[EMAIL PROTECTED] wrote:
On Thu, 21 Oct 2004, Alan Stern wrote:
On Thu, 21 Oct 2004 [EMAIL PROTECTED] wrote:
After successful write on USB DVD-R writer (HP-200j), system oops's when unpluging USB device. Same thing with 2.6.9-rc2mm1.
Try applying this patch:
http://marc.theaimsgroup.com/?l=linux-usb-devel&m=109744234829347&q=raw
Patch applied. I have done the tests at still no good. I connected and disconnected the writer a couple of times. WHen I didn't read/write on the CD there is no OOPS when disconnecting. But after reading CD there was OOPS when disconnecting. See below. Decoded OOPS - see more below.
Can you turn on the usb-storage verbose debugging option in the kernel configuration and then try running your test over again? Be sure also to set up /etc/syslog.conf to capture debug-level kernel messages.
Well, I think I must admit I was wrong.
I have done some tests and there was no ooops after succesful writing or after unmounting device. The oops is when I unplug USB-DVD-Recorder when there is already mounted device on it.
Then there is state transition from NULL->cancel and kernel oops! See oops and decoded oops below:
The null state and and oops are becuase of this http://marc.theaimsgroup.com/?l=linux-scsi&m=109733573729283&w=2
Oct 26 09:10:03 localhost kernel: usb 1-1: unregistering interface 1-1:2.0 Oct 26 09:10:03 localhost kernel: usb-storage: storage_disconnect() called Oct 26 09:10:03 localhost kernel: usb-storage: usb_stor_stop_transport called Oct 26 09:10:03 localhost kernel: target0:0:0: Illegal state transition <NULL>->cancel Oct 26 09:10:03 localhost kernel: Badness in scsi_device_set_state at drivers/scsi/scsi_lib.c:1713 Oct 26 09:10:03 localhost kernel: [scsi_device_set_state+199/210] scsi_device_set_state+0xc7/0xd2 Oct 26 09:10:03 localhost kernel: [scsi_device_cancel+38/257] scsi_device_cancel+0x26/0x101 Oct 26 09:10:03 localhost kernel: [scsi_device_cancel_cb+0/12] scsi_device_cancel_cb+0x0/0xc Oct 26 09:10:03 localhost kernel: [device_for_each_child+52/91] device_for_each_child+0x34/0x5b Oct 26 09:10:03 localhost kernel: [scsi_host_cancel+37/176] scsi_host_cancel+0x25/0xb0 Oct 26 09:10:03 localhost kernel: [dput+27/569] dput+0x1b/0x239 Oct 26 09:10:03 localhost kernel: [device_del+101/117] device_del+0x65/0x75 Oct 26 09:10:03 localhost kernel: [scsi_remove_device+112/128] scsi_remove_device+0x70/0x80 Oct 26 09:10:03 localhost kernel: [scsi_forget_host+112/140] scsi_forget_host+0x70/0x8c Oct 26 09:10:03 localhost kernel: [scsi_remove_host+17/75] scsi_remove_host+0x11/0x4b Oct 26 09:10:03 localhost kernel: [pg0+268324036/1068930048] storage_disconnect+0x7a/0x89 [usb_storage] Oct 26 09:10:03 localhost kernel: [usb_unbind_interface+51/94] usb_unbind_interface+0x33/0x5e Oct 26 09:10:03 localhost kernel: [device_release_driver+60/70] device_release_driver+0x3c/0x46 Oct 26 09:10:03 localhost kernel: [bus_remove_device+63/118] bus_remove_device+0x3f/0x76 Oct 26 09:10:03 localhost kernel: [device_del+86/117] device_del+0x56/0x75 Oct 26 09:10:03 localhost kernel: [usb_disable_device+194/301] usb_disable_device+0xc2/0x12d Oct 26 09:10:03 localhost kernel: [usb_disconnect+173/342] usb_disconnect+0xad/0x156 Oct 26 09:10:03 localhost kernel: [hub_port_connect_change+179/971] hub_port_connect_change+0xb3/0x3cb Oct 26 09:10:03 localhost kernel: [hub_events+824/1057] hub_events+0x338/0x421 Oct 26 09:10:03 