1: Mobile hdd with usb2.0 interface hangs up after effort to write big file to it.
2:Description: I use 2.5 inch Fujitsu hdd with mobile USB2.0 box. For reading data from
it everything works great and speed is up to 10MB/sec. But when I try to write
something to it
for example a movie file it hangs up after severel megabytes are transfered. After
it I cannot anymore umount the device and after unplugging/plugging it again it is no
more
recognized.
Some symptoms: When the device is waiting the lamp on it is dark, when it transfers
data
the lamp blinks, when it hangs up the lamp lights up and doesn't switch off any more
untill
I plugg off the device from the USB port.
The same time if I unload the USB2.0 module from the kernel everything
works fine but slow as USB1.1 ofcoarse.
All other usb devices like FlashDisk, mouse, digial camera and so on seems to
work good. With USB2.0 also.
Computer: Fujitsu-Siemens Amilo A 7620 laptop
CPU: Athlon XP 2600+
Chipset: VIA KT400
RAM: 512 DDR
Video: ATI Radeon 9000
Internal HDD: 60GB Fujitsu
external HDD: 40GB Fujitsu with vfat fs.
USB controller: onboard
USB mobile box: Genesys USB to IDE
System: Gentoo Linux
kernel: Linux version 2.6.8-ck7 ([EMAIL PROTECTED]) (gcc version 3.3.2 20031218
(Gentoo Linux 3.3.2-r5, propolice-3.3-7)) #2 Tue Sep 21 22:21:55 CEST 2004
( Bug is also happens in gentoo-dev-source-2.6.8 and previous versions and with 2.6.x
kernel from kernel.org and with 2.4.18 kernel from Redhat.)
modules: usb_storage ehci_hcd sd_mod scsi_mod
uhci - compiled in kernel.
To reproduce the BUG just mount such device and copy something big to it. (cp
~/film.avi /mnt/usb/ )
:)
all listings from /proc/iomem /proc/ioports dmesg and so on are included in
attachments
dmesg:
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa440
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: DSDT (v001 UW F03_____ 0x00001000 INTL 0x02002024) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Built 1 zonelists
Kernel command line: root=/dev/hda2
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1994.343 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515068k/524224k available (2188k kernel code, 8392k reserved, 897k data, 160k
init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3964.92 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
CPU: AMD mobile AMD Athlon(tm) XP 2600+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1994.0081 MHz.
..... host bus clock speed is 265.0877 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [LPTP] (off)
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:11.6[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
udf: registering filesystem
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1 C2)
ACPI: Thermal Zone [THRM] (75 C)
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: Maximum main memory to use for agp memory: 439M
spurious 8259A interrupt: IRQ7.
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xdffff600, 00:03:0d:09:03:61, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHT2060AH, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]>
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[dffff800-dfffffff] Max
Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 11, io base 0000e000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 3, io base 0000e400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 5, io base 0000e800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
Firmware: 4.1
Sensor: 8
new absolute packet format
input: SynPS/2 Synaptics TouchPad on isa0060/serio2
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: FSB: 132.956 MHz
powernow: Found PSB header at c00fb040
powernow: Table version: 0x12
powernow: Flags: 0x0 (Mobile voltage regulator)
powernow: Settling Time: 100 microseconds.
powernow: Has 34 PST tables. (Only dumping ones relevant to this CPU).
powernow: PST:29 (@c00fb308)
powernow: cpuid: 0x7a0 fsb: 133 maxFID: 0x18 startvid: 0x7
powernow: FID: 0xf (10.5x [1396MHz]) VID: 0xe (1.300V)
powernow: FID: 0x0 (11.0x [1462MHz]) VID: 0xd (1.350V)
powernow: FID: 0x1 (11.5x [1528MHz]) VID: 0xc (1.400V)
powernow: FID: 0x2 (12.0x [1595MHz]) VID: 0xb (1.450V)
powernow: FID: 0x3 (12.5x [1661MHz]) VID: 0xa (1.500V)
powernow: FID: 0x14 (13.0x [1728MHz]) VID: 0x9 (1.550V)
powernow: FID: 0x15 (13.5x [1794MHz]) VID: 0x8 (1.600V)
powernow: FID: 0x18 (15.0x [1994MHz]) VID: 0x7 (1.650V)
powernow: SGTC: 13333
powernow: Minimum speed 1396 MHz. Maximum speed 1994 MHz.
