yaregression

Begin forwarded message:

Date: Sun, 18 Jun 2006 05:09:41 -0700
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Bugme-new] [Bug 6708] New: ohci_hcd hangs on insertion of usb device


http://bugzilla.kernel.org/show_bug.cgi?id=6708

           Summary: ohci_hcd hangs on insertion of usb device
    Kernel Version: 2.6.16
            Status: NEW
          Severity: normal
             Owner: [EMAIL PROTECTED]
         Submitter: [EMAIL PROTECTED]


Most recent kernel where this bug did not occur:2.6.15 series
Distribution:Gentoo Linux
Hardware Environment:x86, athlon-xp, via-kt400
Software Environment:
Problem Description:
The troublemaker is an Trekstor iBeat Organix device. It used to work just fine
under the 2.6.15 kernel series but since 2.6.16 the ohci_hcd driver hangs on
insertion of the device. rmmod ohci_hcd and the device works just fine with
uhci_hcd. The funny thing is that the whole usb subsystem becomes unusable on
insertion of the device. lsusb hangs, tail /proc/usb/devices hangs, removing or
inserting any other usb device during the hang does not work either, ...
After removal of the Organix everything starts working just fine again.

dmesg output:

hub 1-0:1.0: state 7 ports 6 chg 0000 evt 0002
ehci_hcd 0000:00:10.3: GetStatus port 1 status 001803 POWER sig=j CSC CONNECT
hub 1-0:1.0: port 1, status 0501, change 0001, 480 Mb/s
hub 1-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x501
ehci_hcd 0000:00:10.3: port 1 high speed
ehci_hcd 0000:00:10.3: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: new high speed USB device using ehci_hcd and address 5
ehci_hcd 0000:00:10.3: port 1 high speed
ehci_hcd 0000:00:10.3: GetStatus port 1 status 001005 POWER sig=se0 PE CONNECT
usb 1-1: default language 0x0409
usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=3
usb 1-1: Product: i.Beat organix
usb 1-1: Manufacturer: TrekStor
usb 1-1: SerialNumber: 0002F68172B2CC9D
usb 1-1: uevent
usb 1-1: device is bus-powered
usb 1-1: configuration #1 chosen from 1 choice
usb 1-1: hcd_unlink_urb f6de3860 fail -16


Steps to reproduce:
modprobe ohci_hcd
insert iBeat Organix device

------- You are receiving this mail because: -------
You are on the CC list for the bug, or are watching someone who is.


_______________________________________________
[email protected]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel

Reply via email to