localhost kernel: [prepare_to_wait+76/104] prepare_to_wait+0x4c/0x68 Oct 26 09:10:03 localhost kernel: [hub_thread+0/258] hub_thread+0x0/0x102 Oct 26 09:10:03 localhost kernel: [hub_thread+30/258] hub_thread+0x1e/0x102 Oct 26 09:10:03 localhost kernel: [autoremove_wake_function+0/45] autoremove_wake_function+0x0/0x2d Oct 26 09:10:03 localhost kernel: [hub_thread+0/258] hub_thread+0x0/0x102 Oct 26 09:10:03 localhost kernel: [autoremove_wake_function+0/45] autoremove_wake_function+0x0/0x2d Oct 26 09:10:03 localhost kernel: [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb Oct 26 09:10:03 localhost kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Oct 26 09:10:03 localhost kernel: printing eip: Oct 26 09:10:03 localhost kernel: c025287b Oct 26 09:10:03 localhost kernel: *pde = 00000000 Oct 26 09:10:03 localhost kernel: Oops: 0000 [#1] Oct 26 09:10:03 localhost kernel: PREEMPT Oct 26 09:10:03 localhost kernel: Modules linked in: nls_iso8859_2 isofs nls_base zlib_inflate sr_mod usb_storage pktcdvd lp button processor ac battery ipt_REJECT ipt_pkttype ipt_LOG ipt_state ipt_multiport ipt_conntrack iptable_mangle ip_nat_irc ip_nat_tftp ip_nat_ftp iptable_nat ip_conntrack_irc ip_conntrack_tftp ip_conntrack_ftp ip_conntrack iptable_filter ip_tables usbhid ipw2100 ieee80211 ieee80211_crypt 8139too mii crc32 hw_random intel_agp agpgart parport_pc parport irtty_sir sir_dev pcspkr Oct 26 09:10:03 localhost kernel: CPU: 0 Oct 26 09:10:03 localhost kernel: EIP: 0060:[scsi_device_cancel+57/257] Not tainted VLI Oct 26 09:10:03 localhost kernel: EFLAGS: 00010013 (2.6.9-rc4mm1) Oct 26 09:10:03 localhost kernel: EIP is at scsi_device_cancel+0x39/0x101 Oct 26 09:10:03 localhost kernel: eax: 00000001 ebx: fffffff0 ecx: 00000001 edx: 00000000 Oct 26 09:10:03 localhost kernel: esi: cb794a80 edi: c13d1e5c ebp: 00000282 esp: c13d1e58 Oct 26 09:10:03 localhost kernel: ds: 007b es: 007b ss: 0068 Oct 26 09:10:03 localhost kernel: Process khubd (pid: 145, threadinfo=c13d0000 task=c12655a0) Oct 26 09:10:03 localhost kernel: Stack: 00000000 c13d1e5c c13d1e5c cb794c04 cdcb78b4 c03ed008 c0252982 c023414f Oct 26 09:10:03 localhost kernel: c13d1e90 cdcb7800 d048cea0 cbae60c0 cf4641c0 c02529b3 00000000 cb0f8054 Oct 26 09:10:03 localhost kernel: c0159d5c cdd45da8 cb794c04 cdd45d84 cdd45d84 cb794c04 c02340fb cdd45c00 Oct 26 09:10:03 localhost kernel: Call Trace: Oct 26 09:10:03 localhost kernel: [scsi_device_cancel_cb+0/12] scsi_device_cancel_cb+0x0/0xc Oct 26 09:10:03 localhost kernel: [device_for_each_child+52/91] device_for_each_child+0x34/0x5b Oct 26 09:10:03 localhost kernel: [scsi_host_cancel+37/176] scsi_host_cancel+0x25/0xb0 Oct 26 09:10:03 localhost kernel: [dput+27/569] dput+0x1b/0x239 Oct 26 09:10:03 localhost kernel: [device_del+101/117] device_del+0x65/0x75 Oct 26 09:10:03 localhost kernel: [scsi_remove_device+112/128] scsi_remove_device+0x70/0x80 Oct 26 09:10:03 localhost kernel: [scsi_forget_host+112/140] scsi_forget_host+0x70/0x8c Oct 26 09:10:03 localhost kernel: [scsi_remove_host+17/75] scsi_remove_host+0x11/0x4b Oct 26 09:10:03 localhost kernel: [pg0+268324036/1068930048] storage_disconnect+0x7a/0x89 [usb_storage] Oct 26 09:10:03 localhost kernel: [usb_unbind_interface+51/94] usb_unbind_interface+0x33/0x5e Oct 26 09:10:03 localhost kernel: [device_release_driver+60/70] device_release_driver+0x3c/0x46 Oct 26 09:10:03 localhost kernel: [bus_remove_device+63/118] bus_remove_device+0x3f/0x76 Oct 26 09:10:03 localhost kernel: [device_del+86/117] device_del+0x56/0x75 Oct 26 09:10:03 localhost kernel: [usb_disable_device+194/301] usb_disable_device+0xc2/0x12d Oct 26 09:10:03 localhost kernel: [usb_disconnect+173/342] usb_disconnect+0xad/0x156 Oct 26 09:10:03 localhost kernel: [hub_port_connect_change+179/971] hub_port_connect_change+0xb3/0x3cb Oct 26 09:10:03 localhost kernel: [hub_events+824/1057] hub_events+0x338/0x421 Oct 26 09:10:03 localhost kernel: [prepare_to_wait+76/104] prepare_to_wait+0x4c/0x68 Oct 26 09:10:03 localhost kernel: [hub_thread+0/258] hub_thread+0x0/0x102 Oct 26 09:10:03 localhost kernel: [hub_thread+30/258] hub_thread+0x1e/0x102 Oct 26 09:10:03 localhost kernel: [autoremove_wake_function+0/45] autoremove_wake_function+0x0/0x2d Oct 26 09:10:03 localhost kernel: [hub_thread+0/258] hub_thread+0x0/0x102 Oct 26 09:10:03 localhost kernel: [autoremove_wake_function+0/45] autoremove_wake_function+0x0/0x2d Oct 26 09:10:03 localhost kernel: [kernel_thread_helper+5/11] kernel_thread_helper+0x5/0xb Oct 26 09:10:03 localhost kernel: Code: 14 24 89 c7 ba 03 00 00 00 89 44 24 04 89 44 24 08 89 f0 e8 b2 41 00 00 9c 5d fa b8 01 00 00 00 e8 b6 1c ec ff 8b 56 1c 8d 5a f0 <8b> 43 10 0f 18 00 90 8d 46 1c 39 c2 74 40 8b 83 b8 00 00 00 85 Oct 26 09:10:03 localhost kernel: <6>note: khubd[145] exited with preempt_count 1 Oct 26 09:10:22 localhost kernel: scsi0 (0:0): rejecting I/O to dead device Oct 26 09:10:22 localhost kernel: SCSI error: host 0 id 0 lun 0 return code = 4000000 Oct 26 09:10:22 localhost kernel: ^ISense class 0, sense error 0, extended sense 0 ------------------------------------ END OF OOPS ------------------------------------ ----------------------------------- DECODED OOPS ------------------------------------ ksymoops 2.4.9 on i686 2.6.9-rc4mm1. Options used -V (default) -k /proc/ksyms (default) -l /proc/modules (default) -o /lib/modules/2.6.9-rc4mm1/ (default) -m /boot/System.map-2.6.9-rc4mm1 (default)
Warning: You did not tell me where to find symbol information. I will assume that the log matches the kernel and modules that are running right now and I'll use the default options above for symbol resolution. If the current kernel and/or modules do not match the log, you can get more accurate output by telling me the kernel version and where to find map, modules, ksyms etc. ksymoops -h explains the options.
Error (regular_file): read_ksyms stat /proc/ksyms failed No modules in ksyms, skipping objects No ksyms, skipping lsmod Oct 26 09:08:36 localhost kernel: Machine check exception polling timer started. Oct 26 09:08:36 localhost kernel: 8139too Fast Ethernet driver 0.9.27 Oct 26 09:08:52 localhost kernel: cs: IO port probe 0x0100-0x04ff: excluding 0x400-0x407 0x4d0-0x4d7 Oct 26 09:08:52 localhost kernel: cs: IO port probe 0x0800-0x08ff: clean. Oct 26 09:08:52 localhost kernel: cs: IO port probe 0x0c00-0x0cff: clean. Oct 26 09:08:52 localhost kernel: cs: IO port probe 0x0a00-0x0aff: clean. Oct 26 09:10:03 localhost kernel: Unable to handle kernel NULL pointer dereference at virtual address 00000000 Oct 26 09:10:03 localhost kernel: c025287b Oct 26 09:10:03 localhost kernel: *pde = 00000000 Oct 26 09:10:03 localhost kernel: Oops: 0000 [#1] Oct 26 09:10:03 localhost kernel: CPU: 0 Oct 26 09:10:03 localhost kernel: EIP: 0060:[scsi_device_cancel+57/257] Not