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4975559cc4]
usb 3-1: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-1
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: replayed 25 transactions in 2 seconds
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 160k freed
Adding 506008k swap on /dev/hda1. Priority:-1 extents:1
SCSI subsystem initialized
NTFS driver 2.1.15 [Flags: R/W MODULE].
snd_via82xx: Unknown parameter `mmap_valid'
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 3 (level, low) -> IRQ 3
Yenta: CardBus bridge found at 0000:00:0b.0 [1734:1032]
Yenta: ISA IRQ mask 0x0090, PCI irq 3
Socket status: 30000006
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 10, pci mem e0a03700
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 3-1: USB disconnect, address 2
usb 3-1: new low speed USB device using address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-1
eth0: Setting full-duplex based on MII #1 link partner capability of 41e1.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY'
taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[fglrx] module loaded - fglrx 3.11.1 [Aug 4 2004] on minor 0
[fglrx] AGP detected, AgpState = 0x1f000a07 (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000304 (selected caps)
[fglrx] free AGP = 54800384
[fglrx] max AGP = 54800384
[fglrx] free LFB = 55574528
[fglrx] max LFB = 55574528
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 16384
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying
access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying
access hardware directly.
usb 4-4: new high speed USB device using address 3
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 < p5 >
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
SCSI error : <0 0 0 0> return code = 0x50000
end_request: I/O error, dev sda, sector 36202592
Buffer I/O error on device sda5, logical block 36186464
lost page write due to I/O error on sda5
scsi0 (0:0): rejecting I/O to offline device
Buffer I/O error on device sda5, logical block 36186465
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186466
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186467
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186468
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186469
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186470
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186471
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186472
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186473
lost page write due to I/O error on sda5
scsi0 (0:0): rejecting I/O to offline device
scsi0 (0:0): rejecting I/O to offline device
scsi0 (0:0): rejecting I/O to offline device
scsi0 (0:0): rejecting I/O to offline device
usb 4-4: USB disconnect, address 3
scsi0 (0:0): rejecting I/O to device being removed
hub 4-0:1.0: connect-debounce failed, port 4 disabled
scsi0 (0:0): rejecting I/O to dead device
FAT: unable to read inode block for updating (i_pos 305691)
scsi0 (0:0): rejecting I/O to dead device
FAT bread failed in fat_clusters_flush
slab error in kmem_cache_destroy(): cache `scsi_cmd_cache': Can't free all objects
[<c013bfd5>] kmem_cache_destroy+0x85/0x100
[<e09a1467>] scsi_destroy_command_freelist+0x57/0x90 [scsi_mod]
[<e09a2237>] scsi_host_dev_release+0x27/0x80 [scsi_mod]
[<c0241418>] device_release+0x58/0x60
[<c01f4168>] kobject_cleanup+0x98/0xa0
[<e0990140>] scsi_disk_put+0x30/0x60 [sd_mod]
[<e099051a>] sd_release+0x3a/0x70 [sd_mod]
[<c015982a>] blkdev_put+0x17a/0x1a0
[<c01597ee>] blkdev_put+0x13e/0x1a0
[<c0157392>] deactivate_super+0x62/0xa0
[<c016d79f>] sys_umount+0x3f/0x90
[<c0145648>] do_munmap+0x158/0x1b0
[<c016d807>] sys_oldumount+0x17/0x20
[<c010419b>] syscall_call+0x7/0xb
Thats it:)
I hope it will help.
WIth best regards
Petr Shatunov
P.s. It was my first bug report, so don't throw stones at me please!
If some fields are empty or look unusual you may have an old version.
Compare to the current minimal requirements in Documentation/Changes.
