>On Friday 11 November 2005 14:33, Oliver Neukum wrote: > > I can sort of replicate it, but I get a different error. > Please recompile the driver with MTS_DO_DEBUG defined and try again. > > Regards > Oliver >
Enabled MTS_DO_DEBUG in microtek.c . Quite a lot of info: (Kern.log after plugging in scanner) Nov 11 15:03:18 decibels hub 1-0:1.0: state 5 ports 8 chg 0000 evt 0004 Nov 11 15:03:18 decibels ehci_hcd 0000:00:02.2: GetStatus port 2 status 001002 POWER sig=se0 CSC Nov 11 15:03:18 decibels hub 1-0:1.0: port 2, status 0100, change 0001, 12 Mb/s Nov 11 15:03:18 decibels hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 Nov 11 15:03:18 decibels hub 1-0:1.0: state 5 ports 8 chg 0000 evt 0004 Nov 11 15:03:18 decibels ehci_hcd 0000:00:02.2: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT Nov 11 15:03:18 decibels hub 1-0:1.0: port 2, status 0501, change 0001, 480 Mb/s Nov 11 15:03:18 decibels hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 Nov 11 15:03:18 decibels ehci_hcd 0000:00:02.2: port 2 full speed --> companion Nov 11 15:03:18 decibels ehci_hcd 0000:00:02.2: GetStatus port 2 status 003001 POWER OWNER sig=se0 CONNECT Nov 11 15:03:19 decibels hub 2-0:1.0: state 5 ports 4 chg 0000 evt 0004 Nov 11 15:03:19 decibels ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS Nov 11 15:03:19 decibels hub 2-0:1.0: port 2, status 0101, change 0001, 12 Mb/s Nov 11 15:03:19 decibels hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 Nov 11 15:03:19 decibels ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS Nov 11 15:03:19 decibels usb 2-2: new full speed USB device using ohci_hcd and address 3 Nov 11 15:03:19 decibels ohci_hcd 0000:00:02.0: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS Nov 11 15:03:19 decibels usb 2-2: new device strings: Mfr=0, Product=0, SerialNumber=0 Nov 11 15:03:19 decibels DEV: registering device: ID = '2-2' Nov 11 15:03:19 decibels usb 2-2: hotplug Nov 11 15:03:19 decibels PM: Adding info for usb:2-2 Nov 11 15:03:19 decibels bus usb: add device 2-2 Nov 11 15:03:19 decibels bound device '2-2' to driver 'usb' Nov 11 15:03:19 decibels usb 2-2: adding 2-2:1.0 (config #1, interface 0) Nov 11 15:03:19 decibels DEV: registering device: ID = '2-2:1.0' Nov 11 15:03:19 decibels usb 2-2:1.0: hotplug Nov 11 15:03:19 decibels PM: Adding info for usb:2-2:1.0 Nov 11 15:03:19 decibels bus usb: add device 2-2:1.0 Nov 11 15:03:19 decibels usb: Matched Device 2-2:1.0 with Driver microtekX6 Nov 11 15:03:19 decibels microtekX6 2-2:1.0: usb_probe_interface Nov 11 15:03:19 decibels microtekX6 2-2:1.0: usb_probe_interface - got id Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:714 (mts_usb_probe) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): usb-device descriptor at 3c4e1000 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): product id = 0xb6, vendor id = 0x5da Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:721 (mts_usb_probe) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:725 (mts_usb_probe) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): found model Scanmaker V6UPL Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): model Scanmaker V6UPL is not known to be fully supported, reports welcome! Nov 11 15:03:19 decibels scsi0 : microtekX6 Nov 11 15:03:19 decibels DEV: registering device: ID = 'host0' Nov 11 15:03:19 decibels PM: Adding info for No Bus:host0 Nov 11 15:03:19 decibels CLASS: registering class device: ID = 'host0' Nov 11 15:03:19 decibels class_hotplug - name = host0 Nov 11 15:03:19 decibels DEV: registering device: ID = 'target0:0:0' Nov 11 15:03:19 decibels PM: Adding info for No Bus:target0:0:0 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 9d 00 96 98 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0101 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:534 (mts_build_transfer_context) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Using scatter/gather Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfering from desc->ep_response == 2 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:455 (mts_command_done) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfer = 0x2e0dd200 context = 0x2d9f5390 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): status = 0x0 data-length = 0x24 sent = 0x6 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0301 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:376 (mts_int_submit_urb) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfer = 0x2e0dd200 context = 0x2d9f5390 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): status = 0x0 data-length = 0x24 sent = 0x6 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0301 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:496 (mts_do_sg) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfer = 0x2e0dd200 context = 0x2d9f5390 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): status = 0x0 data-length = 0x24 sent = 0x24 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Processing fragment 0 of 1 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:376 (mts_int_submit_urb) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfer = 0x2e0dd200 context = 0x2d9f5390 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): status = 0x0 data-length = 0x24 sent = 0x24 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels ohci_hcd 0000:00:02.0: urb ffff81002e0dd200 path 2 ep2in 83160000 cc 8 --> status -75 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:496 (mts_do_sg) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfer = 0x2e0dd200 context = 0x2d9f5390 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): status = 0xffffffb5 data-length = 0x24 sent = 0x0 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Processing fragment 1 of 1 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:402 (mts_transfer_cleanup) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfer = 0x2e0dd200 context = 0x2d9f5390 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): status = 0xffffffb5 data-length = 0x24 sent = 0x0 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:376 (mts_int_submit_urb) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfer = 0x2e0dd200 context = 0x2d9f5390 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): status = 0xffffffb5 data-length = 0x24 sent = 0x0 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 9d 00 96 98 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:534 (mts_build_transfer_context) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Using scatter/gather Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfering from desc->ep_response == 2 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): error -22 submitting URB Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 9d 00 96 98 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:534 (mts_build_transfer_context) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Using scatter/gather Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): transfering from desc->ep_response == 2 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): error -22 submitting URB Nov 11 15:03:19 decibels PM: Removing info for No Bus:target0:0:0 Nov 11 15:03:19 decibels DEV: registering device: ID = 'target0:0:1' Nov 11 15:03:19 decibels PM: Adding info for No Bus:target0:0:1 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 b4 00 17 5a Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command to LUN=0 ID=1 CHANNEL=0 from SCSI layer Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): this device doesn't exist Nov 11 15:03:19 decibels PM: Removing info for No Bus:target0:0:1 Nov 11 15:03:19 decibels DEV: registering device: ID = 'target0:0:2' Nov 11 15:03:19 decibels PM: Adding info for No Bus:target0:0:2 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 4f 00 4b 51 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command to LUN=0 ID=2 CHANNEL=0 from SCSI layer Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): this device doesn't exist Nov 11 15:03:19 decibels PM: Removing info for No Bus:target0:0:2 Nov 11 15:03:19 decibels DEV: registering device: ID = 'target0:0:3' Nov 11 15:03:19 decibels PM: Adding info for No Bus:target0:0:3 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 00 00 00 00 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command to LUN=0 ID=3 CHANNEL=0 from SCSI layer Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): this device doesn't exist Nov 11 15:03:19 decibels PM: Removing info for No Bus:target0:0:3 Nov 11 15:03:19 decibels DEV: registering device: ID = 'target0:0:4' Nov 11 15:03:19 decibels PM: Adding info for No Bus:target0:0:4 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 10 00 00 00 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command to LUN=0 ID=4 CHANNEL=0 from SCSI layer Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): this device doesn't exist Nov 11 15:03:19 decibels PM: Removing info for No Bus:target0:0:4 Nov 11 15:03:19 decibels DEV: registering device: ID = 'target0:0:5' Nov 11 15:03:19 decibels PM: Adding info for No Bus:target0:0:5 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 00 00 00 00 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command to LUN=0 ID=5 CHANNEL=0 from SCSI layer Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): this device doesn't exist Nov 11 15:03:19 decibels PM: Removing info for No Bus:target0:0:5 Nov 11 15:03:19 decibels DEV: registering device: ID = 'target0:0:6' Nov 11 15:03:19 decibels PM: Adding info for No Bus:target0:0:6 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 00 00 00 00 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command to LUN=0 ID=6 CHANNEL=0 from SCSI layer Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): this device doesn't exist Nov 11 15:03:19 decibels PM: Removing info for No Bus:target0:0:6 Nov 11 15:03:19 decibels DEV: registering device: ID = 'target0:0:7' Nov 11 15:03:19 decibels PM: Adding info for No Bus:target0:0:7 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): got to drivers/usb/image/microtek.c:587 (mts_scsi_queuecommand) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command INQUIRY (6 bytes) Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): 12 00 00 00 24 00 cc aa aa 2a Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): desc at 0x2d9f5340: toggle = 0305 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): ep_out=c0008300 ep_response=c0010380 ep_image=c0018380 Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): Command to LUN=0 ID=7 CHANNEL=0 from SCSI layer Nov 11 15:03:19 decibels microtek usb (rev 0.4.3): this device doesn't exist Nov 11 15:03:19 decibels PM: Removing info for No Bus:target0:0:7 Nov 11 15:03:19 decibels bound device '2-2:1.0' to driver 'microtekX6' Nov 11 15:03:19 decibels usb: Bound Device 2-2:1.0 to Driver microtekX6 Nov 11 15:03:19 decibels CLASS: registering class device: ID = 'usbdev2.3' Nov 11 15:03:19 decibels class_hotplug - name = usbdev2.3 Nov 11 15:03:19 decibels hub 2-0:1.0: state 5 ports 4 chg 0000 evt 0004 ------------------------------------------------------- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42" plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