tainted VLI Oct 26 09:10:03 localhost kernel: EFLAGS: 00010013 (2.6.9-rc4mm1) Oct 26 09:10:03 localhost kernel: eax: 00000001 ebx: fffffff0 ecx: 00000001 edx: 00000000 Oct 26 09:10:03 localhost kernel: esi: cb794a80 edi: c13d1e5c ebp: 00000282 esp: c13d1e58 Oct 26 09:10:03 localhost kernel: ds: 007b es: 007b ss: 0068 Oct 26 09:10:03 localhost kernel: Stack: 00000000 c13d1e5c c13d1e5c cb794c04 cdcb78b4 c03ed008 c0252982 c023414f Oct 26 09:10:03 localhost kernel: c13d1e90 cdcb7800 d048cea0 cbae60c0 cf4641c0 c02529b3 00000000 cb0f8054 Oct 26 09:10:03 localhost kernel: c0159d5c cdd45da8 cb794c04 cdd45d84 cdd45d84 cb794c04 c02340fb cdd45c00 Oct 26 09:10:03 localhost kernel: Call Trace: Warning (Oops_read): Code line not seen, dumping what data is available
ebx; fffffff0 <__kernel_rt_sigreturn+1bb0/????> esi; cb794a80 <pg0+b2ffa80/3fb69400> edi; c13d1e5c <pg0+f3ce5c/3fb69400> esp; c13d1e58 <pg0+f3ce58/3fb69400>
Oct 26 09:10:03 localhost kernel: Code: 14 24 89 c7 ba 03 00 00 00 89 44 24 04 89 44 24 08 89 f0 e8 b2 41 00 00 9c 5d fa b8 01 00 00 00 e8 b6 1c ec ff 8b 56 1c 8d 5a f0 <8b> 43 10 0f 18 00 90 8d 46 1c 39 c2 74 40 8b 83 b8 00 00 00 85 Using defaults from ksymoops -t elf32-i386 -a i386
Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????> 00000000 <_EIP>: Code; ffffffd5 <__kernel_rt_sigreturn+1b95/????> 0: 14 24 adc $0x24,%al Code; ffffffd7 <__kernel_rt_sigreturn+1b97/????> 2: 89 c7 mov %eax,%edi Code; ffffffd9 <__kernel_rt_sigreturn+1b99/????> 4: ba 03 00 00 00 mov $0x3,%edx Code; ffffffde <__kernel_rt_sigreturn+1b9e/????> 9: 89 44 24 04 mov %eax,0x4(%esp) Code; ffffffe2 <__kernel_rt_sigreturn+1ba2/????> d: 89 44 24 08 mov %eax,0x8(%esp) Code; ffffffe6 <__kernel_rt_sigreturn+1ba6/????> 11: 89 f0 mov %esi,%eax Code; ffffffe8 <__kernel_rt_sigreturn+1ba8/????> 13: e8 b2 41 00 00 call 41ca <_EIP+0x41ca> Code; ffffffed <__kernel_rt_sigreturn+1bad/????> 18: 9c pushf Code; ffffffee <__kernel_rt_sigreturn+1bae/????> 19: 5d pop %ebp Code; ffffffef <__kernel_rt_sigreturn+1baf/????> 1a: fa cli Code; fffffff0 <__kernel_rt_sigreturn+1bb0/????> 1b: b8 01 00 00 00 mov $0x1,%eax Code; fffffff5 <__kernel_rt_sigreturn+1bb5/????> 20: e8 b6 1c ec ff call ffec1cdb <_EIP+0xffec1cdb> Code; fffffffa <__kernel_rt_sigreturn+1bba/????> 25: 8b 56 1c mov 0x1c(%esi),%edx Code; fffffffd <__kernel_rt_sigreturn+1bbd/????> 28: 8d 5a f0 lea 0xfffffff0(%edx),%ebx Code; 00000000 Before first symbol 2b: 8b 43 10 mov 0x10(%ebx),%eax Code; 00000003 Before first symbol 2e: 0f 18 00 prefetchnta (%eax) Code; 00000006 Before first symbol 31: 90 nop Code; 00000007 Before first symbol 32: 8d 46 1c lea 0x1c(%esi),%eax Code; 0000000a Before first symbol 35: 39 c2 cmp %eax,%edx Code; 0000000c Before first symbol 37: 74 40 je 79 <_EIP+0x79> Code; 0000000e Before first symbol 39: 8b 83 b8 00 00 00 mov 0xb8(%ebx),%eax Code; 00000014 Before first symbol 3f: 85 .byte 0x85
2 warnings and 1 error issued. Results may not be reliable. ---------------------------- END OF DECODED OOPS ------------------------------------
Alan Stern
-mat
------------------------------------------------------- This SF.Net email is sponsored by: Sybase ASE Linux Express Edition - download now for FREE LinuxWorld Reader's Choice Award Winner for best database on Linux. http://ads.osdn.com/?ad_id=5588&alloc_id=12065&op=click _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
