J�rgen Heinrich wrote:
Hallo!
Because of the not working ALi based USB 2.0 cards I decided to buy two new cards using NEC chips. (My other "no name" cards with NEC chip are working fine with Linux.)
I bought two Tekram DC-602T USB 2.0 cards. (Chip is NEC D720100AGM, same as on my other cards.)
But unforeseeable they give me a new problem: With Kernel 2.6.6 and lower they seem to work very well, but with Kernel 2.6.7 and higher I got trouble. Whenever I connect a USB 2.0 device, regardless what device type it is, I get
fatal error HC died; cleaning up
I attached my log files.
best regards J�rgen Heinrich
------------------------------------------------------------------------
Oct 2 18:18:43 ws-06 kernel: ehci_hcd 0000:00:0a.2: fatal error
Oct 2 18:18:43 ws-06 kernel: ehci_hcd 0000:00:0a.2: HC died; cleaning up
------------------------------------------------------------------------
Oct 2 18:18:36 ws-06 kernel: usbcore: registered new driver usbfs
Oct 2 18:18:36 ws-06 kernel: usbcore: registered new driver hub
Oct 2 18:18:36 ws-06 kernel: PCI: Found IRQ 11 for device 0000:00:0a.2
Oct 2 18:18:36 ws-06 kernel: PCI: Sharing IRQ 11 with 0000:00:0c.0
Oct 2 18:18:36 ws-06 kernel: PCI: Sharing IRQ 11 with 0000:00:0d.0
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: NEC Corporation USB 2.0
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: irq 11, pci mem 0xd5800000
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10
Oct 2 18:18:36 ws-06 kernel: usb usb1: Product: NEC Corporation USB 2.0
Oct 2 18:18:36 ws-06 kernel: usb usb1: Manufacturer: Linux 2.6.9-rc3-mm1 ehci_hcd
Oct 2 18:18:36 ws-06 kernel: usb usb1: SerialNumber: 0000:00:0a.2
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: USB hub found
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: 5 ports detected
Oct 2 18:18:36 ws-06 kernel: PCI: Found IRQ 9 for device 0000:00:0d.3
Oct 2 18:18:36 ws-06 kernel: PCI: Sharing IRQ 9 with 0000:00:04.2
Oct 2 18:18:36 ws-06 kernel: PCI: Sharing IRQ 9 with 0000:00:09.0
Oct 2 18:18:36 ws-06 kernel: PCI: Sharing IRQ 9 with 0000:00:0a.1
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: ALi Corporation USB 2.0 Controller
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: irq 9, pci mem 0xd2800000
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: new USB bus registered, assigned bus number 2
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10
Oct 2 18:18:36 ws-06 kernel: usb usb2: Product: ALi Corporation USB 2.0 Controller
Oct 2 18:18:36 ws-06 kernel: usb usb2: Manufacturer: Linux 2.6.9-rc3-mm1 ehci_hcd
Oct 2 18:18:36 ws-06 kernel: usb usb2: SerialNumber: 0000:00:0d.3
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: USB hub found
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: 6 ports detected
Oct 2 18:18:36 ws-06 kernel: usb 2-5: new high speed USB device using address 2
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: USB hub found
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: 4 ports detected
------------------------------------------------------------------------
Oct 2 18:18:36 ws-06 kernel: ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset portroute 1 0 1 0 0 Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset hcc_params 0002 thresh 0 uframes 256/512/1024
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: init command 010009 (park)=0 ithresh=1 period=256 RUN
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0a.2: supports USB remote wakeup
Oct 2 18:18:36 ws-06 kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1
Oct 2 18:18:36 ws-06 kernel: usb usb1: default language 0x0409
Oct 2 18:18:36 ws-06 kernel: usb usb1: hotplug
Oct 2 18:18:36 ws-06 kernel: usb usb1: adding 1-0:1.0 (config #1, interface 0)
Oct 2 18:18:36 ws-06 kernel: usb 1-0:1.0: hotplug
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: usb_probe_interface
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: usb_probe_interface - got id
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: standalone hub
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: individual port power switching
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: individual port over-current protection
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: Single TT
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: TT requires at most 8 FS bit times
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: power on to power good time: 20ms
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: local power source is good
Oct 2 18:18:36 ws-06 kernel: hub 1-0:1.0: enabling power on all ports
