Hi,
Our kernel can support usb disk very well. But
when my pc camera is attached, it can just run for a
while, then no interrupt will be triggered by the hc
following the uhci standard. In this case, the ACTIVE
bit of the td status has been cleared by the hc, and
the IOC bit equals to 1, the ACTUAL LENGTH of td
equals to 0x7FF. And all the value of register of hc
is ok, except that value of the STATUS register equal
to 0. I don't know what happened at that time. My pc
camera with the module can work well on pc.
Would you please give some sugession on how to go
on with the damn camera?
Regards,
Leo
_________________________________________________________
Do You Yahoo!?
150万曲MP3疯狂搜，带您闯入音乐殿堂
http://cn.rd.yahoo.com/mail_cn/tag/yisou/music/*http://music.yisou.com/
美女明星应有尽有，搜遍美图、艳图和酷图
http://cn.rd.yahoo.com/mail_cn/tag/yisou/image/*http://image.yisou.com
1G就是1000兆，雅虎电邮自助扩容！
http://cn.rd.yahoo.com/mail_cn/tag/1g/*http://cn.mail.yahoo.com/event/mail_1g/
-------------------------------------------------------
This SF.Net email is sponsored by Oracle Space Sweepstakes
Want to be the first software developer in space?
Enter now for the Oracle Space Sweepstakes!
http://ads.osdn.com/?ad_id=7393&alloc_id=16281&op=click
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
