On Sun, 24 Mar 2002 00:59, T. K. Vishwanath wrote: <snip> > I am attaching the output of dmesg and /proc/bus/usb/devices and/ > proc/bus/usb/drivers. Thanks. The driver looks good, but the printer is not even enumerated correctly by the usb system.
> As you can see the printer device is not identified(registered) here and > hence i am unable to configure the pinter. I tried using printconf too on > RH 7.2 to configure the printer and the tool was unable to identify the lp > device. Therefore i manually added "/dev/usb/lp0" as the lp device and > configured the printer. After when i start lpd it displays following error: > "Starting lpd: Warning - q1: cannot open lp device '/dev/usb/lp0' - No such > device" That matches - the printer driver doesn't think that the device is actually present. > How can i solve this problem I am not sure. I think that the problem is associated with the timeout error. Can you upgrade to a 2.4.19-pre2 or later patch? Brad _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
