Hi Samuel, > When issuing a command which I knew produced the errors, I got the surprise > to see that no usb reset happened when the transfers were made through the > hub. I tested it several times, enough so that in the previous > configuration it would have made at least an error, and nothing.
as you might have seen on this list (subject: "usb-storage: speed inconsistent, disconnect, oops") I have problems with my usb frame too. I get a lot of usb resets during the transfer and a disconnect after some time. Alan was so kind to point me to the patch you used (and some more). But that didn't help. So I was very excited about your findings and put a hub between the drive and the usb card. But it didn't work for me. I still get resets and a disconnect after some time. What chipset does your usb-ide converter use? My usb frame uses a chip from cypress, but I tried another one from genesys and that got the problems too. Kind regards, Gerd ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
