a regression Begin forwarded message:
Date: Sat, 17 Jun 2006 14:00:52 -0700 From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [Bugme-new] [Bug 6701] New: 4-in-1 reader's LED still shines after shutdown http://bugzilla.kernel.org/show_bug.cgi?id=6701 Summary: 4-in-1 reader's LED still shines after shutdown Kernel Version: 2.6.13 - 2.6.16 (vanilla) Status: NEW Severity: normal Owner: [EMAIL PROTECTED] Submitter: [EMAIL PROTECTED] Most recent kernel where this bug did not occur: 2.6.12 Distribution: Gentoo Hardware Environment: AMD Athlon XP, Abit NF7-S (nforce 2) motherboard, a no-name 4-in-1 card reader - lsusb -v gives: idVendor 0x07cc Carry Computer Eng., Co., Ltd idProduct 0x0360 iManufacturer 1 Ltd iProduct 2 Winter Ver1.3 bInterfaceClass 8 Mass Storage bInterfaceSubClass 6 SCSI bInterfaceProtocol 80 Bulk (Zip) iInterface 4 1.06.05.0331 Problem Description: The green LED (indicating something like power-on state of the reader, but it turns on at system startup and not during POST) at the front doesn't stop shining after shutdown, although it does on shutdown of linux 2.6.12 and older (about a second or two before complete poweroff) and windows. The motherboard doesn't allow to turn off the power of the onboard USB header, which the reader is connected to. I've tried to compile with usb and scsi stuff as modules, but still no effect. I've also tried the kororaa livecd, as far as I remember based on kernel version 2.6.13 or 2.6.14, and the effect was exactly the same. ------- You are receiving this mail because: ------- You are on the CC list for the bug, or are watching someone who is. _______________________________________________ [email protected] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
