Hi Neil,
That's a good question as I have the same camera with RHL6.2 and
kernel 2.4.4 and sometimes it works and others it reports /dev/sda1
having the wrong major minor number when I try to mount. I also
get a bad error message when I do the following (do you get it as well?):
Procedure:
- boot with the camera on
- mount the camera
- unmount the camera
- disconnect the USB cable while the laptop is still on
What do you see?
My guess is that one needs to update some modutils package and
some other usb packages for 2.4.x to work correctly.
Is this true?
Please let me know whether you get an error message when you go
through the above procedure (in case the camera was mounted successully).
Thanks!
Neil Z.
On Fri, 25 May 2001, Neil R. Goldberg wrote:
> Hello all:
>
> I have been trying to get my Fuji Finepix digital camera to work in the
> stock 2.4.3 and 2.4.4 kernels. However, even when I add an entry to the
> unusual_dev array (0x4cb, 0x100, 0x0, 0x2210, "Fuji", "Finepix 1400",
> US_8070, US_SC_CBI, NULL, 0)
>
> It will come back with the error message: USB device cannot assign
> device ID #. Where # increments each time it trys to add it.
>
> Interestingly enough, the 2.4.3mdk kernel that's in Mandrake 8.0 works
> fine; that's where I got the unusual_dev array parameters. But something
> else is keeping it from working. What did they add?
>
> Neil
>
>
> _______________________________________________
> [EMAIL PROTECTED]
> To unsubscribe, use the last form field at:
> http://lists.sourceforge.net/lists/listinfo/linux-usb-users
>
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users
