On Tuesday 20 November 2001 01:50, Brad Hards wrote: > Adam Schrotenboer wrote: > > My APC UPS has a usb interface (actually the dev side is a RJ45), and IDs > > itself as a HID class dev. Unfortunately, there is no devfs entry in > > /dev/usb/hid (actually I tried creating the devs, but that didn't work > > either) > > I don't use devfs, but the device nodes should be created OK - there is > certainly code to create the entries. Is the hid driver claiming the device > in /proc/bus/usb/devices? Yes
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 4 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.10 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB OHCI Root Hub S: SerialNumber=d49d9000 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 2 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 7 Spd=1.5 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=051d ProdID=0002 Rev= 1.00 S: Manufacturer=American Power Conversion S: Product=Back-UPS Office 500 FW: 4.1.D USB FW: d1 S: SerialNumber=BB0124017290 C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr= 30mA I: If#= 0 Alt= 0 #EPs= 1 Cls=03(HID ) Sub=00 Prot=00 Driver=hid E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl= 10ms <FreecomUSB<->ATAPI entry snipped> > > > I'm trying to use the 3.9.4 APCUPSD code. and kernel 2.4.15-pre4 > > Interesting. I didn't know that apcupsd had USB support until I just > checked. The only monitoring software I knew of that works is NUT, and it > is experimental. There is some weird behaviour in the APC reports (like > centivolts instead of volts)... Well, I tried PowerChute 1st, next apcupsd, never heard of NUT > > Brad _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
