thinkliberty wrote:
Is there an option for legacy support for USB in the BIOS?
No the closest thing is usb keyboard support, I tried both options.
Are You using a hub to connect the device? or is it directly in to the USB port on the motherboard?
It's directly connected to the mainboard.
Regards,
Tommy
On Tue, 22 Jun 2004 21:58:49 +0200, Tommy Faasen <[EMAIL PROTECTED]> wrote:
Hi,
I have a sweex usb-wifi stick see also http://sourceforge.net/projects/linux-lc100020/ and it's forums. And I have 2 machines Machine 1: Via kt133a chipset -> uhci_hcd Machine 2: Sis 748 Chipset -> ohci_hcd
The device works without a problem on machine 2 with at least kernels 2.6.6 and 2.6.7. The usb wifi stick fails to accept an address on machine 1. There is a good faq about it with things you can try. (turn off acpi, irq for usb, no irq sharing, removing all pci cards,etc) I tried everything but with no luck. I tried kernels 2.4.26 till and including 2.6.7 without luck, however on the same machine is also connected an usb joystick that works without a problem, so my usb does work.
The usb wifi stick is known to need to get a descriptor before settings it's address but even with this patch I can't get it to work ( I didn't need the patch for machine 2).
I read some usb specs/docs kernel usb stuff, but since I'm no expert I cannot see where the problem is, therefore posted below is some information that hopefully is helpfull to you.
Please let me know what else I can do to help,
Tommy
Dmesg output: uhci_hcd 0000:00:07.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller uhci_hcd 0000:00:07.2: irq 10, io base 0000d400 uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 uhci_hcd 0000:00:07.2: detected 2 ports usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: default language 0x0409 usb usb1: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller usb usb1: Manufacturer: Linux 2.6.7 uhci_hcd usb usb1: SerialNumber: 0000:00:07.2 usb usb1: hotplug usb usb1: adding 1-0:1.0 (config #1, interface 0) usb 1-0:1.0: hotplug hub 1-0:1.0: usb_probe_interface hub 1-0:1.0: usb_probe_interface - got id hub 1-0:1.0: USB hub found hub 1-0:1.0: 2 ports detected hub 1-0:1.0: standalone hub hub 1-0:1.0: no power switching (usb 1.0) hub 1-0:1.0: individual port over-current protection hub 1-0:1.0: power on to power good time: 2ms hub 1-0:1.0: local power source is good PCI: Found IRQ 10 for device 0000:00:07.3 PCI: Sharing IRQ 10 with 0000:00:07.2 PCI: Sharing IRQ 10 with 0000:00:0d.0 PCI: Sharing IRQ 10 with 0000:00:0b.0 uhci_hcd 0000:00:07.3: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) uhci_hcd 0000:00:07.3: irq 10, io base 0000d800 uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 uhci_hcd 0000:00:07.3: detected 2 ports usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: default language 0x0409 usb usb2: Product: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) usb usb2: Manufacturer: Linux 2.6.7 uhci_hcd usb usb2: SerialNumber: 0000:00:07.3 usb usb2: hotplug usb usb2: adding 2-0:1.0 (cuhci_hcd 0000:00:07.2: port 1 portsc 01ab hub 1-0:1.0: port 1, status 0301, change 0003, 1.5 Mb/s uhci_hcd 0000:00:07.2: port 1 portsc 01a9 uhci_hcd 0000:00:07.2: port 1 portsc 01a9 uhci_hcd 0000:00:07.2: port 1 portsc 01a9 usb 2-0:1.0: hotplug hub 2-0:1.0: usb_probe_interface hub 2-0:1.0: usb_probe_interface - got id hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected hub 2-0:1.0: standalone hub hub 2-0:1.0: no power switching (usb 1.0) hub 2-0:1.0: individual port over-current protection hub 2-0:1.0: power on to power good time: 2ms hub 2-0:1.0: local power source is good uhci_hcd 0000:00:07.2: port 1 portsc 01a9 uhci_hcd 0000:00:07.2: port 1 portsc 01a9 hub 1-0:1.0: debounce: port 1: delay 100ms stable 4 status 0x301 usb 1-1: new low speed USB device using address 2 usb 1-1: skipped 1 descriptor after interface usb 1-1: new device strings: Mfr=4, Product=32, SerialNumber=0 usb 1-1: default language 0x0409 usb 1-1: Product: WingMan Gamepad usb 1-1: Manufacturer: Logitech Inc. usb 1-1: hotplug usb 1-1: adding 1-1:1.0 (config #1, interface 0) usb 1-1:1.0: hotplug uhci_hcd 0000:00:07.2: port 2 portsc 018a hub 1-0:1.0: port 2, status 0300, change 0003, 1.5 Mb/s uhci_hcd 0000:00:07.2: port 2 portsc 0188 hub 1-0:1.0: port 2 enable change, status 00000300 uhci_hcd 0000:00:07.3: port 1 portsc 018a hub 2-0:1.0: port 1, status 0300, change 0003, 1.5 Mb/s uhci_hcd 0000:00:07.3: port 2 portsc 008a hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s uhci_hcd 0000:00:07.3: port 1 portsc 0188 hub 2-0:1.0: port 1 enable change, status 00000300 uhci_hcd 0000:00:07.3: port 2 portsc 0088 hub 2-0:1.0: port 2 enable change, status 00000100 uhci_hcd 0000:00:07.3: suspend_hc uhci_hcd 0000:00:07.2: port 2 portsc 0093 hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s hub 1-0:1.0: debounce: port 2: delay 100ms stable 4 status 0x101 usb 1-2: new full speed USB device using address 3 uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 [e6fe4240] link (26fe41e2) element (26fe3040) 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) 1: [e6fe3080] link (26fe30c0) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=0, PID=69(IN) (buf=273ddf14) 2: [e6fe30c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 [e6fe4240] link (26fe41e2) element (26fe3040) 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) 1: [e6fe3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 [e6fe4240] link (26fe41e2) element (26fe3040) 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) 1: [e6fe3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)