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: reset hcs_params 0x103216 dbg=1 cc=3 pcc=2 ordered ports=6
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: reset hcc_params 7002 thresh 0 uframes 256/512/1024
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: capability 0001 at 70
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: init command 010009 (park)=0 ithresh=1 period=256 RUN
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: supports USB remote wakeup
Oct 2 18:18:36 ws-06 kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1
Oct 2 18:18:36 ws-06 kernel: usb usb2: default language 0x0409
Oct 2 18:18:36 ws-06 kernel: usb usb2: hotplug
Oct 2 18:18:36 ws-06 kernel: usb usb2: adding 2-0:1.0 (config #1, interface 0)
Oct 2 18:18:36 ws-06 kernel: usb 2-0:1.0: hotplug
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: usb_probe_interface
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: usb_probe_interface - got id
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: standalone hub
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: individual port power switching
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: individual port over-current protection
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: Single TT
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: TT requires at most 8 FS bit times
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: power on to power good time: 20ms
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: local power source is good
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: enabling power on all ports
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: GetStatus port 5 status 001803 POWER sig=j CSC CONNECT
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: port 5, status 0501, change 0001, 480 Mb/s
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: debounce: port 5: total 100ms stable 100ms status 0x501
Oct 2 18:18:36 ws-06 kernel: hub 2-0:1.0: port 5 not reset yet, waiting 50ms
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: port 5 high speed
Oct 2 18:18:36 ws-06 kernel: ehci_hcd 0000:00:0d.3: GetStatus port 5 status 001005 POWER sig=se0 PE CONNECT
Oct 2 18:18:36 ws-06 kernel: usb 2-5: new device strings: Mfr=0, Product=0, SerialNumber=0
Oct 2 18:18:36 ws-06 kernel: usb 2-5: hotplug
Oct 2 18:18:36 ws-06 kernel: usb 2-5: adding 2-5:1.0 (config #1, interface 0)
Oct 2 18:18:36 ws-06 kernel: usb 2-5:1.0: hotplug
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: usb_probe_interface
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: usb_probe_interface - got id
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: standalone hub
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: individual port power switching
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: individual port over-current protection
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: TT per port
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: TT requires at most 8 FS bit times
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: Port indicators are supported
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: power on to power good time: 100ms
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: local power source is good
Oct 2 18:18:36 ws-06 kernel: hub 2-5:1.0: enabling power on all ports
Oct 2 18:18:37 ws-06 kernel: drivers/usb/host/ehci-sched.c: scheduled qh dd37b100 usecs 7/0 period 256.0 starting 255.0 (gap 0)
Oct 2 18:18:43 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset command 01000b (park)=0 ithresh=1 period=256 Reset RUN
Hallo!
I did some investigations with my two Tekram cards, and I found out it is the
reset after the fatal error state that kills the HC.
Now I applied following patch to remove the reset.
--- ehci-hcd.c.BAK 2004-10-05 19:02:10.000000000 +0200 +++ ehci-hcd.c 2004-10-08 12:39:07.000000000 +0200 @@ -791,7 +791,7 @@ if (unlikely ((status & STS_FATAL) != 0)) { ehci_err (ehci, "fatal error\n"); dead: - ehci_reset (ehci); +// ehci_reset (ehci); /* generic layer kills/unlinks all urbs, then * uses ehci_stop to clean up the rest */
Now the Tekram USB 2.0 cards seem to work very well, but this is no real solution,
of course. It is only a very ugly "work around".
As you can see in my log files, I now get very much errors about an "over-current change".
I noticed these many over-current changes also with the (working) kernels 2.6.6 and lower
and 2.4.27 (work very well with the Tekram cards, too).
I think the error message about that over-current changes are the one that made
status STS_FATAL and so kills the HC.
