Hello All,

I have been banging my head against the wall trying to get a orb drive to 
connect up to a Toshiba tecra 8000.  I have Mandrake 8.1 installed on a 
partition on the internal hd.

The various pieces appear to be working, but I get "Oct 25 22:53:07 localhost
/etc/hotplug/usb.agent: ... no drivers for USB product 4e6/2/100" when I
plug in the orb. Using LSMOD, I see that the modules usb-uhci,
usb-storage, usbcore, and scsi-mod are all loaded. If I cat /proc/scsi, it
correctly display the orb drive. But has it connected to scsi:0,
channel:00, id:00, Lun:00. But if I go to /dev/scsi/host0/bus0/target0/lun0, 
it is empty instead of having the expected part5. I am positive that it 
worked soon after installing at least a couple of times, but was flaky (irq 
problem perhaps?). Since then, after much pain, I have sound working, but no 
luck with the USB drive. 

USBViewer shows USB UHCI Root Hub with a ? underneath.  I believe the numbers 
in the log (4e6/2/100) actually are for the eUSCSI SCSI Bridge on the 
motherboard.

When I plug in the drive, the following messages show up in the log:

Oct 26 00:10:26 localhost kernel: hub.c: USB new device connect on bus1/1, 
assigned device number 4
Oct 26 00:10:26 localhost kernel: usb-uhci.c: interrupt, status 3, frame# 42
Oct 26 00:10:26 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 403
Oct 26 00:10:26 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 406
Oct 26 00:10:27 localhost kernel: usb-uhci.c: interrupt, status 2, frame# 476
Oct 26 00:10:27 localhost /etc/hotplug/usb.agent: ... no drivers for USB 
product 4e6/2/100

Sometimes the interrupt status messages go on for a long time.

The drive works under Win2000, so I don't think the drive has died.

Anyone have any ideas as to what else I can look at?  It appears to be so 
close.  The drive is recognized and registed in the system.  But the links 
for /dev/sda5 don't appear.  Any help would be appreciated.

Thanks for your time,

-Chris

_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to