Linux grifosha 2.6.8-ck7 #2 Tue Sep 21 22:21:55 CEST 2004 i686 mobile AMD Athlon(tm)
XP 2600+ AuthenticAMD GNU/Linux
Gnu C 3.3.2
Gnu make 3.80
binutils 2.14.90.0.7
util-linux 2.12
mount 2.12
module-init-tools 0.9.15-pre4
e2fsprogs 1.34
Linux C Library 2.3.2
Dynamic linker (ldd) 2.3.2
Procps 3.1.15
Net-tools 1.60
Kbd 1.08
Sh-utils 5.0.91
Modules Loaded usb_storage fglrx ehci_hcd yenta_socket pcmcia_core snd_via82xx
snd_ac97_codec snd_mpu401_uart snd_rawmidi snd_seq_oss snd_seq_midi_event snd_seq
snd_seq_device snd_pcm_oss snd_pcm snd_timer snd_page_alloc snd_mixer_oss snd
soundcore ntfs sd_mod scsi_mod
usb_storage 64960 2 - Live 0xe0b20000
fglrx 213292 7 - Live 0xe0b3d000
ehci_hcd 26052 0 - Live 0xe0ae2000
yenta_socket 18560 0 - Live 0xe0a5a000
pcmcia_core 53324 1 yenta_socket, Live 0xe0aea000
snd_via82xx 25092 4 - Live 0xe09bc000
snd_ac97_codec 70672 1 snd_via82xx, Live 0xe0a60000
snd_mpu401_uart 7488 1 snd_via82xx, Live 0xe098d000
snd_rawmidi 22336 1 snd_mpu401_uart, Live 0xe09fc000
snd_seq_oss 35264 0 - Live 0xe0a08000
snd_seq_midi_event 6720 1 snd_seq_oss, Live 0xe09b9000
snd_seq 52496 4 snd_seq_oss,snd_seq_midi_event, Live 0xe0a3b000
snd_seq_device 7368 3 snd_rawmidi,snd_seq_oss,snd_seq, Live 0xe099c000
snd_pcm_oss 50152 0 - Live 0xe0a2d000
snd_pcm 87268 3 snd_via82xx,snd_pcm_oss, Live 0xe0a16000
snd_timer 23684 2 snd_seq,snd_pcm, Live 0xe09d2000
snd_page_alloc 9416 2 snd_via82xx,snd_pcm, Live 0xe0998000
snd_mixer_oss 18560 1 snd_pcm_oss, Live 0xe09b3000
snd 51940 19
snd_via82xx,snd_ac97_codec,snd_mpu401_uart,snd_rawmidi,snd_seq_oss,snd_seq_midi_event,snd_seq,snd_seq_device,snd_pcm_oss,snd_pcm,snd_timer,snd_mixer_oss,
Live 0xe09c4000
soundcore 7584 1 snd, Live 0xe0995000
ntfs 132020 0 - Live 0xe09da000
sd_mod 16320 4 - Live 0xe0990000
scsi_mod 65916 2 usb_storage,sd_mod, Live 0xe09a1000
00:00.0 Host bridge: VIA Technologies, Inc. VT8377 [KT400/KT600 AGP] Host Bridge (rev
80)
Subsystem: VIA Technologies, Inc.: Unknown device 0000
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 8
Region 0: Memory at e0000000 (32-bit, prefetchable) [size=64M]
Capabilities: [80] AGP version 3.5
Status: RQ=32 Iso- ArqSz=0 Cal=2 SBA+ ITACoh- GART64- HTrans- 64bit-
FW- AGP3- Rate=x1,x2,x4
Command: RQ=1 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI Bridge (prog-if 00 [Normal
decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR+ FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort+ >SERR- <PERR-
Latency: 0
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0000c000-0000cfff
Memory behind bridge: dfe00000-dfefffff
Prefetchable memory behind bridge: cfd00000-dfcfffff
BridgeCtl: Parity- SERR- NoISA+ VGA+ MAbort- >Reset- FastB2B-
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:09.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev
80) (prog-if 10 [OHCI])
Subsystem: Unknown device 1734:1032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (8000ns max), cache line size 08
Interrupt: pin A routed to IRQ 10
Region 0: Memory at dffff800 (32-bit, non-prefetchable) [size=2K]
Region 1: I/O ports at ec00 [size=128]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2+ AuxCurrent=0mA
PME(D0-,D1-,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:0b.0 CardBus bridge: O2 Micro, Inc. OZ6912 Cardbus Controller (rev 20)
Subsystem: Unknown device 1734:1032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 168
Interrupt: pin A routed to IRQ 3
Region 0: Memory at 20000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20400000-207ff000 (prefetchable)
Memory window 1: 20800000-20bff000
I/O window 0: 00004000-000040ff
I/O window 1: 00004400-000044ff
BridgeCtl: Parity- SERR- ISA- VGA- MAbort- >Reset- 16bInt+ PostWrite+
16-bit legacy interface ports at 0001
