>>>>> "Jon" == Jon Smirl <[EMAIL PROTECTED]> writes:
Jon> It looks like the driver is broken. I put the device into a Windows
Jon> laptop and it works fine.
Jon> Note that ifconfig doesn't say the interface is RUNNING.
Jon> It is UP and I gave it a static IP but it still isn't RUNNING.
Jon> eth1 Link encap:Ethernet HWaddr 00:60:6E:BF:25:89
Jon> inet addr:192.168.1.21 Bcast:192.168.1.255 Mask:255.255.255.0
Jon> UP BROADCAST MULTICAST MTU:1500 Metric:1
Jon> RX packets:73 errors:0 dropped:0 overruns:0 frame:0
Jon> TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
Jon> collisions:0 txqueuelen:1000
Jon> RX bytes:22225 (21.7 KiB) TX bytes:0 (0.0 b)
Jon> [ 8514.301520] eth1: register 'dm9601' at usb-0000:00:1d.0-2.4,
Jon> Davicom DM9601 USB Ethernet, 00:60:6e:bf:25:89
Jon> [ 8514.301562] PM: Adding info for No Bus:usbdev1.8
Jon> [ 8514.422082] eth1: link down
Jon> [ 8514.439600] ADDRCONF(NETDEV_UP): eth1: link is not ready
Odd, it doesn't seem to detect the link. Does it help to down and
re-up the interface?
Here it works:
% /sbin/ifconfig eth2
eth2 Link encap:Ethernet HWaddr 00:00:00:00:1C:16
inet addr:10.0.0.5 Bcast:10.255.255.255 Mask:255.0.0.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:390640 errors:0 dropped:0 overruns:0 frame:0
TX packets:580141 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:26031463 (24.8 MiB) TX bytes:638388028 (608.8 MiB)
--
Bye, Peter Korsgaard
-------------------------------------------------------------------------
This SF.net email is sponsored by DB2 Express
Download DB2 Express C - the FREE version of DB2 express and take
control of your XML. No limits. Just data. Click to get it now.
http://sourceforge.net/powerbar/db2/
_______________________________________________
linux-usb-devel@lists.sourceforge.net
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-devel