best regards J�rgen Heinrich
Oct 8 17:10:34 ws-06 kernel: ehci_hcd: block sizes: qh 128 qtd 96 itd 192 sitd 96 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset hcs_params 0x2395 dbg=0 cc=2 pcc=3 ports=5 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset portroute 1 0 1 0 0 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset hcc_params 0002 thresh 0 uframes 256/512/1024 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: init command 010009 (park)=0 ithresh=1 period=256 RUN Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: supports USB remote wakeup Oct 8 17:10:34 ws-06 kernel: usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 Oct 8 17:10:34 ws-06 kernel: usb usb1: default language 0x0409 Oct 8 17:10:34 ws-06 kernel: usb usb1: hotplug Oct 8 17:10:34 ws-06 kernel: usb usb1: adding 1-0:1.0 (config #1, interface 0) Oct 8 17:10:34 ws-06 kernel: usb 1-0:1.0: hotplug Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: usb_probe_interface Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: usb_probe_interface - got id Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: standalone hub Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: individual port power switching Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: individual port over-current protection Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: Single TT Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: TT requires at most 8 FS bit times Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: power on to power good time: 20ms Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: local power source is good Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: reset hcs_params 0x103216 dbg=1 cc=3 pcc=2 ordered ports=6 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: reset hcc_params 7002 thresh 0 uframes 256/512/1024 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: capability 0001 at 70 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: init command 010009 (park)=0 ithresh=1 period=256 RUN Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: supports USB remote wakeup Oct 8 17:10:34 ws-06 kernel: usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 Oct 8 17:10:34 ws-06 kernel: usb usb2: default language 0x0409 Oct 8 17:10:34 ws-06 kernel: usb usb2: hotplug Oct 8 17:10:34 ws-06 kernel: usb usb2: adding 2-0:1.0 (config #1, interface 0) Oct 8 17:10:34 ws-06 kernel: usb 2-0:1.0: hotplug Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: usb_probe_interface Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: usb_probe_interface - got id Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: standalone hub Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: individual port power switching Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: individual port over-current protection Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: Single TT Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: TT requires at most 8 FS bit times Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: power on to power good time: 20ms Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: local power source is good Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: enabling power on all ports Oct 8 17:10:50 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT Oct 8 17:10:50 ws-06 kernel: hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s Oct 8 17:10:50 ws-06 kernel: hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 Oct 8 17:10:50 ws-06 kernel: hub 1-0:1.0: port 2 not reset yet, waiting 50ms Oct 8 17:10:50 ws-06 kernel: ehci_hcd 0000:00:0a.2: port 2 high speed Oct 8 17:10:50 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 2 status 001005 POWER sig=se0 PE CONNECT Oct 8 17:10:50 ws-06 kernel: usb 1-2: new device strings: Mfr=1, Product=2, SerialNumber=0 Oct 8 17:10:50 ws-06 kernel: usb 1-2: default language 0x0409 Oct 8 17:10:50 ws-06 kernel: usb 1-2: hotplug Oct 8 17:10:50 ws-06 kernel: usb 1-2: adding 1-2:1.0 (config #1, interface 0) Oct 8 17:10:50 ws-06 kernel: usb 1-2:1.0: hotplug Oct 8 17:10:50 ws-06 kernel: usb-storage 1-2:1.0: usb_probe_interface Oct 8 17:10:50 ws-06 kernel: usb-storage 1-2:1.0: usb_probe_interface - got id Oct 8 17:10:50 ws-06 kernel: usb-storage: USB Mass Storage device detected Oct 8 17:10:50 ws-06 kernel: usb-storage: -- associate_dev Oct 8 17:10:50 ws-06 kernel: usb-storage: Vendor: 0x0dc4, Product: 0x0107, Revision: 0x0801 Oct 8 17:10:50 ws-06 kernel: usb-storage: Interface Subclass: 0x06, Protocol: 0x50 Oct 8 17:10:50 ws-06 kernel: usb-storage: Vendor: Macpower Peripherals Ltd., Product: MP-HUSB3W Oct 8 17:10:50 ws-06 kernel: usb-storage: Transport: Bulk Oct 8 17:10:50 ws-06 kernel: usb-storage: Protocol: Transparent SCSI Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_control_msg: rq=fe rqtype=a1 value=0000 index=00 len=1 Oct 8 17:10:50 ws-06 kernel: usb-storage: GetMaxLUN command result is 1, data is 0 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Command INQUIRY (6 bytes) Oct 8 17:10:50 ws-06 kernel: usb-storage: 12 00 00 00 24 00 Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk Command S 0x43425355 T 0x122d L 36 F 128 Trg 0 LUN 0 CL 6 Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 31/31 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk command transfer result=0 Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 36 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 36/36 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk data transfer result 0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: Attempting to get CSW... Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 13/13 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk status result = 0 Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk Status S 0x53425355 T 0x122d R 0 Stat 0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Command TEST_UNIT_READY (6 bytes) Oct 8 17:10:50 ws-06 kernel: usb-storage: 00 00 00 00 00 00 Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk Command S 0x43425355 T 0x122e L 0 F 0 Trg 0 LUN 0 CL 6 Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 31/31 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk command transfer result=0 Oct 8 17:10:50 ws-06 kernel: usb-storage: Attempting to get CSW... Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 13/13 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk status result = 0 Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk Status S 0x53425355 T 0x122e R 0 Stat 0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Command READ_CAPACITY (10 bytes) Oct 8 17:10:50 ws-06 kernel: usb-storage: 25 00 00 00 00 00 00 00 00 00 Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk Command S 0x43425355 T 0x122f L 8 F 128 Trg 0 LUN 0 CL 10 Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 31/31 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk command transfer result=0 Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 8 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 8/8 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk data transfer result 0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: Attempting to get CSW... Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 13/13 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk status result = 0 Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk Status S 0x53425355 T 0x122f R 0 Stat 0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Command READ_10 (10 bytes) Oct 8 17:10:50 ws-06 kernel: usb-storage: 28 00 00 00 00 00 00 00 08 00 Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk Command S 0x43425355 T 0x1230 L 4096 F 128 Trg 0 LUN 0 CL 10 Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 31 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 31/31 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk command transfer result=0 Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_sglist: xfer 4096 bytes, 1 entries Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 4096/4096 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk data transfer result 0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: Attempting to get CSW... Oct 8 17:10:50 ws-06 kernel: usb-storage: usb_stor_bulk_transfer_buf: xfer 13 bytes Oct 8 17:10:50 ws-06 kernel: usb-storage: Status code 0; transferred 13/13 Oct 8 17:10:50 ws-06 kernel: usb-storage: -- transfer complete Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk status result = 0 Oct 8 17:10:50 ws-06 kernel: usb-storage: Bulk Status S 0x53425355 T 0x1230 R 0 Stat 0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x0 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Bad target number (1:0) Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x40000 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Bad target number (2:0) Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x40000 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Bad target number (3:0) Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x40000 Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Bad target number (4:0) Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x40000 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Bad target number (5:0) Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x40000 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Bad target number (6:0) Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x40000 