On Tue, 4 May 2004, Alan Stern wrote: > On Sun, 2 May 2004, Gustaf Gunnarsson wrote: > > > Hi, I was a bit unsure what if you meant I should add patch 2 on patch 1 > > and patch 3 on patch 2 after each try. However after patch 1 alone worked > > I just tried them one by one and they all showed the same working result. > > > > I forgot to do the rmmod using patch 2 alone, however for both patch 1 and > > patch 3 this looked in dmesg like a normal unplug event. > > > > Doing rmmod with no patch installed does not work, when I do -f the same > > problem occurs which made me send the original fault report (all processes > > but init dies). > > All right, this means the problem is lower down somewhere. Here are some > more patches to try. The patches are separate, that is, you should remove > all of the previous patches before trying a new one. > > These patches allow successively more communication with the device. > Maybe somewhere in there the problem will turn up.
Ok, now I feel bad, the thing is that after I tried all these patches, which obviously worked splendid I recompiled to a "clean" kernel and tried it also just because I started to get a bad feeling of things working too good. Now that works also, I suppose I must have had an electrical failure of some kind in my computer because I had it turned off for 2 days this weekend when I was away (before that it probably hadnt been powercycled properly for a while). When I tried to do the rmmod operation this weekend on a clean kernel I just tried the rmmod, I never just tried to unplug the device again because I "knew" that didnt work, I guess that would have worked allready back then. Terribly sorry for wasting your time. //Gustaf ------------------------------------------------------- This SF.Net email is sponsored by: Oracle 10g Get certified on the hottest thing ever to hit the market... Oracle 10g. Take an Oracle 10g class now, and we'll give you the exam FREE. http://ads.osdn.com/?ad_id=3149&alloc_id=8166&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
