Hi!
> > > with 2.6.10 (i386/UP/UHCI)
> > > 0000:00:1d.0 USB Controller: Intel Corp. 82801DB USB (Hub #1) (rev 03)
> > > 0000:00:1d.1 USB Controller: Intel Corp. 82801DB USB (Hub #2) (rev 03)
> > > 0000:00:1d.2 USB Controller: Intel Corp. 82801DB USB (Hub #3) (rev 03)
> > > 0000:00:1d.7 USB Controller: Intel Corp. 82801DB USB2 (rev 03)
> > >
> > > my mouse will not work after resumption. Replugging will fix it.
> >
> > There's known problem with APIC not being initialized properly. Can
> > you try pci=routeirq, and noapic if that fails.
>
> I've tried pci=routeirq. It makes no difference.
> During boot the kernel does recognise the device and assigns it address 2.
>
> How could an irq routing problem explain it? I don't unload the modules
> as I am using a static kernel.
Okay, it is probably different problem (and looks like usb
problem). It worked ok in 2.6.9, right?
[Well, I always had to replug my usb-bluetooth dongle....
Pavel
--
People were complaining that M$ turns users into beta-testers...
...jr ghea gurz vagb qrirybcref, naq gurl frrz gb yvxr vg gung jnl!
-------------------------------------------------------
The SF.Net email is sponsored by: Beat the post-holiday blues
Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek.
It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
