On Mon, 12 Jul 2004, Jesse Stockall wrote: > > Could you please try out the patch below in place of the controversial one > > I sent you back on July 7? You're the only person I know who has run up > > against the problem these two patches address. > > > > The system boots fine with the mouse on bus1. On shutdown the system > hangs trying to rmmod uhci_hcd.
Can you send the system log (with USB debugging turned on, of course) showing what was going on when the hang occurred? Or even better, could you try applying again the diagnostic patch from http://marc.theaimsgroup.com/?l=linux-usb-devel&m=108922505300476&w=2 and posting the system log? > The following is a sys-rq-T of the lsusb process after a successful > boot. Did lsusb hang immediately after booting? What drivers and USB devices had been loaded? What would happen if instead of running lsusb you tried to cat /proc/bus/usb/devices? Was some earlier process (like a modprobe) already hung when these other problems occurred? Alan Stern ------------------------------------------------------- This SF.Net email sponsored by Black Hat Briefings & Training. Attend Black Hat Briefings & Training, Las Vegas July 24-29 - digital self defense, top technical experts, no vendor pitches, unmatched networking opportunities. Visit www.blackhat.com _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
