately after you unplug the device and then again after you replug >it? Here is my dump of /proc/driver/uhci/000:00:1d.1 after the various stages: == after cold-plug == HC status usbcmd = 00c1 Maxp64 CF RS usbstat = 0000 usbint = 000f usbfrnum = (0)30c flbaseadd = 2b99830c sof = 40 stat1 = 0095 Enabled Connected stat2 = 0080 Frame List Skeleton QH's == after hot-un-plug == HC status usbcmd = 0008 Maxp32 EGSM usbstat = 0020 HCHalted usbint = 000f usbfrnum = (0)264 flbaseadd = 2b998264 sof = 40 stat1 = 0080 stat2 = 0080 Frame List Skeleton QH's == after hot-plug == HC status usbcmd = 0008 Maxp32 EGSM usbstat = 0020 HCHalted usbint = 000f usbfrnum = (0)264 flbaseadd = 2b998264 sof = 40 stat1 = 0080 stat2 = 0080 Frame List Skeleton QH's ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
