>  
>  > reads fine. Write relatively small amounts fine. On larger writes (few
>  > hundred MB?), freezes the system with no messages.
>  
>  Nothing in the log either? No oops, nothing? How long did you wait before
>  rebooting?

just tried copying a 32MB file. The shell froze on the following read
(guess failed on writing cached write). No messages at all, console or
log. All subsequent attempts to access the device hang: no
messages. Drive light off. Waited 1/2 hour or so.

Hard reset. let System come up. Then try to fsck usb-disk: part way
through, this device hangs. Drive light on. No messages. top shows
fsck.ext2 in ``D' state with no CPU use. Wait 20 min (after getting
into this state). Give up for the night.

>  
>  Do you have any other device you can try writing this much data to at this
>  rate? (To try to pinpoint the error.)

My only other USB device is a scanner- I can't write too much to it.

% cat /proc/bus/usb/devices
T:  Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#=  1 Spd=12  MxCh= 2
B:  Alloc=  0/900 us ( 0%), #Int=  0, #Iso=  0
D:  Ver= 1.10 Cls=09(hub  ) Sub=00 Prot=00 MxPS= 8 #Cfgs=  1
P:  Vendor=0000 ProdID=0000 Rev= 0.00
S:  Product=USB OHCI Root Hub
S:  SerialNumber=c8887000
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr=  0mA
I:  If#= 0 Alt= 0 #EPs= 1 Cls=09(hub  ) Sub=00 Prot=00 Driver=hub
E:  Ad=81(I) Atr=03(Int.) MxPS=   2 Ivl=255ms
T:  Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#=  2 Spd=12  MxCh= 0
D:  Ver= 1.10 Cls=ff(vend.) Sub=00 Prot=ff MxPS=64 #Cfgs=  1
P:  Vendor=05ab ProdID=0031 Rev= 1.00
S:  Manufacturer=In-System Design
S:  Product=USB Storage Adapter
S:  SerialNumber=98A421CF7EC687CD
C:* #Ifs= 1 Cfg#= 1 Atr=e0 MxPwr= 98mA
I:  If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=00 Prot=ff Driver=usb-storage
E:  Ad=01(O) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=82(I) Atr=02(Bulk) MxPS=  64 Ivl=  0ms
E:  Ad=83(I) Atr=03(Int.) MxPS=   2 Ivl= 32ms

The only messages in the log are from module insertion of hub,
usb-storage and scsi load stuff- nothing between loading and the hang.

Suggestions for debug flags to enable?

thanks,
Charles

-- 
Charles Schwieters     email: [EMAIL PROTECTED]
                       www:   http://schwieters.org/cds
phone: (301) 402-4914  FAX:   (301) 402-2867

_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
http://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to