Hi:
I use linux-2.4.18 with pl2303 usb converter supported. I connect the USB
Serial converter with DCE Device (like modem).
When I type stty -F /dev/usb/tts/0 and display the device baudrate / termio
setting.
But , When I connect to one 4-port prolific HUB, and connect to the Host
controller(OHCI). I reset board, and type stty -F /dev/usb/tts/0,
It work fine and report baudrate/termio etc. When I type stty-F
/dev/usb/tts/0 again, I get the OHCI/ interrupt error,"Schedule overrun".
And can not stop system.
Any suggestion ???
grant kang
.
-------------------------------------------------------
SF.Net email is sponsored by: Tell us your software development plans!
Take this survey and enter to win a one-year sub to SourceForge.net
Plus IDC's 2005 look-ahead and a copy of this survey
Click here to start! http://www.idcswdc.com/cgi-bin/survey?id=105hix
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