00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev
80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin A routed to IRQ 11
Region 4: I/O ports at e000 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev
80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin B routed to IRQ 3
Region 4: I/O ports at e400 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev
80) (prog-if 00 [UHCI])
Subsystem: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 08
Interrupt: pin C routed to IRQ 5
Region 4: I/O ports at e800 [size=32]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:10.3 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 82) (prog-if 20 [EHCI])
Subsystem: Uniwill Computer Corp: Unknown device 1212
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32, cache line size 10
Interrupt: pin D routed to IRQ 10
Region 0: Memory at dffff700 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=375mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.0 ISA bridge: VIA Technologies, Inc. VT8235 ISA Bridge
Subsystem: Unknown device 1734:1032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 0
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC
Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
Subsystem: VIA Technologies, Inc. VT82C586/B/VT82C686/A/B/VT8233/A/C/VT8235
PIPC Bus Master IDE
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32
Interrupt: pin A routed to IRQ 255
Region 4: I/O ports at fc00 [size=16]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97
Audio Controller (rev 50)
Subsystem: Unknown device 1734:1032
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at d800 [size=256]
Capabilities: [c0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:11.6 Communication controller: VIA Technologies, Inc. Intel 537 [AC97 Modem] (rev
80)
Subsystem: Unknown device 1734:1032
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Interrupt: pin C routed to IRQ 5
Region 0: I/O ports at dc00 [size=256]
Capabilities: [d0] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
00:12.0 Ethernet controller: VIA Technologies, Inc. VT6102 [Rhine-II] (rev 74)
Subsystem: Unknown device 1734:1032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping-
SERR- FastB2B-
Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 32 (750ns min, 2000ns max), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: I/O ports at d400 [size=256]
Region 1: Memory at dffff600 (32-bit, non-prefetchable) [size=256]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R250 Lf [Radeon
Mobility 9000 M9] (rev 01) (prog-if 00 [VGA])
Subsystem: Unknown device 1734:1032
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+
SERR- FastB2B-
Status: Cap+ 66Mhz+ UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort-
<MAbort- >SERR- <PERR-
Latency: 255 (2000ns min), cache line size 08
Interrupt: pin A routed to IRQ 11
Region 0: Memory at d0000000 (32-bit, prefetchable) [size=128M]
Region 1: I/O ports at c800 [size=256]
Region 2: Memory at dfef0000 (32-bit, non-prefetchable) [size=64K]
Expansion ROM at dfec0000 [disabled] [size=128K]
Capabilities: [58] AGP version 2.0
Status: RQ=48 Iso- ArqSz=0 Cal=0 SBA+ ITACoh- GART64- HTrans- 64bit-
FW+ AGP3- Rate=x1,x2,x4
Command: RQ=32 ArqSz=0 Cal=0 SBA+ AGP+ GART64- 64bit- FW- Rate=x4
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
0000-001f : dma1
0020-0021 : pic1
0040-005f : timer
0060-006f : keyboard
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
0170-0177 : ide1
01f0-01f7 : ide0
0376-0376 : ide1
03c0-03df : vga+
03f6-03f6 : ide0
0808-080b : ACPI timer
0810-0815 : ACPI CPU throttle
0cf8-0cff : PCI conf1
4000-40ff : PCI CardBus #02
4400-44ff : PCI CardBus #02
c000-cfff : PCI Bus #01
c800-c8ff : 0000:01:00.0
