Hi, I'm facing one problem with USB interface, I'm using USB modem and trying to initialize modem with few AT commands, one among them is AT*EALR=3,1 and response for this is "EALV: 3,1,3". Problem with this command is response continuous and it is blocking the device communication, I mean response is very fast and it's blocking all communication for the device. Same thing we tried with the serial communication, its working fine. Where as with USB driver it's continuous, even the same in windows too.
I hope you understand this problem. Could please tell us what to do for this problem? Regards Shalini -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Wojciech Kromer Sent: Tuesday, April 12, 2005 7:07 PM To: linux-usb-devel@lists.sourceforge.net Subject: Re: [linux-usb-devel] Original drivers for ISP1362 by Philips By the way, and same quesion agin: Have anyone ported original philps drivers to 2.6.x kernel ? ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_id=6595&alloc_id=14396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel ------------------------------------------------------- SF email is sponsored by - The IT Product Guide Read honest & candid reviews on hundreds of IT Products from real users. Discover which products truly live up to the hype. Start reading now. http://ads.osdn.com/?ad_ide95&alloc_id396&op=click _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
