Hi,
I've been trying to get my LJ1200 working but with no luck so far.
I'm getting kernel: "printer.c: usblp0: device node registration failed"
when I load the 'printer' module.
Also when I try to pring a test page (either via cups or by cat-ing some
simple postscript file to /dev/usb/lp0) my machine locks-up.
I had these problem with kernel 2.2.3SMP (stock Mandrake 8.0) but the
problem persists with 2.2.4
Whenever I leave the printer turned on when booting I get kernel a
crash, sometimes with a kernel
stack trace.
Any help would be appreciated
Thanks
Kostas
My system is a dual P2-450 on an (apparently crap) Asus P2B-D
Motherboard
List of modules
NVdriver emu10k1 soundcore 3c59x mousedev usbmouse input printer
usb-uhci usbcore
nls_cp850 vfat fat nls_iso8859-1 sr_mod isofs md
Dump of /proc/bus/usb/devices
----------------------------------
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 93/900 us (10%), #Int= 1, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=d400
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 2 Spd=1.5 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=045e ProdID=0029 Rev= 1.08
S: Manufacturer=Microsoft
S: Product=Microsoft IntelliMouse� Optical
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=100mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=01 Prot=02 Driver=usb_mouse
E: Ad=81(I) Atr=03(Int.) MxPS= 4 Ivl= 10ms
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=02 Dev#= 3 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=03f0 ProdID=0317 Rev= 1.00
S: Manufacturer=HewLett Packard
S: Product=HP LaserJet 1200
S: SerialNumber=00CNBF071546
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 2mA
I: If#= 0 Alt= 0 #EPs= 3 Cls=07(print) Sub=01 Prot=03 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=82(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
I: If#= 0 Alt= 1 #EPs= 2 Cls=07(print) Sub=01 Prot=02 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
I: If#= 0 Alt= 2 #EPs= 1 Cls=07(print) Sub=01 Prot=01 Driver=usblp
E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
========================================
dump of lspci -v
----------------------------------------
00:00.0 Host bridge: Intel Corporation 440BX/ZX - 82443BX/ZX Host bridge
(rev 03)
Flags: bus master, medium devsel, latency 64
Memory at e0000000 (32-bit, prefetchable) [size=128M]
Capabilities: [a0] AGP version 1.0
00:01.0 PCI bridge: Intel Corporation 440BX/ZX - 82443BX/ZX AGP bridge
(rev 03) (prog-if 00 [Normal decode])
Flags: bus master, 66Mhz, medium devsel, latency 64
Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
Memory behind bridge: d6000000-d7dfffff
Prefetchable memory behind bridge: d7f00000-dfffffff
00:04.0 ISA bridge: Intel Corporation 82371AB PIIX4 ISA (rev 02)
Flags: bus master, medium devsel, latency 0
00:04.1 IDE interface: Intel Corporation 82371AB PIIX4 IDE (rev 01)
(prog-if 80 [Master])
Flags: bus master, medium devsel, latency 32
I/O ports at d800 [size=16]
00:04.2 USB Controller: Intel Corporation 82371AB PIIX4 USB (rev 01)
(prog-if 00 [UHCI])
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at d400 [size=32]
00:04.3 Bridge: Intel Corporation 82371AB PIIX4 ACPI (rev 02)
Flags: medium devsel, IRQ 9
00:09.0 Multimedia audio controller: Creative Labs SB Live! EMU10000
(rev 05)
Subsystem: Creative Labs CT4620 SBLive!
Flags: bus master, medium devsel, latency 32, IRQ 19
I/O ports at d000 [size=32]
Capabilities: [dc] Power Management version 1
00:09.1 Input device controller: Creative Labs SB Live! (rev 05)
Subsystem: Creative Labs Gameport Joystick
Flags: bus master, medium devsel, latency 32
I/O ports at b800 [size=8]
Capabilities: [dc] Power Management version 1
00:0a.0 Multimedia controller: Sigma Designs, Inc. REALmagic Hollywood
Plus DVD Decoder (rev 02)
Flags: bus master, medium devsel, latency 32, IRQ 18
Memory at d5800000 (32-bit, non-prefetchable) [size=1M]
Capabilities: [40] Power Management version 1
00:0b.0 SCSI storage controller: Adaptec AIC-7881U (rev 01)
Subsystem: Adaptec AHA-2940UW SCSI Host Adapter
Flags: bus master, medium devsel, latency 32, IRQ 17
I/O ports at b400 [disabled] [size=256]
Memory at d5000000 (32-bit, non-prefetchable) [size=4K]
Expansion ROM at <unassigned> [disabled] [size=64K]
Capabilities: [dc] Power Management version 1
00:0c.0 Ethernet controller: 3Com Corporation 3c905B 100BaseTX [Cyclone]
(rev 64)
Subsystem: 3Com Corporation 3C905B Fast Etherlink XL 10/100
Flags: bus master, medium devsel, latency 32, IRQ 16
I/O ports at b000 [size=128]
Memory at d4800000 (32-bit, non-prefetchable) [size=128]
Expansion ROM at <unassigned> [disabled] [size=128K]
Capabilities: [dc] Power Management version 1
01:00.0 VGA compatible controller: nVidia Corporation NV15 (Geforce2
GTS) (rev a4) (prog-if 00 [VGA])
Subsystem: Guillemot Corporation: Unknown device 7006
Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 16
Memory at d6000000 (32-bit, non-prefetchable) [size=16M]
Memory at d8000000 (32-bit, prefetchable) [size=128M]
Expansion ROM at d7ff0000 [disabled] [size=64K]
Capabilities: [60] Power Management version 1
Capabilities: [44] AGP version 2.0
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