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:10:50 ws-06 kernel: usb-storage: Bad target number (7:0) Oct 8 17:10:50 ws-06 kernel: usb-storage: scsi cmd done, result=0x40000 Oct 8 17:10:50 ws-06 kernel: usb-storage: *** thread sleeping. Oct 8 17:10:50 ws-06 kernel: USB Mass Storage device found at 2 Oct 8 17:11:01 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 1 status 000030 sig=se0 OCC OC Oct 8 17:11:01 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:11:02 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 1 status 001020 POWER sig=se0 OCC Oct 8 17:11:02 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:11:25 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 1 status 000030 sig=se0 OCC OC Oct 8 17:11:25 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:11:27 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 1 status 000030 sig=se0 OCC OC Oct 8 17:11:27 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:11:28 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 1 status 001020 POWER sig=se0 OCC Oct 8 17:11:28 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:11:30 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 1 status 000030 sig=se0 OCC OC Oct 8 17:11:30 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:11:32 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 1 status 000030 sig=se0 OCC OC Oct 8 17:11:32 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:11:33 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 1 status 001020 POWER sig=se0 OCC Oct 8 17:11:33 ws-06 kernel: hub 1-0:1.0: enabling power on all ports Oct 8 17:11:42 ws-06 kernel: ehci_hcd 0000:00:0a.2: GetStatus port 2 status 00100a POWER sig=se0 PEC CSC Oct 8 17:11:42 ws-06 kernel: hub 1-0:1.0: port 2, status 0100, change 0003, 12 Mb/s Oct 8 17:11:42 ws-06 kernel: usb 1-2: usb_disable_device nuking all URBs Oct 8 17:11:42 ws-06 kernel: usb 1-2: unregistering interface 1-2:1.0 Oct 8 17:11:42 ws-06 kernel: usb-storage: storage_disconnect() called Oct 8 17:11:42 ws-06 kernel: usb-storage: usb_stor_stop_transport called Oct 8 17:11:42 ws-06 kernel: usb-storage: -- usb_stor_release_resources Oct 8 17:11:42 ws-06 kernel: usb-storage: -- sending exit command to thread Oct 8 17:11:42 ws-06 kernel: usb-storage: *** thread awakened. Oct 8 17:11:42 ws-06 kernel: usb-storage: -- exit command received Oct 8 17:11:42 ws-06 kernel: usb-storage: -- dissociate_dev Oct 8 17:11:42 ws-06 kernel: usb 1-2:1.0: hotplug Oct 8 17:11:42 ws-06 kernel: usb 1-2: unregistering device Oct 8 17:11:42 ws-06 kernel: usb 1-2: hotplug Oct 8 17:11:42 ws-06 kernel: hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 Oct 8 17:11:51 ws-06 kernel: usb-storage: usb_stor_exit() called Oct 8 17:11:51 ws-06 kernel: usb-storage: -- calling usb_deregister() Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: roothub graceful disconnect Oct 8 17:11:56 ws-06 kernel: usb usb1: usb_disable_device nuking all URBs Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: shutdown urb dfa0d5c0 pipe 40408180 ep1in-intr Oct 8 17:11:56 ws-06 kernel: usb usb1: unregistering interface 1-0:1.0 Oct 8 17:11:56 ws-06 kernel: usb 1-0:1.0: hotplug Oct 8 17:11:56 ws-06 kernel: usb usb1: unregistering device Oct 8 17:11:56 ws-06 kernel: usb usb1: hotplug Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: stop Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: reset command 01000b (park)=0 ithresh=1 period=256 Reset RUN Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: irq normal 23 err 0 reclaim 11 (lost 0) Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: complete 23 unlink 0 Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: ehci_stop completed status 1000 Halt Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: roothub graceful disconnect Oct 8 17:11:56 ws-06 kernel: usb usb2: usb_disable_device nuking all URBs Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: shutdown urb dfa0d2c0 pipe 40408180 ep1in-intr Oct 8 17:11:56 ws-06 kernel: usb usb2: unregistering interface 2-0:1.0 Oct 8 17:11:56 ws-06 kernel: usb 2-0:1.0: hotplug Oct 8 17:11:56 ws-06 kernel: usb usb2: unregistering device Oct 8 17:11:56 ws-06 kernel: usb usb2: hotplug Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: stop Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: reset command 01000b (park)=0 ithresh=1 period=256 Reset RUN Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: irq normal 0 err 0 reclaim 0 (lost 0) Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: complete 0 unlink 0 Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: ehci_stop completed status 1000 Halt Oct 8 17:11:56 ws-06 kernel: usbcore: khubd exiting