usb 1-2: device not accepting address 3, error -71 usb 1-2: new full speed USB device using address 4 uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 [e6fe4240] link (26fe41e2) element (26fe3040) 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) 1: [e6fe3080] link (26fe30c0) e3 SPD Active Length=0 MaxLen=7 DT1 EndPt=0 Dev=0, PID=69(IN) (buf=273ddf14) 2: [e6fe30c0] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=e1(OUT) (buf=00000000)
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 [e6fe4240] link (26fe41e2) element (26fe3040) 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) 1: [e6fe3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)
uhci_hcd 0000:00:07.2: uhci_result_control: failed with status 440000 [e6fe4240] link (26fe41e2) element (26fe3040) 0: [e6fe3040] link (26fe3080) e0 Stalled CRC/Timeo Length=7 MaxLen=7 DT0 EndPt=0 Dev=0, PID=2d(SETUP) (buf=255aeec8) 1: [e6fe3080] link (00000001) e3 IOC Active Length=0 MaxLen=7ff DT1 EndPt=0 Dev=0, PID=69(IN) (buf=00000000)
usb 1-2: device not accepting address 4, error -71 uhci_hcd 0000:00:07.2: port 2 portsc 008a hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s uhci_hcd 0000:00:07.2: port 2 portsc 0088
lspci -v 00:00.0 Host bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133] (rev 03) Flags: bus master, medium devsel, latency 8 Memory at d0000000 (32-bit, prefetchable) [size=128M] Capabilities: [a0] AGP version 2.0 Capabilities: [c0] Power Management version 2
00:01.0 PCI bridge: VIA Technologies, Inc. VT8363/8365 [KT133/KM133 AGP] (prog-if 00 [Normal decode]) Flags: bus master, 66Mhz, medium devsel, latency 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 Memory behind bridge: da000000-dbffffff Prefetchable memory behind bridge: d8000000-d9ffffff Capabilities: [80] Power Management version 2
00:07.0 ISA bridge: VIA Technologies, Inc. VT82C686 [Apollo Super South] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686/A PCI to ISA Bridge Flags: bus master, stepping, medium devsel, latency 0 Capabilities: [c0] Power Management version 2
00:07.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP]) Subsystem: VIA Technologies, Inc. Bus Master IDE Flags: bus master, medium devsel, latency 32 I/O ports at d000 [size=16] Capabilities: [c0] Power Management version 2
00:07.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Flags: bus master, medium devsel, latency 32, IRQ 10 I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2
00:07.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 16) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Flags: bus master, medium devsel, latency 32, IRQ 10 I/O ports at d800 [size=32] Capabilities: [80] Power Management version 2
00:07.4 Bridge: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] (rev 40) Subsystem: VIA Technologies, Inc. VT82C686 [Apollo Super ACPI] Flags: medium devsel, IRQ 7 Capabilities: [68] Power Management version 2
00:09.0 SCSI storage controller: Adaptec AHA-2940U2/W Subsystem: Adaptec: Unknown device a180 Flags: bus master, medium devsel, latency 32, IRQ 11 BIST result: 00 I/O ports at dc00 [disabled] [size=256] Memory at dd200000 (64-bit, non-prefetchable) [size=4K] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 1
00:0d.0 Ethernet controller: Intel Corp. 82557 [Ethernet Pro 100] (rev 05) Subsystem: Compaq Computer Corporation NC3120 Flags: bus master, medium devsel, latency 32, IRQ 10 Memory at dd203000 (32-bit, prefetchable) [size=4K] I/O ports at ec00 [size=32] Memory at dd100000 (32-bit, non-prefetchable) [size=1M] Expansion ROM at <unassigned> [disabled] [size=1M] Capabilities: [dc] Power Management version 1
01:00.0 VGA compatible controller: nVidia Corporation Vanta [NV6] (rev 15) (prog-if 00 [VGA]) Subsystem: Unknown device 17f2:4010 Flags: bus master, 66Mhz, medium devsel, latency 32, IRQ 5 Memory at da000000 (32-bit, non-prefetchable) [size=16M] Memory at d8000000 (32-bit, prefetchable) [size=32M] Expansion ROM at <unassigned> [disabled] [size=64K] Capabilities: [60] Power Management version 1 Capabilities: [44] AGP version 2.0
cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.7 uhci_hcd S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2) S: SerialNumber=0000:00:07.3 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 2.06 S: Manufacturer=Linux 2.6.7 uhci_hcd S: Product=VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller S: SerialNumber=0000:00:07.2 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=046d ProdID=c209 Rev= 1.03 S: Manufacturer=Logitech Inc. S: Product=WingMan Gamepad C:* #Ifs= 1 Cfg#= 1 Atr=80 MxPwr= 40mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=(none) E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=10ms
cat /proc/interrupts CPU0 0: 2040665 XT-PIC timer 1: 8 XT-PIC i8042 2: 0 XT-PIC cascade 8: 1 XT-PIC rtc 10: 71185 XT-PIC EMU10K1, uhci_hcd, uhci_hcd, eth1 11: 19586 XT-PIC aic7xxx 12: 30728 XT-PIC Bt87x audio, bttv0, eth0 15: 18 XT-PIC ide1 NMI: 0 LOC: 2040654 ERR: 2234 MIS: 0
- To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to [EMAIL PROTECTED] More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
