On Mon, 2004-06-07 at 17:28, Alan Stern wrote: > Dan: > > By the way, I just noticed that the Casio QV unusual_devs.h entry has > US_FL_FIX_INQUIRY. Do you know why it's there, or if it's really > needed? Can you post a usb-storage debugging log showing what happens > when you remove that flag? > > (I have a long-running background project to remove as many of those > FIX_INQUIRY flags as possible. A lot of them are unnecessary now that > other parts of usb-storage and the SCSI disk driver have been fixed up.) > > Alan Stern
I have no idea why it was there beyond the comment above the entry; don't confuse my ability to recognize when my camera stopped working and to use diff to track down the culprit with any actual knowledge about USB... :) Anyway, I replaced US_FL_FIX_INQUIRY with 0, and my camera still seems to work fine. I'm attaching the relevant output from /var/log/messages and dmesg; there are 3 dumps from dmesg taken (in sequence) after plugging the camera in, after mounting it, and then after unmounting it. Still, I think some log info was probably lost, there's a lot of it. Hope it helps. Dan Scholnik
Jun 8 00:22:47 localhost kernel: usb 1-1: new full speed USB device using address 3 Jun 8 00:22:48 localhost kernel: scsi1 : SCSI emulation for USB Mass Storage devices Jun 8 00:22:48 localhost kernel: Vendor: Model: Rev: Jun 8 00:22:48 localhost kernel: Type: Direct-Access ANSI SCSI revision: 02 Jun 8 00:22:48 localhost kernel: SCSI device sda: 256512 512-byte hdwr sectors (131 MB) Jun 8 00:22:48 localhost kernel: sda: assuming Write Enabled Jun 8 00:22:48 localhost kernel: sda: assuming drive cache: write through Jun 8 00:22:48 localhost kernel: sda:<7>usb-storage: queuecommand called Jun 8 00:22:48 localhost kernel: sda1 Jun 8 00:22:48 localhost kernel: Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Jun 8 00:22:48 localhost kernel: Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 Jun 8 00:22:49 localhost scsi.agent[15283]: disk at /devices/pci0000:00/0000:00:02.0/usb1/1-1/1-1:1.0/host1/1:0:0:0 Jun 8 00:29:31 localhost kernel: usb 1-1: USB disconnect, address 3
ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS hub 1-0:1.0: port 1, status 101, change 1, 12 Mb/s hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x101 ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS usb 1-1: new full speed USB device using address 3 usb 1-1: new device strings: Mfr=0, Product=0, SerialNumber=0 usb 1-1: hotplug usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: hotplug usb-storage 1-1:1.0: usb_probe_interface usb-storage 1-1:1.0: usb_probe_interface - got id usb-storage: USB Mass Storage device detected usb-storage: altsetting is 0, id_index is 80 usb-storage: -- associate_dev usb-storage: Vendor: Casio usb-storage: Product: QV DigitalCamera usb-storage: Transport: Control/Bulk usb-storage: Protocol: 8070i usb-storage: Endpoints: In: 0xc98f5ac4 Out: 0xc98f5ad8 Int: 0xc98f5aec (Period 1) usb-storage: *** thread sleeping. scsi1 : SCSI emulation for USB Mass Storage devices usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command INQUIRY (6 bytes) usb-storage: 12 00 00 00 24 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes usb-storage: Status code 0; transferred 36/36 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: Fixing INQUIRY data to show SCSI rev 2 - was 0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. Vendor: Model: Rev: Type: Direct-Access ANSI SCSI revision: 02 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code -32; transferred 12/12 usb-storage: -- stall on control pipe usb-storage: Call to usb_stor_ctrl_transfer() returned 2 usb-storage: -- CB transport device requiring auto-sense usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x29, ASCQ: 0x0 usb-storage: Unit Attention: Power on, reset, or bus device reset occurred usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code -32; transferred 12/12 usb-storage: -- stall on control pipe usb-storage: Call to usb_stor_ctrl_transfer() returned 2 usb-storage: -- CB transport device requiring auto-sense usb-storage: -- transport indicates command failure usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x6, ASC: 0x28, ASCQ: 0x0 usb-storage: Unit Attention: Not ready to ready change, medium may have changed usb-storage: scsi cmd done, result=0x2 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_CAPACITY (10 bytes) usb-storage: 25 00 00 00 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes usb-storage: Status code 0; transferred 8/8 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. SCSI device sda: 256512 512-byte hdwr sectors (131 MB) sda: assuming Write Enabled sda: assuming drive cache: write through usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda:<7>usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 00 00 00 00 08 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries usb-storage: Status code 0; transferred 4096/4096 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. sda1 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. Attached scsi removable disk sda at scsi1, channel 0, id 0, lun 0 Attached scsi generic sg0 at scsi1, channel 0, id 0, lun 0, type 0 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (1:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (2:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (3:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (4:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (5:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (6:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Bad target number (7:0) usb-storage: scsi cmd done, result=0x40000 usb-storage: *** thread sleeping. USB Mass Storage device found at 3 usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command TEST_UNIT_READY (6 bytes) usb-storage: 00 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping.
r complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 21 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 22 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 23 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 24 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 25 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 26 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 27 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 28 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 29 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2a 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2b 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2c 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2d 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2e 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2f 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 30 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 31 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 32 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 33 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 34 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 35 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 36 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping.
er_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 22 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 23 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 24 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 25 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 26 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 27 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 28 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 29 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2a 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2b 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2c 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2d 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2e 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 2f 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 30 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 31 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 32 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 33 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 34 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 35 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command READ_10 (10 bytes) usb-storage: 28 00 00 00 02 36 00 00 01 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_sglist: xfer 512 bytes, 1 entries usb-storage: Status code 0; transferred 512/512 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. usb-storage: queuecommand called usb-storage: *** thread awakened. usb-storage: Command ALLOW_MEDIUM_REMOVAL (6 bytes) usb-storage: 1e 00 00 00 00 00 usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: -- CB transport device requiring auto-sense usb-storage: Issuing auto-REQUEST_SENSE usb-storage: usb_stor_ctrl_transfer: rq=00 rqtype=21 value=0000 index=00 len=12 usb-storage: Status code 0; transferred 12/12 usb-storage: -- transfer complete usb-storage: Call to usb_stor_ctrl_transfer() returned 0 usb-storage: usb_stor_bulk_transfer_buf: xfer 18 bytes usb-storage: Status code 0; transferred 18/18 usb-storage: -- transfer complete usb-storage: CB data stage result is 0x0 usb-storage: -- Result from auto-sense is 0 usb-storage: -- code: 0x70, key: 0x0, ASC: 0x0, ASCQ: 0x0 usb-storage: No Sense: No additional sense information usb-storage: scsi cmd done, result=0x0 usb-storage: *** thread sleeping. ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00030100 PESC CSC PPS hub 1-0:1.0: port 1, status 100, change 3, 12 Mb/s usb 1-1: USB disconnect, address 3 usb 1-1: usb_disable_device nuking all URBs usb 1-1: unregistering interface 1-1:1.0 usb-storage: storage_disconnect() called usb-storage: usb_stor_stop_transport called usb-storage: -- dissociate_dev usb-storage: -- sending exit command to thread usb-storage: *** thread awakened. usb-storage: -- exit command received usb-storage: -- usb_stor_release_resources finished usb 1-1:1.0: hotplug usb 1-1: unregistering device usb 1-1: hotplug ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00020100 PESC PPS hub 1-0:1.0: port 1 enable change, status 100