Oct 8 17:10:34 ws-06 kernel: usbcore: registered new driver usbfs Oct 8 17:10:34 ws-06 kernel: usbcore: registered new driver hub Oct 8 17:10:34 ws-06 kernel: PCI: Found IRQ 11 for device 0000:00:0a.2 Oct 8 17:10:34 ws-06 kernel: PCI: Sharing IRQ 11 with 0000:00:0c.0 Oct 8 17:10:34 ws-06 kernel: PCI: Sharing IRQ 11 with 0000:00:0d.0 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: NEC Corporation USB 2.0 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: irq 11, pci mem e08fc000 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: new USB bus registered, assigned bus number 1 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0a.2: USB 2.0 enabled, EHCI 0.95, driver 2004-May-10 Oct 8 17:10:34 ws-06 kernel: usb usb1: Product: NEC Corporation USB 2.0 Oct 8 17:10:34 ws-06 kernel: usb usb1: Manufacturer: Linux 2.6.9-rc3 ehci_hcd Oct 8 17:10:34 ws-06 kernel: usb usb1: SerialNumber: 0000:00:0a.2 Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: USB hub found Oct 8 17:10:34 ws-06 kernel: hub 1-0:1.0: 5 ports detected Oct 8 17:10:34 ws-06 kernel: PCI: Found IRQ 9 for device 0000:00:0d.3 Oct 8 17:10:34 ws-06 kernel: PCI: Sharing IRQ 9 with 0000:00:04.2 Oct 8 17:10:34 ws-06 kernel: PCI: Sharing IRQ 9 with 0000:00:09.0 Oct 8 17:10:34 ws-06 kernel: PCI: Sharing IRQ 9 with 0000:00:0a.1 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: ALi Corporation USB 2.0 Controller Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: irq 9, pci mem e08fe000 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: new USB bus registered, assigned bus number 2 Oct 8 17:10:34 ws-06 kernel: ehci_hcd 0000:00:0d.3: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 Oct 8 17:10:34 ws-06 kernel: usb usb2: Product: ALi Corporation USB 2.0 Controller Oct 8 17:10:34 ws-06 kernel: usb usb2: Manufacturer: Linux 2.6.9-rc3 ehci_hcd Oct 8 17:10:34 ws-06 kernel: usb usb2: SerialNumber: 0000:00:0d.3 Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: USB hub found Oct 8 17:10:34 ws-06 kernel: hub 2-0:1.0: 6 ports detected Oct 8 17:10:37 ws-06 kernel: Initializing USB Mass Storage driver... Oct 8 17:10:37 ws-06 kernel: usbcore: registered new driver usb-storage Oct 8 17:10:37 ws-06 kernel: USB Mass Storage support registered. Oct 8 17:10:50 ws-06 kernel: usb 1-2: new high speed USB device using address 2 Oct 8 17:10:50 ws-06 kernel: usb 1-2: Product: MP-HUSB3W Oct 8 17:10:50 ws-06 kernel: usb 1-2: Manufacturer: Macpower Peripherals Ltd. Oct 8 17:10:50 ws-06 kernel: scsi3 : SCSI emulation for USB Mass Storage devices Oct 8 17:10:50 ws-06 kernel: Vendor: IC35L040 Model: AVVN07-0 Rev: VA2O Oct 8 17:10:50 ws-06 kernel: Type: Direct-Access ANSI SCSI revision: 02 Oct 8 17:10:50 ws-06 kernel: SCSI device sda: 80416800 512-byte hdwr sectors (41173 MB) Oct 8 17:10:50 ws-06 kernel: sda:<7>usb-storage: queuecommand called Oct 8 17:10:50 ws-06 kernel: Attached scsi disk sda at scsi3, channel 0, id 0, lun 0 Oct 8 17:10:50 ws-06 kernel: Attached scsi generic sg2 at scsi3, channel 0, id 0, lun 0, type 0 Oct 8 17:11:42 ws-06 kernel: usb 1-2: USB disconnect, address 2 Oct 8 17:11:51 ws-06 kernel: usbcore: deregistering driver usb-storage Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: remove, state 1 Oct 8 17:11:56 ws-06 kernel: usb usb1: USB disconnect, address 1 Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0a.2: USB bus 1 deregistered Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: remove, state 1 Oct 8 17:11:56 ws-06 kernel: usb usb2: USB disconnect, address 1 Oct 8 17:11:56 ws-06 kernel: ehci_hcd 0000:00:0d.3: USB bus 2 deregistered Oct 8 17:11:56 ws-06 kernel: usbcore: deregistering driver usbfs Oct 8 17:11:56 ws-06 kernel: usbcore: deregistering driver hub
Oct 8 17:10:49 ws-06 kernel: ehci_hcd 0000:00:0a.2: fatal error Oct 8 17:10:50 ws-06 kernel: sda: assuming drive cache: write through Oct 8 17:10:50 ws-06 kernel: sda1 Oct 8 17:11:01 ws-06 kernel: ehci_hcd 0000:00:0a.2: fatal error Oct 8 17:11:01 ws-06 kernel: hub 1-0:1.0: over-current change on port 1 Oct 8 17:11:02 ws-06 kernel: hub 1-0:1.0: over-current change on port 1 Oct 8 17:11:25 ws-06 kernel: ehci_hcd 0000:00:0a.2: fatal error Oct 8 17:11:25 ws-06 kernel: hub 1-0:1.0: over-current change on port 1 Oct 8 17:11:27 ws-06 kernel: ehci_hcd 0000:00:0a.2: fatal error Oct 8 17:11:27 ws-06 kernel: hub 1-0:1.0: over-current change on port 1 Oct 8 17:11:28 ws-06 kernel: hub 1-0:1.0: over-current change on port 1 Oct 8 17:11:30 ws-06 kernel: ehci_hcd 0000:00:0a.2: fatal error Oct 8 17:11:30 ws-06 kernel: hub 1-0:1.0: over-current change on port 1 Oct 8 17:11:32 ws-06 kernel: ehci_hcd 0000:00:0a.2: fatal error Oct 8 17:11:32 ws-06 kernel: hub 1-0:1.0: over-current change on port 1 Oct 8 17:11:33 ws-06 kernel: hub 1-0:1.0: over-current change on port 1
