hi, im having an irq routing conflict problem below is the output from dmesg i have an aopen ak73 motherboard with 256 mb ram, duron 900, a realtek network card, a quantum 20gb hd, and a fujitsu 6gb hd, 4x4x24 cdburner, 16x dvd rom, nvidia tnt2 videocard, 17" huyndai monitor, iomega 100mb parallel port zip drive, creative vibra sound card, intelimouse compatible mouse, standard keyboard ih using redhat 7.2 and have tried all the redhat standard kernels and the rahide 2.4.17 and i have built my own 2.4.18 kernel from the redhat .config file. all to no avail. is there someway i can specify that my usb root hubs have irq 9?
regards Dennis usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-uhci.c: $Revision: 1.275 $ time 07:50:14 Feb 18 2002 usb-uhci.c: High bandwidth mode enabled PCI: Found IRQ 9 for device 00:07.2 IRQ routing conflict for 00:07.2, have irq 11, want irq 9 IRQ routing conflict for 00:07.3, have irq 11, want irq 9 usb-uhci.c: USB UHCI at I/O 0xd400, IRQ 11 usb-uhci.c: Detected 2 ports usb.c: new USB bus registered, assigned bus number 1 hub.c: USB hub found hub.c: 2 ports detected PCI: Found IRQ 9 for device 00:07.3 IRQ routing conflict for 00:07.2, have irq 11, want irq 9 IRQ routing conflict for 00:07.3, have irq 11, want irq 9 usb-uhci.c: USB UHCI at I/O 0xd800, IRQ 11 usb-uhci.c: Detected 2 ports hub.c: USB new device connect on bus1/2, assigned device number 2 usb.c: new USB bus registered, assigned bus number 2 hub.c: USB hub found hub.c: 2 ports detected usb-uhci.c: v1.275:USB Universal Host Controller Interface driver usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=2 (error=-110) hub.c: USB new device connect on bus1/2, assigned device number 3 usb_control/bulk_msg: timeout usb.c: USB device not accepting new address=3 (error=-110) _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
