Sorry for resending (from -users), but I think I found something
which should work actually. Please help.
Hallo, I need help with usb2-card-reader plugged into pcmcia-card
with usb2.0 (and ieee1394, see lspci-output at the end),
it gives (kernel 2.6.16, dmesg):
usb 5-1: reset high speed USB device using ehci_hcd and address 2
usb 5-1: reset high speed USB device using ehci_hcd and address 2
usb 5-1: reset high speed USB device using ehci_hcd and address 2
usb 5-1: reset high speed USB device using ehci_hcd and address 2
usb 5-1: reset high speed USB device using ehci_hcd and address 2
0:0:0:0: scsi: Device offlined - not ready after error recovery
usb-storage: device scan complete
usb2-card-reader works with ohci_hcd ("rmmod ehci_hcd" before) but
no high speed :-(
In another box (PCI-USB2.0) same usb2-card-reader works fine using
ehci_hcd.
Where to start solving that problem?
Norbert
00:03.0 CardBus bridge: O2 Micro, Inc. OZ6812 CardBus Controller (rev 05)
Subsystem: Uniwill Computer Corp: Unknown device 3000
Flags: bus master, stepping, slow devsel, latency 168, IRQ 10
Memory at 24000000 (32-bit, non-prefetchable) [size=4K]
Bus: primary=00, secondary=02, subordinate=05, sec-latency=176
Memory window 0: 20000000-21fff000 (prefetchable)
Memory window 1: 22000000-23fff000
I/O window 0: 00001000-000010ff
I/O window 1: 00001400-000014ff
Secondary status: SERR
16-bit legacy interface ports at 0001
02:00.0 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10
[OHCI])
Subsystem: ALi Corporation: Unknown device 5272
Flags: bus master, 66MHz, medium devsel, latency 16, IRQ 10
Memory at 22000000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
02:00.1 USB Controller: ALi Corporation USB 1.1 Controller (rev 03) (prog-if 10
[OHCI])
Subsystem: ALi Corporation: Unknown device 5272
Flags: bus master, 66MHz, medium devsel, latency 16, IRQ 10
Memory at 22001000 (32-bit, non-prefetchable) [size=4K]
Capabilities: [60] Power Management version 2
02:00.3 USB Controller: ALi Corporation USB 2.0 Controller (rev 01) (prog-if 20
[EHCI])
Subsystem: ALi Corporation: Unknown device 5272
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
Memory at 22002800 (32-bit, non-prefetchable) [size=256]
Capabilities: [50] Power Management version 2
Capabilities: [58] Debug port
02:00.4 FireWire (IEEE 1394): ALi Corporation M5253 P1394 OHCI 1.1 Controller
(prog-if 10 [OHCI])
Subsystem: ALi Corporation M5253 P1394 OHCI 1.1 Controller
Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 10
Memory at 22002000 (32-bit, non-prefetchable) [size=2K]
[virtual] Expansion ROM at 20000000 [disabled] [size=64K]
Capabilities: [80] Power Management version 2
----- End forwarded message -----
--
============================================
Norbert Schmidt
Manager ASIC
Silicann Technologies GmbH
Joachim-Jungius-Str. 9
18059 Rostock
Germany
Fon: +49 (0)381 4059-408
Mobile: +49 (0)172 30 71 221
Fax: +49 (0)381 4059-874
E-Mail: [EMAIL PROTECTED]
WWW: www.silicann.com
--------------------------------------------
Please visit us at: / Wir stellen aus:
SENSOR+TEST 2006, Nuremberg (Germany)
Hall: 4, Booth: 4-259
30. May - 01. June 2006
============================================
-------------------------------------------------------
This SF.Net email is sponsored by xPML, a groundbreaking scripting language
that extends applications into web and mobile media. Attend the live webcast
and join the prime developer group breaking into this new coding territory!
http://sel.as-us.falkag.net/sel?cmd=lnk&kid=110944&bid=241720&dat=121642
_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