d400-d4ff : 0000:00:12.0
d400-d4ff : via-rhine
d800-d8ff : 0000:00:11.5
d800-d8ff : VIA8233
dc00-dcff : 0000:00:11.6
e000-e01f : 0000:00:10.0
e000-e01f : uhci_hcd
e400-e41f : 0000:00:10.1
e400-e41f : uhci_hcd
e800-e81f : 0000:00:10.2
e800-e81f : uhci_hcd
ec00-ec7f : 0000:00:09.0
fc00-fc0f : 0000:00:11.1
fc00-fc07 : ide0
fc08-fc0f : ide1
00000000-0009fbff : System RAM
0009fc00-0009ffff : reserved
000a0000-000bffff : Video RAM area
000c0000-000cefff : Video ROM
000cf000-000d07ff : Adapter ROM
000d2000-000d7fff : reserved
000f0000-000fffff : System ROM
00100000-1ffeffff : System RAM
00100000-003230d2 : Kernel code
003230d3-0040353f : Kernel data
1fff0000-1fff7fff : ACPI Tables
1fff8000-1fffffff : ACPI Non-volatile Storage
20000000-20000fff : 0000:00:0b.0
20000000-20000fff : yenta_socket
20400000-207fffff : PCI CardBus #02
20800000-20bfffff : PCI CardBus #02
cfd00000-dfcfffff : PCI Bus #01
d0000000-d7ffffff : 0000:01:00.0
dfe00000-dfefffff : PCI Bus #01
dfef0000-dfefffff : 0000:01:00.0
dffff600-dffff6ff : 0000:00:12.0
dffff600-dffff6ff : via-rhine
dffff700-dffff7ff : 0000:00:10.3
dffff700-dffff7ff : ehci_hcd
dffff800-dfffffff : 0000:00:09.0
dffff800-dfffffff : ohci1394
e0000000-e3ffffff : 0000:00:00.0
fec00000-fec00fff : reserved
fee00000-fee00fff : reserved
fff80000-ffffffff : reserved
processor : 0
vendor_id : AuthenticAMD
cpu family : 6
model : 10
model name : mobile AMD Athlon(tm) XP 2600+
stepping : 0
cpu MHz : 1396.543
cache size : 512 KB
fdiv_bug : no
hlt_bug : no
f00f_bug : no
coma_bug : no
fpu : yes
fpu_exception : yes
cpuid level : 1
wp : yes
flags : fpu vme de pse tsc msr pae mce cx8 apic sep mtrr pge mca cmov pat
pse36 mmx fxsr sse syscall mp mmxext 3dnowext 3dnow
bogomips : 2775.44
usable)
BIOS-e820: 000000001fff0000 - 000000001fff8000 (ACPI data)
BIOS-e820: 000000001fff8000 - 0000000020000000 (ACPI NVS)
BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved)
511MB LOWMEM available.
On node 0 totalpages: 131056
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 126960 pages, LIFO batch:16
HighMem zone: 0 pages, LIFO batch:1
DMI 2.3 present.
ACPI: RSDP (v000 AMI ) @ 0x000fa440
ACPI: RSDT (v001 AMIINT VIA_K7 0x00000010 MSFT 0x00000097) @ 0x1fff0000
ACPI: FADT (v001 AMIINT VIA_K7 0x00000011 MSFT 0x00000097) @ 0x1fff0030
ACPI: DSDT (v001 UW F03_____ 0x00001000 INTL 0x02002024) @ 0x00000000
ACPI: PM-Timer IO Port: 0x808
Built 1 zonelists
Kernel command line: root=/dev/hda2
Local APIC disabled by BIOS -- reenabling.
Found and enabled local APIC!
Initializing CPU#0
PID hash table entries: 2048 (order 11: 16384 bytes)
Detected 1994.343 MHz processor.
Using pmtmr for high-res timesource
Console: colour VGA+ 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 515068k/524224k available (2188k kernel code, 8392k reserved, 897k data, 160k
init, 0k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 3964.92 BogoMIPS
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: After vendor identify, caps: 0383fbff c1cbfbff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 512K (64 bytes/line)
CPU: After all inits, caps: 0383fbff c1cbfbff 00000000 00000020
CPU: AMD mobile AMD Athlon(tm) XP 2600+ stepping 00
Enabling fast FPU save and restore... done.
Enabling unmasked SIMD FPU exception support... done.
Checking 'hlt' instruction... OK.
enabled ExtINT on CPU#0
ESR value before enabling vector: 00000000
ESR value after enabling vector: 00000000
Using local APIC timer interrupts.
calibrating APIC timer ...
..... CPU clock speed is 1994.0081 MHz.
..... host bus clock speed is 265.0877 MHz.
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfda81, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040326
ACPI: IRQ9 SCI: Edge set to Level Trigger.
