Matt,
This patch helped a lot, but I'm still getting some erros. At least I'm
now able to mount and to burn CDs. Here are some questions I still
have:
- Why did I had this problem? I know of other people who have a 8230e but
they did not had to apply a patch. Is there maybe a difference between
the different writable CDs?
- Do I now have a 8230e or a 'CD-Writer+ 8290' drive as
'cdrecord -scanbus' and /etc/sysconfig/hwconf are saying?
- When I was burning a rewritable CD a 2nd time, I was getting some
IO errors. The CD looks ok though. Is this something I should pay
attention to??
Here are the cdrecord outputs when I burned a rewritable CD two times:
Burning the rewritable CD the 1st time which looks ok:
======================================================
alpha:root# cdrecord -v --eject dev=1,0,0 speed=4 fisher-i386-disc1.iso
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 8290 '
Revision : '1.3C'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1343488 = 1312 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 649 MB
Total size: 746 MB (73:54.96) = 332622 sectors
Lout start: 746 MB (73:56/72) = 332622 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11078 (97:34/22)
ATIP start of lead out: 336075 (74:43/00)
speed low: 0 speed high: 4
power mult factor: 3 5
recommended erase/write power: 3
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Blocks total: 336075 Blocks current: 336075 Blocks remaining: 3453
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 649 of 649 MB written (fifo 100%).
Track 01: Total bytes read/written: 681205760/681205760 (332620 sectors).
Writing time: 1115.675s
Fixating...
Fixating time: 60.992s
cdrecord: fifo had 10730 puts and 10730 gets.
cdrecord: fifo was 0 times empty and 10665 times full, min fill was 98%.
alpha:root#
Burning the rewritable CD a 2nd time which triggered some errors:
=================================================================
alpha:root# cdrecord -v --eject dev=1,0,0 speed=4 fisher-i386-disc1.iso
Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
TOC Type: 1 = CD-ROM
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.17
Using libscg version 'schily-0.1'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 8290 '
Revision : '1.3C'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1343488 = 1312 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 649 MB
Total size: 746 MB (73:54.96) = 332622 sectors
Lout start: 746 MB (73:56/72) = 332622 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 6
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11078 (97:34/22)
ATIP start of lead out: 336075 (74:43/00)
speed low: 0 speed high: 4
power mult factor: 3 5
recommended erase/write power: 3
A2 values: 5C C6 26
Disk type: Phase change
Manuf. index: 11
Manufacturer: Mitsubishi Chemical Corporation
Trying to clear drive status.
cdrecord: Drive needs to reload the media to return to proper status.
Blocks total: 1166730 Blocks current: 1166730 Blocks remaining: 834108
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 1 seconds.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 02: 649 of 649 MB written (fifo 100%).
Track 02: Total bytes read/written: 681205760/681205760 (332620 sectors).
Writing time: 1114.365s
Fixating...
cdrecord: Input/output error. close track/session: scsi sendcmd: retryable error
CDB: 5B 00 02 00 00 00 00 00 00 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 72 03 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x72 Qual 0x03 (session fixation error - incomplete track in session) Fru
0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.447s timeout 480s
Fixating time: 0.501s
cdrecord: Input/output error. mode select g1: scsi sendcmd: retryable error
CDB: 55 10 00 00 00 00 00 00 10 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 26 00 00 00
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x26 Qual 0x00 (invalid field in parameter list) Fru 0x0
Sense flags: Blk 0 (not valid)
cmd finished after 0.032s timeout 40s
cdrecord: fifo had 10730 puts and 10730 gets.
cdrecord: fifo was 0 times empty and 10665 times full, min fill was 98%.
alpha:root#
On Sun, 4 Mar 2001, Matthew Dharm wrote:
> Try the attached patch.
>
> Matt
>
> On Sun, Mar 04, 2001 at 03:41:08AM -0500, [EMAIL PROTECTED] wrote:
> >
> > I read the documentation several times but I have no luck. I recompiled
> > the kernel several times with different options etc.
> >
> > I just noticed the following: When I try to mount a Redhat CD from
> > /dev/scd1, it fails with the error message"
> > Mar 4 03:35:27 alpha kernel: sr1: unsupported sector size 1310976.
> > Mar 4 03:35:27 alpha kernel: isofs_read_super: bread failed, dev=0b:01,
>iso_blknum=205524048, block=205524048
> > Mar 4 03:35:27 alpha kernel: sr1: CDROM (ioctl) reports ILLEGAL REQUEST.
> >
> >
> > I guess I have the same problem like this guy; Check out:
> > http://lists.sourceforge.net/archives//linux-usb-users/2000-December/001428.html
> > and especially this one:
> > http://lists.sourceforge.net/archives//linux-usb-users/2000-December/001430.html
> >
> >
> > Should I return this burner? And note how it says 8290 instead of 8230e;
> > (on the box and on the drive it says 8230e). So is it really a 8230e??????
> >
> > alpha:root# cdrecord -scanbus
> > Cdrecord 1.9 (i686-pc-linux-gnu) Copyright (C) 1995-2000 Jörg Schilling
> > Linux sg driver version: 3.1.17
> > Using libscg version 'schily-0.1'
> > [SNIP[
> > scsibus1:
> > cdrecord: Warning: controller returns zero sized CD capabilities page.
> > cdrecord: Warning: controller returns wrong page 1A for CD capabilities
> > page (2A).
> > 1,0,0 100) 'HP ' 'CD-Writer+ 8290 ' '1.3C' Removable CD-ROM
> > 1,1,0 101) *
> > 1,2,0 102) *
> > 1,3,0 103) *
> > 1,4,0 104) *
> > 1,5,0 105) *
> > 1,6,0 106) *
> > 1,7,0 107) *
> > alpha:root#
> >
> > Thanks
> > Werner
> >
> >
> >
> >
> >
> > On Sat, 3 Mar 2001, Matthew Dharm wrote:
> >
> > > On Sat, Mar 03, 2001 at 09:56:42PM -0500, [EMAIL PROTECTED] wrote:
> > > > alpha:root# cdrecord -blank fast /dev/scd1
> > >
> > > Wrong syntax. Upgrade to cdrecord-1.10a4 or later and RTFM.
> > >
> > > Matt
> > >
> > >
>
>
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
