[removed linux-usb-devel] Do you ahve all the SCSI modules loaded? Have you followed the User Guide for storage devices?
On Tue, 19 Mar 2002, Jacek Pliszka wrote: > Hi! > > I bought a DMI USB 2.0 Storage Adapter and I need some hep with getting > it working. > > Could somebody help me? > > My plan is to try drivers for some other devices or use usbsnoopy. > > But maybe someone have valid hints for me, maybe it is similar > to existing devices and I have just to add something in unusual_devices. > > Detailed information is below. > > Any help would be very welcome, > > Jacek Pliszka > > > The status is as follows: > 1. After connecting I get: dmesg : > > hub.c: USB new device connect on bus1/1/3, assigned device number 6 > usb.c: USB device 6 (vend/prod 0xc0b/0xb001) is not claimed by any active driver. > SCSI subsystem driver Revision: 1.00 > Initializing USB Mass Storage driver... > usb.c: registered new driver usb-storage > scsi0 : SCSI emulation for USB Mass Storage devices > usb-uhci.c: interrupt, status 3, frame# 744 > usb-uhci.c: interrupt, status 3, frame# 574 > WARNING: USB Mass Storage data integrity not assured > USB Mass Storage device found at 6 > USB Mass Storage support registered. > > 2. usbview shows: > USB 2.0 Storage Adaptor > Manufacturer: DMI > Serial Number: 0B02011C03EA08FA > Speed: 12Mb/s (full) > USB Version: 2.00 > Device Class: 00(>ifc ) > Device Subclass: 00 > Device Protocol: 00 > Maximum Default Endpoint Size: 64 > Number of Configurations: 1 > Vendor Id: 0c0b > Product Id: b001 > Revision Number: 11.10 > > Config Number: 2 > Number of Interfaces: 1 > Attributes: c0 > MaxPower Needed: 98mA > > Interface Number: 0 > Name: usb-storage > Alternate Number: 0 > Class: 08(stor.) > Sub Class: 6 > Protocol: 50 > Number of Endpoints: 3 > > Endpoint Address: 01 > Direction: out > Attribute: 2 > Type: Bulk > Max Packet Size: 64 > Interval: 0ms > > Endpoint Address: 82 > Direction: in > Attribute: 2 > Type: Bulk > Max Packet Size: 64 > Interval: 0ms > > Endpoint Address: 83 > Direction: in > Attribute: 3 > Type: Int. > Max Packet Size: 2 > Interval: 32ms > > 3. lsusb shows > Bus 001 Device 006: ID 0c0b:b001 > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 2.00 > bDeviceClass 0 Interface > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 64 > idVendor 0x0c0b > idProduct 0xb001 > bcdDevice 11.10 > iManufacturer 73 > iProduct 77 > iSerial 101 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 39 > bNumInterfaces 1 > bConfigurationValue 2 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 98mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk (Zip) > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type none > bConfigurationValue 2 > iConfiguration 0 > bmAttributes 0xc0 > Self Powered > MaxPower 98mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 3 > bInterfaceClass 8 Mass Storage > bInterfaceSubClass 6 SCSI > bInterfaceProtocol 80 Bulk (Zip) > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x01 EP 1 OUT > bmAttributes 2 > Transfer Type Bulk > Synch Type none > wMaxPacketSize 64 > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x82 EP 2 IN > bmAttributes 2 > Transfer Type Bulk > Synch Type none > wMaxPacketSize 64 > bInterval 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x83 EP 3 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > wMaxPacketSize 2 > bInterval 32 > Language IDs: (length=4) > 0409 English(US) > > 4. Nothing shows up in /proc/scsi/scsi : > > 5. cdrecord --scanbus finds nothing > > > > > > _______________________________________________ > [EMAIL PROTECTED] > To unsubscribe, use the last form field at: > https://lists.sourceforge.net/lists/listinfo/linux-usb-users > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