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: Power Resource [LPTP] (off)
ACPI: Embedded Controller [EC0] (gpe 5)
ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
usbcore: registered new driver usbfs
usbcore: registered new driver hub
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 3
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 3 (level, low) -> IRQ 3
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:11.6[C] -> GSI 5 (level, low) -> IRQ 5
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
devfs: 2004-01-31 Richard Gooch ([EMAIL PROTECTED])
devfs: boot_options: 0x0
udf: registering filesystem
ACPI: AC Adapter [AC0] (on-line)
ACPI: Battery Slot [BAT0] (battery present)
ACPI: Power Button (FF) [PWRF]
ACPI: Lid Switch [LID]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU1] (supports C1 C2)
ACPI: Thermal Zone [THRM] (75 C)
lp: driver loaded but no devices found
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected VIA KT400/KT400A/KT600 chipset
agpgart: Maximum main memory to use for agp memory: 439M
spurious 8259A interrupt: IRQ7.
agpgart: AGP aperture is 64M @ 0xe0000000
Serial: 8250/16550 driver $Revision: 1.90 $ 8 ports, IRQ sharing disabled
via-rhine.c:v1.10-LK1.1.20-2.6 May-23-2004 Written by Donald Becker
ACPI: PCI interrupt 0000:00:12.0[A] -> GSI 11 (level, low) -> IRQ 11
eth0: VIA Rhine II at 0xdffff600, 00:03:0d:09:03:61, IRQ 11.
eth0: MII PHY found at address 1, status 0x7869 advertising 05e1 Link 41e1.
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:11.1
ACPI: PCI interrupt 0000:00:11.1[A]: no GSI
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt8235 (rev 00) IDE UDMA133 controller on pci0000:00:11.1
ide0: BM-DMA at 0xfc00-0xfc07, BIOS settings: hda:DMA, hdb:pio
ide1: BM-DMA at 0xfc08-0xfc0f, BIOS settings: hdc:DMA, hdd:pio
hda: FUJITSU MHT2060AH, ATA DISK drive
Using cfq io scheduler
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
hdc: Slimtype COMBO LSC-24082K, ATAPI CD/DVD-ROM drive
ide1 at 0x170-0x177,0x376 on irq 15
hda: max request size: 128KiB
hda: 117210240 sectors (60011 MB) w/8192KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
/dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 >
hdc: ATAPI 24X DVD-ROM CD-R/RW drive, 2048kB Cache, UDMA(33)
Uniform CD-ROM driver Revision: 3.20
ieee1394: Initialized config rom entry `ip1394'
ohci1394: $Rev: 1223 $ Ben Collins <[EMAIL PROTECTED]>
ACPI: PCI interrupt 0000:00:09.0[A] -> GSI 10 (level, low) -> IRQ 10
ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[10] MMIO=[dffff800-dfffffff] Max
Packet=[2048]
ieee1394: raw1394: /dev/raw1394 device initialized
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:10.0[A] -> GSI 11 (level, low) -> IRQ 11
uhci_hcd 0000:00:10.0: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller
uhci_hcd 0000:00:10.0: irq 11, io base 0000e000
uhci_hcd 0000:00:10.0: new USB bus registered, assigned bus number 1
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.1[B] -> GSI 3 (level, low) -> IRQ 3
uhci_hcd 0000:00:10.1: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#2)
uhci_hcd 0000:00:10.1: irq 3, io base 0000e400
uhci_hcd 0000:00:10.1: new USB bus registered, assigned bus number 2
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
ACPI: PCI interrupt 0000:00:10.2[C] -> GSI 5 (level, low) -> IRQ 5
uhci_hcd 0000:00:10.2: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (#3)
uhci_hcd 0000:00:10.2: irq 5, io base 0000e800
uhci_hcd 0000:00:10.2: new USB bus registered, assigned bus number 3
hub 3-0:1.0: USB hub found
hub 3-0:1.0: 2 ports detected
usbcore: registered new driver usbhid
drivers/usb/input/hid-core.c: v2.0:USB HID core driver
mice: PS/2 mouse device common for all mice
i8042.c: Detected active multiplexing controller, rev 1.0.
serio: i8042 AUX0 port at 0x60,0x64 irq 12
serio: i8042 AUX1 port at 0x60,0x64 irq 12
Synaptics Touchpad, model: 1
Firmware: 4.1
Sensor: 8
new absolute packet format
input: SynPS/2 Synaptics TouchPad on isa0060/serio2
serio: i8042 AUX2 port at 0x60,0x64 irq 12
serio: i8042 AUX3 port at 0x60,0x64 irq 12
serio: i8042 KBD port at 0x60,0x64 irq 1
input: AT Translated Set 2 keyboard on isa0060/serio0
oprofile: using NMI interrupt.
