Hi everyone,
I've got a little problem with my USB digital camera (Olympus C2100UZ). When I plug it in to my PPC, the console tells me that it doesn't recognise it, which is fine. Then I start ghoto2 to download the pictures and the machine locks up, requiring a reset. This happens everytime, without fail. An error is displayed upon locking up; Machine check in kernel mode. Caused by (from SRR1=41030): Transfer error ack signal Can anyone enlighten me as to what this might mean? :) And perhaps where to start at fixing it? I'm running a fresh install of YDL2.1, with kernel 2.4.10-12a, ghoto2.0-beta3 and libusb-0.1.4. The last entries in /var/log/messages before I hit the reset button aren't very useful, but I'll include them just incase; Dec 18 11:26:30 cube kernel: hub.c: USB new device connect on bus2/1/4, assigned device number 4 Dec 18 11:26:30 cube kernel: usb.c: USB device 4 (vend/prod 0x7b4/0x100) is not claimed by any active driver. Dec 18 11:26:30 cube /etc/hotplug/usb.agent: ... no drivers for USB product 7b4/100/100 Thanks, Tim _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
