On 5 Jun 2004, Stephen Evanchik wrote: > Hello, > > Since Linux 2.6.6 I've not been able to use any USB devices. I see this > error in the dmesg: > > usb 2-2: new full speed USB device using address 2 > usb 2-2: device descriptor read/all, error 0 > > When I disconnect the device, the kernel oopses (see below). I tried > 2.6.7-rc2 and had the same problem without the oops. > > Sorry if I am repeated / rehashing a known problem. I looked through the > sf.net lists and read through a number of posts but couldn't find > anything similar.
Could you please make sure that USB debugging is turned on in your kernel configuration, and then post a more complete dmesg output? From the one-line error message shown here it's hard to tell exactly what the problem is. Alan Stern ------------------------------------------------------- This SF.Net email is sponsored by the new InstallShield X. >From Windows to Linux, servers to mobile, InstallShield X is the one installation-authoring solution that does it all. Learn more and evaluate today! http://www.installshield.com/Dev2Dev/0504 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