NET: Registered protocol family 2
IP: routing cache hash table of 4096 buckets, 32Kbytes
TCP: Hash tables configured (established 32768 bind 65536)
ip_conntrack version 2.1 (4095 buckets, 32760 max) - 296 bytes per conntrack
ip_tables: (C) 2000-2002 Netfilter core team
ipt_recent v0.3.1: Stephen Frost <[EMAIL PROTECTED]>.
http://snowman.net/projects/ipt_recent/
arp_tables: (C) 2002 David S. Miller
NET: Registered protocol family 1
NET: Registered protocol family 17
NET: Registered protocol family 15
powernow: PowerNOW! Technology present. Can scale: frequency and voltage.
powernow: FSB: 132.956 MHz
powernow: Found PSB header at c00fb040
powernow: Table version: 0x12
powernow: Flags: 0x0 (Mobile voltage regulator)
powernow: Settling Time: 100 microseconds.
powernow: Has 34 PST tables. (Only dumping ones relevant to this CPU).
powernow: PST:29 (@c00fb308)
powernow: cpuid: 0x7a0 fsb: 133 maxFID: 0x18 startvid: 0x7
powernow: FID: 0xf (10.5x [1396MHz]) VID: 0xe (1.300V)
powernow: FID: 0x0 (11.0x [1462MHz]) VID: 0xd (1.350V)
powernow: FID: 0x1 (11.5x [1528MHz]) VID: 0xc (1.400V)
powernow: FID: 0x2 (12.0x [1595MHz]) VID: 0xb (1.450V)
powernow: FID: 0x3 (12.5x [1661MHz]) VID: 0xa (1.500V)
powernow: FID: 0x14 (13.0x [1728MHz]) VID: 0x9 (1.550V)
powernow: FID: 0x15 (13.5x [1794MHz]) VID: 0x8 (1.600V)
powernow: FID: 0x18 (15.0x [1994MHz]) VID: 0x7 (1.650V)
powernow: SGTC: 13333
powernow: Minimum speed 1396 MHz. Maximum speed 1994 MHz.
ACPI: (supports S0 S3 S4 S5)
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ieee1394: Host added: ID:BUS[0-00:1023] GUID[00030d4975559cc4]
usb 3-1: new low speed USB device using address 2
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-1
ReiserFS: hda2: using ordered data mode
ReiserFS: hda2: journal params: device hda2, size 8192, journal first block 18, max
trans len 1024, max batch 900, max commit age 30, max trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: replayed 25 transactions in 2 seconds
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Freeing unused kernel memory: 160k freed
Adding 506008k swap on /dev/hda1. Priority:-1 extents:1
SCSI subsystem initialized
NTFS driver 2.1.15 [Flags: R/W MODULE].
snd_via82xx: Unknown parameter `mmap_valid'
ACPI: PCI interrupt 0000:00:11.5[C] -> GSI 5 (level, low) -> IRQ 5
PCI: Setting latency timer of device 0000:00:11.5 to 64
Linux Kernel Card Services
options: [pci] [cardbus] [pm]
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 3 (level, low) -> IRQ 3
Yenta: CardBus bridge found at 0000:00:0b.0 [1734:1032]
Yenta: ISA IRQ mask 0x0090, PCI irq 3
Socket status: 30000006
ACPI: PCI interrupt 0000:00:10.3[D] -> GSI 10 (level, low) -> IRQ 10
ehci_hcd 0000:00:10.3: VIA Technologies, Inc. USB 2.0
ehci_hcd 0000:00:10.3: irq 10, pci mem e0a03700
ehci_hcd 0000:00:10.3: new USB bus registered, assigned bus number 4
ehci_hcd 0000:00:10.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
hub 4-0:1.0: USB hub found
hub 4-0:1.0: 6 ports detected
usb 3-1: USB disconnect, address 2
usb 3-1: new low speed USB device using address 3
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:10.2-1
eth0: Setting full-duplex based on MII #1 link partner capability of 41e1.
fglrx: module license 'Proprietary. (C) 2002 - ATI Technologies, Starnberg, GERMANY'
taints kernel.
