Hi!
I bought a DMI USB 2.0 Storage Adapter and I need some hep with getting
it working.
Could somebody help me?
My plan is to try drivers for some other devices or use usbsnoopy.
But maybe someone have valid hints for me, maybe it is similar
to existing devices and I have just to add something in unusual_devices.
Detailed information is below.
Any help would be very welcome,
Jacek Pliszka
The status is as follows:
1. After connecting I get: dmesg :
hub.c: USB new device connect on bus1/1/3, assigned device number 6
usb.c: USB device 6 (vend/prod 0xc0b/0xb001) is not claimed by any active driver.
SCSI subsystem driver Revision: 1.00
Initializing USB Mass Storage driver...
usb.c: registered new driver usb-storage
scsi0 : SCSI emulation for USB Mass Storage devices
usb-uhci.c: interrupt, status 3, frame# 744
usb-uhci.c: interrupt, status 3, frame# 574
WARNING: USB Mass Storage data integrity not assured
USB Mass Storage device found at 6
USB Mass Storage support registered.
2. usbview shows:
USB 2.0 Storage Adaptor
Manufacturer: DMI
Serial Number: 0B02011C03EA08FA
Speed: 12Mb/s (full)
USB Version: 2.00
Device Class: 00(>ifc )
Device Subclass: 00
Device Protocol: 00
Maximum Default Endpoint Size: 64
Number of Configurations: 1
Vendor Id: 0c0b
Product Id: b001
Revision Number: 11.10
Config Number: 2
Number of Interfaces: 1
Attributes: c0
MaxPower Needed: 98mA
Interface Number: 0
Name: usb-storage
Alternate Number: 0
Class: 08(stor.)
Sub Class: 6
Protocol: 50
Number of Endpoints: 3
Endpoint Address: 01
Direction: out
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 82
Direction: in
Attribute: 2
Type: Bulk
Max Packet Size: 64
Interval: 0ms
Endpoint Address: 83
Direction: in
Attribute: 3
Type: Int.
Max Packet Size: 2
Interval: 32ms
3. lsusb shows
Bus 001 Device 006: ID 0c0b:b001
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 2.00
bDeviceClass 0 Interface
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 64
idVendor 0x0c0b
idProduct 0xb001
bcdDevice 11.10
iManufacturer 73
iProduct 77
iSerial 101
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 39
bNumInterfaces 1
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
bConfigurationValue 2
iConfiguration 0
bmAttributes 0xc0
Self Powered
MaxPower 98mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 3
bInterfaceClass 8 Mass Storage
bInterfaceSubClass 6 SCSI
bInterfaceProtocol 80 Bulk (Zip)
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x01 EP 1 OUT
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x82 EP 2 IN
bmAttributes 2
Transfer Type Bulk
Synch Type none
wMaxPacketSize 64
bInterval 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x83 EP 3 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 2
bInterval 32
Language IDs: (length=4)
0409 English(US)
4. Nothing shows up in /proc/scsi/scsi :
5. cdrecord --scanbus finds nothing
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
