On Fri, 7 May 2004, Erik Meitner wrote:

> I have a Toshiba PDR M70 camera that does not work with the Linux 
> usb-storage driver. The breakage seems to occur when the driver tries to 
>   set up the scsi device. The module then goes into a state where it 
> cannot be unloaded. I have tried it with 2.6.4 and 2.6.5. Any 
> suggestions? I am not adverse to testing kernel patches.
> 
> These messages are logged after plugging in the camera:

> May  4 23:21:16 nx9 kernel: usb-storage: usb_stor_control_msg: rq=fe 
> rqtype=a1 value=0000 index=00 len=1
> May  4 23:21:16 nx9 kernel: usb-storage: GetMaxLUN command result is 
> -32, data is 0

That's suspicious.  There was a patch sent in recently to handle this sort 
of thing.  It might or might not make any difference with your camera, but 
it's worth a try:

http://marc.theaimsgroup.com/?l=linux-usb-devel&m=108295144732670&q=raw

Alan Stern



-------------------------------------------------------
This SF.Net email is sponsored by Sleepycat Software
Learn developer strategies Cisco, Motorola, Ericsson & Lucent use to 
deliver higher performing products faster, at low TCO.
http://www.sleepycat.com/telcomwpreg.php?From=osdnemail3
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to