[fglrx] Maximum main memory to use for locked dma buffers: 431 MBytes.
ACPI: PCI interrupt 0000:01:00.0[A] -> GSI 11 (level, low) -> IRQ 11
[fglrx] module loaded - fglrx 3.11.1 [Aug 4 2004] on minor 0
[fglrx] AGP detected, AgpState = 0x1f000a07 (hardware caps of chipset)
agpgart: Found an AGP 3.5 compliant device at 0000:00:00.0.
agpgart: Device is in legacy mode, falling back to 2.x
agpgart: Putting AGP V2 device at 0000:00:00.0 into 4x mode
agpgart: Putting AGP V2 device at 0000:01:00.0 into 4x mode
[fglrx] AGP enabled, AgpCommand = 0x1f000304 (selected caps)
[fglrx] free AGP = 54800384
[fglrx] max AGP = 54800384
[fglrx] free LFB = 55574528
[fglrx] max LFB = 55574528
[fglrx] free Inv = 0
[fglrx] max Inv = 0
[fglrx] total Inv = 0
[fglrx] total TIM = 0
[fglrx] total FB = 0
[fglrx] total AGP = 16384
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying
access hardware directly.
atkbd.c: Spurious ACK on isa0060/serio0. Some program, like XFree86, might be trying
access hardware directly.
usb 4-4: new high speed USB device using address 3
Initializing USB Mass Storage driver...
scsi0 : SCSI emulation for USB Mass Storage devices
Vendor: Genesys Model: USB to IDE Disk Rev: 0002
Type: Direct-Access ANSI SCSI revision: 02
SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB)
sda: assuming Write Enabled
sda: assuming drive cache: write through
/dev/scsi/host0/bus0/target0/lun0: p1 < p5 >
Attached scsi removable disk sda at scsi0, channel 0, id 0, lun 0
USB Mass Storage device found at 3
usbcore: registered new driver usb-storage
USB Mass Storage support registered.
scsi: Device offlined - not ready after error recovery: host 0 channel 0 id 0 lun 0
SCSI error : <0 0 0 0> return code = 0x50000
end_request: I/O error, dev sda, sector 36202592
Buffer I/O error on device sda5, logical block 36186464
lost page write due to I/O error on sda5
scsi0 (0:0): rejecting I/O to offline device
Buffer I/O error on device sda5, logical block 36186465
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186466
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186467
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186468
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186469
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186470
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186471
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186472
lost page write due to I/O error on sda5
Buffer I/O error on device sda5, logical block 36186473
lost page write due to I/O error on sda5
scsi0 (0:0): rejecting I/O to offline device
scsi0 (0:0): rejecting I/O to offline device
scsi0 (0:0): rejecting I/O to offline device
scsi0 (0:0): rejecting I/O to offline device
usb 4-4: USB disconnect, address 3
scsi0 (0:0): rejecting I/O to device being removed
hub 4-0:1.0: connect-debounce failed, port 4 disabled
scsi0 (0:0): rejecting I/O to dead device
FAT: unable to read inode block for updating (i_pos 305691)
scsi0 (0:0): rejecting I/O to dead device
FAT bread failed in fat_clusters_flush
slab error in kmem_cache_destroy(): cache `scsi_cmd_cache': Can't free all objects
[<c013bfd5>] kmem_cache_destroy+0x85/0x100
[<e09a1467>] scsi_destroy_command_freelist+0x57/0x90 [scsi_mod]
[<e09a2237>] scsi_host_dev_release+0x27/0x80 [scsi_mod]
[<c0241418>] device_release+0x58/0x60
[<c01f4168>] kobject_cleanup+0x98/0xa0
[<e0990140>] scsi_disk_put+0x30/0x60 [sd_mod]
[<e099051a>] sd_release+0x3a/0x70 [sd_mod]
[<c015982a>] blkdev_put+0x17a/0x1a0
[<c01597ee>] blkdev_put+0x13e/0x1a0
[<c0157392>] deactivate_super+0x62/0xa0
[<c016d79f>] sys_umount+0x3f/0x90
[<c0145648>] do_munmap+0x158/0x1b0
[<c016d807>] sys_oldumount+0x17/0x20
[<c010419b>] syscall_call+0x7/0xb
