This patch adds a second linksys vendor-id (077b) and the product id of the
pegasus based adapter USBVPN1
http://www1.linksys.com/Products/product.asp?prid=543&scid=30
Furthermore it replaces all LINKSYS_GPIO_RESET with DEFAULT_GPIO_RESET as both
are declared like this:
#define DEFAULT_GPIO_RESET 0x24
#define LINKSYS_GPIO_RESET 0x24
This is misleading and confusing.
The check is now done via the VENDOR_ID in pegasus.c:
if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS
Signed-off-by: Malte Doersam ([EMAIL PROTECTED])
--
Berlin bei -3°C
--- linux-2.6.15.1/drivers/usb/net/pegasus.c~ 2006-01-28 15:07:57.000000000 +0100
+++ linux-2.6.15.1/drivers/usb/net/pegasus.c 2006-01-28 16:27:29.000000000 +0100
@@ -521,6 +521,7 @@
ret = set_registers(pegasus, EthCtrl0, 3, data);
if (usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS ||
+ usb_dev_id[pegasus->dev_index].vendor == VENDOR_LINKSYS2 ||
usb_dev_id[pegasus->dev_index].vendor == VENDOR_DLINK) {
u16 auxmode;
read_mii_word(pegasus, 0, 0x1b, &auxmode);
--- linux-2.6.15.1/drivers/usb/net/pegasus.h.org 2006-01-28 16:27:45.000000000 +0100
+++ linux-2.6.15.1/drivers/usb/net/pegasus.h 2006-01-28 16:26:47.000000000 +0100
@@ -25,7 +25,6 @@
#define PHY_READ 0x40
#define PHY_WRITE 0x20
#define DEFAULT_GPIO_RESET 0x24
-#define LINKSYS_GPIO_RESET 0x24
#define DEFAULT_GPIO_SET 0x26
#define PEGASUS_PRESENT 0x00000001
@@ -140,6 +139,7 @@
#define VENDOR_KINGSTON 0x0951
#define VENDOR_LANEED 0x056e
#define VENDOR_LINKSYS 0x066b
+#define VENDOR_LINKSYS2 0x077b
#define VENDOR_MELCO 0x0411
#define VENDOR_MICROSOFT 0x045e
#define VENDOR_MOBILITY 0x1342
@@ -218,15 +218,15 @@
PEGASUS_DEV( "Corega FEter USB-TXS", VENDOR_COREGA, 0x000d,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4001,
- LINKSYS_GPIO_RESET )
+ DEFAULT_GPIO_RESET )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4002,
- LINKSYS_GPIO_RESET )
+ DEFAULT_GPIO_RESET )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x4102,
- LINKSYS_GPIO_RESET | PEGASUS_II )
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x400b,
- LINKSYS_GPIO_RESET | PEGASUS_II )
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX", VENDOR_DLINK, 0x200c,
- LINKSYS_GPIO_RESET | PEGASUS_II )
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "D-Link DSB-650TX(PNA)", VENDOR_DLINK, 0x4003,
DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "D-Link DSB-650", VENDOR_DLINK, 0xabc1,
@@ -260,17 +260,19 @@
PEGASUS_DEV( "LANEED USB Ethernet LD-USB/TX", VENDOR_LANEED, 0x200c,
DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x2202,
- LINKSYS_GPIO_RESET )
+ DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2203,
- LINKSYS_GPIO_RESET )
+ DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Linksys USB100TX", VENDOR_LINKSYS, 0x2204,
- LINKSYS_GPIO_RESET | HAS_HOME_PNA )
+ DEFAULT_GPIO_RESET | HAS_HOME_PNA )
PEGASUS_DEV( "Linksys USB10T Ethernet Adapter", VENDOR_LINKSYS, 0x2206,
- LINKSYS_GPIO_RESET | PEGASUS_II)
+ DEFAULT_GPIO_RESET | PEGASUS_II)
+PEGASUS_DEV( "Linksys USBVPN1", VENDOR_LINKSYS2, 0x08b4,
+ DEFAULT_GPIO_RESET )
PEGASUS_DEV( "Linksys USB USB100TX", VENDOR_LINKSYS, 0x400b,
- LINKSYS_GPIO_RESET | PEGASUS_II )
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "Linksys USB10TX", VENDOR_LINKSYS, 0x200c,
- LINKSYS_GPIO_RESET | PEGASUS_II )
+ DEFAULT_GPIO_RESET | PEGASUS_II )
PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0001,
DEFAULT_GPIO_RESET )
PEGASUS_DEV( "MELCO/BUFFALO LUA-TX", VENDOR_MELCO, 0x0005,
