Hi!

I have a USB2.0 hub with three low speed devices attached to it.
The hub, however, is connected to the PC with a cable too long for USB2.0, so the usb connect fails with -71. Would it be possible to retry with USB1.1 when -71 received?

If not, what'd be the best way for me around this, other than deleting ehci_hcd.ko?


dmesg with ehci_hcd loaded, erroring:

usb 1-1: new high speed USB device using ehci_hcd and address 2
usb 1-1: device descriptor read/all, error -71
usb 1-1: new high speed USB device using ehci_hcd and address 3
usb 1-1: device descriptor read/all, error -71
usb 1-1: new high speed USB device using ehci_hcd and address 4
usb 1-1: device descriptor read/8, error -71
usb 1-1: device descriptor read/8, error -71
usb 1-1: new high speed USB device using ehci_hcd and address 5
usb 1-1: device descriptor read/8, error -71
usb 1-1: device descriptor read/8, error -71


and without:

usb 2-1: new full speed USB device using ohci_hcd and address 7
hub 2-1:1.0: USB hub found
hub 2-1:1.0: 4 ports detected
usb 2-1.1: new low speed USB device using ohci_hcd and address 8
input: USB HID v1.10 Keyboard [1267:0103] on usb-0000:00:02.0-1.1
input: USB HID v1.10 Device [1267:0103] on usb-0000:00:02.0-1.1
usb 2-1.3: new low speed USB device using ohci_hcd and address 9
input: USB HID v1.10 Joystick [Zeroplus PS Vibration Feedback Converter ] on usb-0000:00:02.0-1.3
usb 2-1.4: new low speed USB device using ohci_hcd and address 10
input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:02.0-1.4


--
Anssi Hannula



-------------------------------------------------------
SF.Net email is sponsored by: Discover Easy Linux Migration Strategies
from IBM. Find simple to follow Roadmaps, straightforward articles,
informative Webcasts and more! Get everything you need to get up to
speed, fast. http://ads.osdn.com/?ad_id=7477&alloc_id=16492&op=click
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to