Am 2005-01-04 22:24 +0200 schrieb Olav Kongas: > enabled. Therefore, soon after umplugging you shouldn't see > interrupts as all the submitted urbs should be dequeued.
Ok. I really didn't know for sure. Good point. > These printouts look ok. For me too. No really weird things to see. But these "irq65: nobody cared" I see the first time on my system and I implemented much hardware stuff on it. Thats weird (for me). > Still, could you post isp116x chip's register dumps obtained > just after chip initialization for both Lothar's and my > driver. In my one, you should get it if you uncomment the I will do that probably some later this day. At first I am going to implement a small software Reset Routine between the /* */ in my platform setup. I hope a software Reset is as good as a Hardware Reset there. Or should I solder a Gate to the reset pin fir debugging purposes? Lets see... Konsti -- GPG KeyID EF62FCEF Fingerprint: 13C9 B16B 9844 EC15 CC2E A080 1E69 3FDA EF62 FCEF ------------------------------------------------------- The SF.Net email is sponsored by: Beat the post-holiday blues Get a FREE limited edition SourceForge.net t-shirt from ThinkGeek. It's fun and FREE -- well, almost....http://www.thinkgeek.com/sfshirt _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
