On Tue, 2004-07-13 at 12:07, Alan Stern wrote: > > Can you send the system log (with USB debugging turned on, of course) > showing what was going on when the hang occurred? Or even better, could > you try applying again the diagnostic patch from > > http://marc.theaimsgroup.com/?l=linux-usb-devel&m=108922505300476&w=2 > > and posting the system log? >
Log is attached > Did lsusb hang immediately after booting? What drivers and USB > devices had been loaded? > System boots. X is started. Login on VT1. Run lsusb. See attachment for modules loaded. Mouse and on-board hub are only devices. > What would happen if instead of running lsusb you tried to cat > /proc/bus/usb/devices? > Hangs, same as lsusb. The following line appears in dmesg after I ran 'cat /proc/bus/usb/devices' usb_lock_device: udev=f7fd2800 count=fffefffe > Was some earlier process (like a modprobe) already hung when these other > problems occurred? > No, all modules are loaded, and hotplug / udev have finished. Mouse works fine in X Jesse -- Jesse Stockall <[EMAIL PROTECTED]>
usb-mm6.tgz
Description: application/compressed-tar
