Hi Espen,
        Looking at the Working Device List I see your modem listed as not 
working;

http://www.qbik.ch/usb/devices/showdev.php?id=500

        Also, if you look at the interface it says it the vendor class so
you would need a specific driver (probably) for this device. I also looked
at the (a?) vendor's page and I see no linux drivers, only windows.

http://www.billion.com.tw/new/download/MODEM/D-modem.html

                                                        regards,

                                                        Stephen.

On Wed, 27 Mar 2002, Espen Knut Trydal wrote:

> Thanks alot Stephen. It helped to load usb-uhci. Now Linux reacts when I
> plug in my printer and modem. Beeps and stuff :-)
> 
> But I don't understand what to do to get my modem working. Though the modem
> is metioned in the /proc/bus/usb/devices file, the lights on the modem
> doesn't light (the PWR and MR lights are turned on once windows detect it).
> I have tried to dial, but no reaction. I have set /dev/modem (ppp is
> configured to use that device) to point to /dev/ttyACM0. Does it matter what
> of the /dev/ttyACM[0-9] devices I link /dev/modem to? Might it just be that
> my modem is not supported? Should I use /dev/ttyUSB[0-15] instead?
> 
> I have attached the output of /proc/bus/usb/devices and
> /proc/bus/usb/drivers.
> 
> Thanks again,
> Espen
> 
> > -----Original Message-----
> > From: [EMAIL PROTECTED]
> > [mailto:[EMAIL PROTECTED]]On Behalf Of Stephen
> > J. Gowdy
> > Sent: Wednesday, March 27, 2002 5:27 PM
> > To: Espen Knut Trydal
> > Cc: [EMAIL PROTECTED]
> > Subject: Re: [Linux-usb-users] PROBLEM: Linux doesn't seem to react when
> > I plug in USB devices
> >
> >
> > Hi Espen,
> >     It looks like you need to load the module usb-uhci or uhci to
> > actually drive your host controller.
> >
> >                                             regards,
> >
> >                                             Stephen.
> >
> > --
> >  /------------------------------------+-------------------------\
> > |Stephen J. Gowdy                     | SLAC, MailStop 34,       |
> > |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
> > |http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
> > |EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
> >  \------------------------------------+-------------------------/
> >
> >
> > _______________________________________________
> > [EMAIL PROTECTED]
> > To unsubscribe, use the last form field at:
> > https://lists.sourceforge.net/lists/listinfo/linux-usb-users
> >
> >
> 

-- 
 /------------------------------------+-------------------------\
|Stephen J. Gowdy                     | SLAC, MailStop 34,       |
|http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road,     |
|http://calendar.yahoo.com/gowdy      | Menlo Park CA 94025, USA |
|EMail: [EMAIL PROTECTED]       | Tel: +1 650 926 3144     |
 \------------------------------------+-------------------------/


_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users

Reply via email to