Hello. I have no idea if this has been asked, as I haven't searched the
archives yet (flame-retardant suit is properly donned). However, I am
using a laptop (Micron Transport Trek II, P2-300mhz) and a device
containing a Prolific Technologies PL-2303 chip (properly supported in the
generic USB-serial driver). I keep getting this output in dmesg:
usb.c: unhandled interfaces on device
usb.c: USB device 2 (vend/prod 0x67b/0x2303) is not claimed by any active
driver.
Length = 18
DescriptorType = 01
USB version = 1.10
Vendor:Product = 067b:2303
MaxPacketSize0 = 8
NumConfigurations = 1
Device version = 2.00
Device Class:SubClass:Protocol = 00:00:00
Per-interface classes
Configuration:
bLength = 9
bDescriptorType = 02
wTotalLength = 0027
bNumInterfaces = 01
bConfigurationValue = 01
iConfiguration = 00
bmAttributes = a0
MaxPower = 500mA
My devices are created correctly:
crw-r--r-- 1 root root 188, 0 Dec 29 13:24 /dev/usb/ttyUSB0
crw-r--r-- 1 root root 188, 1 Dec 29 13:24 /dev/usb/ttyUSB1
crw-r--r-- 1 root root 188, 2 Dec 29 13:25 /dev/usb/ttyUSB2
crw-r--r-- 1 root root 188, 3 Dec 29 13:25 /dev/usb/ttyUSB3
crw-r--r-- 1 root root 188, 4 Dec 29 13:25 /dev/usb/ttyUSB4
crw-r--r-- 1 root root 188, 5 Dec 29 13:25 /dev/usb/ttyUSB5
Any help would be appreciated.
--
Eric N. Valor
[EMAIL PROTECTED]
- This Space Intentionally Left Blank -
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
