Hi all, I have been dealing with the same error -110 for some time. Eventually i found out that the clock divider suppling the clock to the USB host controller (external Philips isp1161a) was not set up properly and hence the timeouts. I don't know how it works with an onboard usb controller but perhaps it is a good idea to check out for a similar issue.
Hope that helps... Good luck! --Danny David Brownell wrote: >> (2) I have the SOF packets occurring on the bus. Does this make sure that >> the DMA engine is working fine? >> > > No, but it does say the transciever is set up well enough to send packets. > > >> (3) If the SOF's are occurring on the bus then what could be the reason for >> the device descriptor request not being sent out on the bus? >> > > It's still possible there's some SOC-specific setup you need to do, > even if it's not related to the transceiver. > > > Using Tomcat but need to do more? Need to support web services, security? > Get stuff done quickly with pre-integrated technology to make your job easier > Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo > http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 > _______________________________________________ > linux-usb-devel@lists.sourceforge.net > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-devel > > Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnk&kid=120709&bid=263057&dat=121642 _______________________________________________ linux-usb-devel@lists.sourceforge.net To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
