Hi, When burning cd's with the Iomega 650 CD-RW the first two cd's almost allways burn until completed, but the third often (perhaps always) stops burning in the middle of the process. It doesn't stop at the same moment. cdrecord complains with "faio_wait_on_buffer for writer timed out" After rebooting it all works fine again off course, so is rebooting after burning two cd's helpful.
This didn't occur with a laptop I had last year, using the same cd-burner IIRC. I ran cdrecord with a priority of -10. If more information is needed, I will be happy to provide it. Thanks, Aschwin van der Woude ---- Here all necessary debuging info : [root@workstation iso-images]# cdrecord -version Cdrecord 1.10 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling [root@workstation iso-images]# uname -a Linux workstation 2.4.18 #2 Sun Mar 10 21:00:55 EET 2002 i686 unknown [root@workstation /root]# lspci -vvv 00:00.0 Host bridge: VIA Technologies, Inc. VT82C691 [Apollo PRO] (rev c4) Subsystem: Asustek Computer, Inc.: Unknown device 8017 Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Region 0: Memory at d0000000 (32-bit, prefetchable) [size=256M] Capabilities: [a0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW+ Rate=x1,x2 Command: RQ=0 SBA+ AGP+ 64bit- FW- Rate=<none> Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:01.0 PCI bridge: VIA Technologies, Inc. VT82C598/694x [Apollo MVP3/Pro133x AGP] (prog-if 00 [Normal decode]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz+ UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort+ >SERR- <PERR- Latency: 0 Bus: primary=00, secondary=01, subordinate=01, sec-latency=0 I/O behind bridge: 0000e000-0000dfff Memory behind bridge: cc800000-cddfffff Prefetchable memory behind bridge: cdf00000-cfffffff BridgeCtl: Parity- SERR- NoISA- VGA+ MAbort- >Reset- FastB2B- Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1+ D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.0 ISA bridge: VIA Technologies, Inc. VT82C596 ISA [Mobile South] (rev 23) Subsystem: Asustek Computer, Inc.: Unknown device 8017 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 0 00:04.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 10) (prog-if 8a [Master SecP PriP]) Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping+ SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 Region 4: I/O ports at d800 [size=16] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 11) (prog-if 00 [UHCI]) Subsystem: Unknown device 0925:1234 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32, cache line size 08 Interrupt: pin D routed to IRQ 5 Region 4: I/O ports at d400 [size=32] Capabilities: [80] Power Management version 2 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 00:04.3 Host bridge: VIA Technologies, Inc. VT82C596 Power Management (rev 30) Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap- 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- 00:09.0 Ethernet controller: 3Com Corporation 3c905C-TX [Fast Etherlink] (rev 74) Subsystem: 3Com Corporation 3C905C-TX Fast Etherlink for PC Management NIC Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 32 (2500ns min, 2500ns max), cache line size 08 Interrupt: pin A routed to IRQ 5 Region 0: I/O ports at d000 [size=128] Region 1: Memory at cc000000 (32-bit, non-prefetchable) [size=128] Expansion ROM at <unassigned> [disabled] [size=128K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=2 PME- 00:0a.0 Multimedia audio controller: Ensoniq ES1371 [AudioPCI-97] (rev 08) Subsystem: Ensoniq Creative Sound Blaster AudioPCI64V, AudioPCI128 Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B- ParErr- DEVSEL=slow >TAbort- <TAbort+ <MAbort+ >SERR- <PERR- Latency: 32 (3000ns min, 32000ns max) Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at b800 [size=64] Capabilities: [dc] Power Management version 1 Flags: PMEClk- DSI+ D1- D2+ AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- 01:00.0 VGA compatible controller: Matrox Graphics, Inc. MGA G400 AGP (rev 04) (prog-if 00 [VGA]) Subsystem: Matrox Graphics, Inc. Millennium G400 16Mb SGRAM Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium >TAbort- <TAbort- <MAbort- >SERR- <PERR- Latency: 64 (4000ns min, 8000ns max), cache line size 08 Interrupt: pin A routed to IRQ 11 Region 0: Memory at ce000000 (32-bit, prefetchable) [size=32M] Region 1: Memory at cd000000 (32-bit, non-prefetchable) [size=16K] Region 2: Memory at cc800000 (32-bit, non-prefetchable) [size=8M] Expansion ROM at cdff0000 [disabled] [size=64K] Capabilities: [dc] Power Management version 2 Flags: PMEClk- DSI+ D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Capabilities: [f0] AGP version 2.0 Status: RQ=31 SBA+ 64bit- FW- Rate=x1,x2 Command: RQ=31 SBA+ AGP+ 64bit- FW- Rate=<none> [root@workstation iso-images]# cat /proc/bus/usb/devices T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 P: Vendor=0000 ProdID=0000 Rev= 0.00 S: Product=USB UHCI-alt Root Hub S: SerialNumber=d400 C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms T: Bus=01 Lev=01 Prnt=01 Port=01 Cnt=01 Dev#= 3 Spd=12 MxCh= 0 D: Ver= 1.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=059b ProdID=0050 Rev= 1.00 S: Manufacturer=Iomega S: Product=USB Zip CD S: SerialNumber=50AB170A000000000000 C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 3 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=01(O) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl= 0ms E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl= 32ms [root@workstation /root]# cat /proc/modules sg 25444 2 (autoclean) nls_iso8859-1 2848 0 (autoclean) loop 7984 0 (autoclean) sr_mod 13592 1 (autoclean) mga 98448 1 intermezzo 157088 0 (autoclean) binfmt_misc 5764 1 usb-storage 42744 2 scsi_mod 53916 3 [sg sr_mod usb-storage] printer 5408 0 [root@workstation /root]# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: IOMEGA Model: ZIPCD 650 USB Rev: I2,2 Type: CD-ROM ANSI SCSI revision: 02 [root@workstation /root]# cat /proc/iomem 00000000-0009fbff : System RAM 0009fc00-0009ffff : reserved 000a0000-000bffff : Video RAM area 000c0000-000c7fff : Video ROM 000c8000-000c87ff : Extension ROM 000f0000-000fffff : System ROM 00100000-13ffbfff : System RAM 00100000-00258647 : Kernel code 00258648-002bd757 : Kernel data 13ffc000-13ffefff : ACPI Tables 13fff000-13ffffff : ACPI Non-volatile Storage cc000000-cc00007f : 3Com Corporation 3c905C-TX [Fast Etherlink] cc800000-cddfffff : PCI Bus #01 cc800000-ccffffff : Matrox Graphics, Inc. MGA G400 AGP cd000000-cd003fff : Matrox Graphics, Inc. MGA G400 AGP cdf00000-cfffffff : PCI Bus #01 ce000000-cfffffff : Matrox Graphics, Inc. MGA G400 AGP d0000000-dfffffff : VIA Technologies, Inc. VT82C693A/694x [Apollo PRO133x] ffff0000-ffffffff : reserved [root@workstation /root]# cat /proc/ioports 0000-001f : dma1 0020-003f : pic1 0040-005f : timer 0060-006f : keyboard 0080-008f : dma page reg 00a0-00bf : pic2 00c0-00df : dma2 00f0-00ff : fpu 0170-0177 : ide1 01f0-01f7 : ide0 02f8-02ff : serial(auto) 0376-0376 : ide1 03c0-03df : vga+ 03f6-03f6 : ide0 03f8-03ff : serial(auto) 0cf8-0cff : PCI conf1 b800-b83f : Ensoniq ES1371 [AudioPCI-97] b800-b83f : es1371 d000-d07f : 3Com Corporation 3c905C-TX [Fast Etherlink] d000-d07f : 00:09.0 d400-d41f : VIA Technologies, Inc. UHCI USB d400-d41f : usb-uhci d800-d80f : VIA Technologies, Inc. Bus Master IDE d800-d807 : ide0 d808-d80f : ide1 [root@workstation iso-images]# sh /usr/src/linux-2.4.18/scripts/ver_linux If some fields are empty or look unusual you may have an old version. Compare to the current minimal requirements in Documentation/Changes. Linux workstation 2.4.18 #2 Sun Mar 10 21:00:55 EET 2002 i686 unknown Gnu C 2.96 Gnu make 3.79.1 binutils 2.10.91.0.2 util-linux 2.11f mount 2.11g modutils 2.4.13 e2fsprogs 1.23 reiserfsprogs 3.x.0j PPP 2.4.1 Linux C Library 2.2.4 Dynamic linker (ldd) 2.2.4 Procps 2.0.7 Net-tools 1.57 Console-tools 0.3.3 Sh-utils 2.0 Modules Loaded sg nls_iso8859-1 loop sr_mod mga intermezzo binfmt_misc usb-storage scsi_mod printer [root@workstation iso-images]# tail -n 50 /var/log/kernel Mar 20 13:58:21 workstation kernel: usb-storage: usb_stor_transfer_partial(): transfer complete Mar 20 13:58:21 workstation kernel: usb-storage: usb_stor_transfer_partial(): xfer 30720 bytes Mar 20 13:58:21 workstation kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 30720/30720 Mar 20 13:58:21 workstation kernel: usb-storage: usb_stor_transfer_partial(): transfer complete Mar 20 13:58:21 workstation kernel: usb-storage: Bulk data transfer result 0x0 Mar 20 13:58:21 workstation kernel: usb-storage: Attempting to get CSW... Mar 20 13:58:21 workstation kernel: usb-storage: Bulk status result = 0 Mar 20 13:58:21 workstation kernel: usb-storage: Bulk status Sig 0x53425355 T 0x7880 R 0 Stat 0x0 Mar 20 13:58:21 workstation kernel: usb-storage: scsi cmd done, result=0x0 Mar 20 13:58:21 workstation kernel: usb-storage: *** thread sleeping. Mar 20 13:58:21 workstation kernel: usb-storage: queuecommand() called Mar 20 13:58:21 workstation kernel: usb-storage: *** thread awakened. Mar 20 13:58:21 workstation kernel: usb-storage: Command WRITE_10 (10 bytes) Mar 20 13:58:21 workstation kernel: usb-storage: 2a 00 00 04 2f 70 00 00 1f 00 00 00 Mar 20 13:58:21 workstation kernel: usb-storage: Bulk command S 0x43425355 T 0x7881 Trg 0 LUN 0 L 63488 F 0 CL 10 Mar 20 13:58:21 workstation kernel: usb-storage: Bulk command transfer result=0 Mar 20 13:58:21 workstation kernel: usb-storage: usb_stor_transfer_partial(): xfer 32768 bytes Mar 20 13:58:21 workstation kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 32768/32768 Mar 20 13:58:21 workstation kernel: usb-storage: usb_stor_transfer_partial(): transfer complete Mar 20 13:58:21 workstation kernel: usb-storage: usb_stor_transfer_partial(): xfer 30720 bytes Mar 20 13:58:22 workstation kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 30720/30720 Mar 20 13:58:22 workstation kernel: usb-storage: usb_stor_transfer_partial(): transfer complete Mar 20 13:58:22 workstation kernel: usb-storage: Bulk data transfer result 0x0 Mar 20 13:58:22 workstation