in /proc/scsi/scsi
The drive is a 60 GB Maxtor in case using a Genesys Logic usb controller.
in /proc/bus/usb/devices
T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 2 Spd=12 MxCh= 0
D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=05e3 ProdID=0702 Rev= 1.13
S: Product=USB Storage Device
C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 96mA
I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage
E: Ad=81(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms
in /proc/scsi/usb-stroage-0/0
Host scsi0: usb-storage
Vendor: Unknown
Product: USB Storage Device
Serial Number: None
Protocol: Transparent SCSI
Transport: Bulk
GUID: 05e307020000000000000000
Attached: 1
in /proc/scsi/scsi
Attached devices: none
no log message given for scsi0
running RH 7.2, kernel 2.4.9-7, modules usbcore, usb-uhci (tried uhci
too), usb-storage, scsi_mod, sd_mod, sg
If you need additional info please let me know, I apologize if it is in
TFM. If it is where?
Thanks,
Rich
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
