On Tue, Jul 13, 2004 at 11:20:14AM -0400, Alan Stern wrote:
> I don't know the answer, but you might be able to do this by typing
>
> echo 'VVVVV:PPPPPPPPP:0x402' >/proc/scsi/device_info
>
> after scsi_mod is loaded and before you plug in your card reader. Here
> VVVVV and PPPPPPPP should be replaced with the Vendor and Product name of
> your device, as shown in /proc/scsi/scsi.
Well, that could be done, another good solution could be the one from
the FAQ (thank to the one who wrote it to me).
> Since this really is a SCSI-related matter, not USB-related, you should
> try posting your question on the SCSI mailing list:
> <[EMAIL PROTECTED]>
And I think this is the right thing to do :-)
Thank you very much,
--
Gr�goire Favre
________________________________________________________________________
http://magma.epfl.ch/greg ICQ:16624071 mailto:[EMAIL PROTECTED]
-------------------------------------------------------
This SF.Net email sponsored by Black Hat Briefings & Training.
Attend Black Hat Briefings & Training, Las Vegas July 24-29 -
digital self defense, top technical experts, no vendor pitches,
unmatched networking opportunities. Visit www.blackhat.com
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