kernel: usb-storage: Attempting to get CSW... Mar 20 13:58:22 workstation kernel: usb-storage: Bulk status result = 0 Mar 20 13:58:22 workstation kernel: usb-storage: Bulk status Sig 0x53425355 T 0x7881 R 0 Stat 0x0 Mar 20 13:58:22 workstation kernel: usb-storage: scsi cmd done, result=0x0 Mar 20 13:58:22 workstation kernel: usb-storage: *** thread sleeping. Mar 20 13:58:22 workstation kernel: usb-storage: queuecommand() called Mar 20 13:58:22 workstation kernel: usb-storage: *** thread awakened. Mar 20 13:58:22 workstation kernel: usb-storage: Command WRITE_10 (10 bytes) Mar 20 13:58:22 workstation kernel: usb-storage: 2a 00 00 04 2f 8f 00 00 1f 00 00 00 Mar 20 13:58:22 workstation kernel: usb-storage: Bulk command S 0x43425355 T 0x7882 Trg 0 LUN 0 L 63488 F 0 CL 10 Mar 20 13:58:22 workstation kernel: usb-storage: Bulk command transfer result=0 Mar 20 13:58:22 workstation kernel: usb-storage: usb_stor_transfer_partial(): xfer 32768 bytes Mar 20 13:58:22 workstation kernel: usb-storage: usb_stor_bulk_msg() returned 0 xferred 32768/32768 Mar 20 13:58:22 workstation kernel: usb-storage: usb_stor_transfer_partial(): transfer complete Mar 20 13:58:22 workstation kernel: usb-storage: usb_stor_transfer_partial(): xfer 30720 bytes Mar 20 13:59:02 workstation kernel: usb-storage: command_abort() called Mar 20 13:59:02 workstation kernel: usb-storage: usb_stor_bulk_msg() returned -104 xferred 26496/30720 Mar 20 13:59:02 workstation kernel: usb-storage: usb_stor_transfer_partial(): unknown error Mar 20 13:59:02 workstation kernel: usb-storage: Bulk data transfer result 0x2 Mar 20 13:59:02 workstation kernel: usb-storage: Attempting to get CSW... Mar 20 13:59:02 workstation kernel: uhci.c: uhci_submit_urb: urb not available to submit (status = -104) Mar 20 13:59:02 workstation kernel: usb-storage: Bulk status result = -22 Mar 20 13:59:02 workstation kernel: usb-storage: Bulk reset requested Mar 20 13:59:08 workstation kernel: usb-storage: Bulk soft reset completed Mar 20 13:59:08 workstation kernel: usb-storage: -- transport indicates transport failure Mar 20 13:59:08 workstation kernel: usb-storage: scsi cmd done, result=0x70000 Mar 20 13:59:08 workstation kernel: usb-storage: *** thread sleeping. [root@workstation iso-images]# tail -n 50 /var/log/messages Mar 19 15:28:13 workstation modprobe: modprobe: Can't locate module sound-slot-0 Mar 19 15:28:13 workstation modprobe: modprobe: Can't locate module sound-service-0-1 Mar 19 16:13:09 workstation su(pam_unix)[2081]: session closed for user root Mar 19 16:24:23 workstation kernel: mtrr: no MTRR for ce000000,1000000 found Mar 19 16:24:29 workstation gdm(pam_unix)[6424]: session opened for user jutta by (uid=0) Mar 19 16:24:57 workstation gconfd (jutta-6717): starting (version 1.0.8), pid 6717 user 'jutta' Mar 19 17:09:58 workstation gconfd (jutta-6717): GConf server is not in use, shutting down. Mar 19 17:09:58 workstation gconfd (jutta-6717): Exiting Mar 19 18:37:53 workstation gconfd (jutta-7107): starting (version 1.0.8), pid 7107 user 'jutta' Mar 19 18:52:53 workstation gconfd (jutta-7107): GConf server is not in use, shutting down. Mar 19 18:52:53 workstation gconfd (jutta-7107): Exiting Mar 19 19:22:50 workstation kernel: mtrr: no MTRR for ce000000,1000000 found Mar 19 19:22:58 workstation gdm(pam_unix)[7277]: session opened for user jutta by (uid=0) Mar 19 19:23:16 workstation gconfd (jutta-7535): starting (version 1.0.8), pid 7535 user 'jutta' Mar 19 19:38:16 workstation gconfd (jutta-7535): GConf server is not in use, shutting down. Mar 19 19:38:16 workstation gconfd (jutta-7535): Exiting Mar 20 00:16:02 workstation kernel: mtrr: no MTRR for ce000000,1000000 found Mar 20 00:16:09 workstation gdm(pam_unix)[8280]: session opened for user jutta by (uid=0) Mar 20 00:16:32 workstation kernel: usb.c: USB disconnect on device 2 Mar 20 00:16:32 workstation kernel: printer.c: usblp0: removed Mar 20 00:16:32 workstation /sbin/hotplug: arguments (usb) env (PWD=/etc/hotplug HOSTNAME=workstation DEVICE=/proc/bus/usb/001/002 INTERFACE=7/1/2 ACTION=remove DEBUG=kernel MACHTYPE=i386-redhat-linux-gnu OLDPWD=/ DEVFS=/proc/bus/usb TYPE=0/0/0 SHLVL=1 SHELL=/bin/bash HOSTTYPE=i386 OSTYPE=linux-gnu HOME=/ TERM=dumb PATH=/bin:/sbin:/usr/sbin:/usr/bin PRODUCT=3f0/2004/400 _=/usr/bin/env) Mar 20 00:16:33 workstation /sbin/hotplug: invoke /etc/hotplug/usb.agent Mar 20 00:16:37 workstation gconfd (jutta-8553): starting (version 1.0.8), pid 8553 user 'jutta' Mar 20 00:27:19 workstation gdm(pam_unix)[8280]: session closed for user jutta Mar 20 00:27:19 workstation gconfd (jutta-8553): Received signal 1, shutting down cleanly Mar 20 00:27:19 workstation gconfd (jutta-8553): Exiting Mar 20 00:27:19 workstation kernel: mtrr: no MTRR for ce000000,1000000 found Mar 20 00:27:39 workstation gdm(pam_unix)[6424]: session closed for user jutta Mar 20 00:27:39 workstation kernel: mtrr: no MTRR for ce000000,1000000 found Mar 20 00:27:52 workstation gdm(pam_unix)[7277]: session closed for user jutta Mar 20 00:27:52 workstation kernel: mtrr: no MTRR for ce000000,1000000 found Mar 20 09:48:47 workstation modprobe: modprobe: Can't locate module sound-slot-0 Mar 20 09:48:47 workstation modprobe: modprobe: Can't locate module sound-service-0-1 Mar 20 09:51:46 workstation modprobe: modprobe: Can't locate module sound-slot-0 Mar 20 09:51:46 workstation modprobe: modprobe: Can't locate module sound-service-0-1 Mar 20 09:52:33 workstation modprobe: modprobe: Can't locate module sound-slot-0 Mar 20 09:52:33 workstation modprobe: modprobe: Can't locate module sound-service-0-1 Mar 20 09:57:10 workstation modprobe: modprobe: Can't locate module sound-slot-0 Mar 20 09:57:10 workstation modprobe: modprobe: Can't locate module sound-service-0-1 Mar 20 09:57:38 workstation modprobe: modprobe: Can't locate module sound-slot-0 Mar 20 09:57:39 workstation modprobe: modprobe: Can't locate module sound-service-0-1 Mar 20 10:17:52 workstation modprobe: modprobe: Can't locate module sound-slot-0 Mar 20 10:17:52 workstation modprobe: modprobe: Can't locate module sound-service-0-1 Mar 20 11:31:12 workstation kernel: lk_msg() returned 0 xferred 18/18 Mar 20 11:50:57 workstation modprobe: modprobe: Can't locate module sound-slot-0 Mar 20 11:50:57 workstation modprobe: modprobe: Can't locate module sound-service-0-1 Mar 20 13:14:07 workstation kernel: : 0x2, ASC: 0x4, ASCQ: 0x1 Mar 20 13:17:09 workstation kernel: orage: usb_stor_bulk_msg() returned 0 xferred 32768/32768 Mar 20 13:26:14 workstation kernel: storage: Bulk command S 0x43425355 T 0x461b Trg 0 LUN 0 L 63488 F 0 CL 10 Mar 20 13:42:44 workstation kernel: rage: usb_stor_transfer_partial(): xfer 30 bytes
signature.asc
Description: This is a digitally signed message part