relevent software: kernel-2.4.16 gnome-pilot-0.1.64-1 pilot-link-0.9.5.0-8
I'm looking for any help getting my treo synced. I've checked the archives and done a few searches, but no luck. If anyone has any pointers to information, I'd appreciate it. I'm trying to connect using gnome-pilot. /dev/pilot is a link to /dev/usb/ttyUSB0. I've created the /dev/usb/usbTTYx devices as per the USB Guide ( http://www.linux-usb.org/USB-guide/book1.html ). When I hit the hotsync button, the usbserial and visor modules get loaded, but I keep getting timed out. output from dmesg: =================== hub.c: USB new device connect on bus1/1, assigned device number 3 usbserial.c: Handspring Visor converter detected visor.c: Handspring Visor: Number of ports: 2 visor.c: Handspring Visor: port 1, is for Generic use and is bound to ttyUSB0 visor.c: Handspring Visor: port 2, is for HotSync use and is bound to ttyUSB1 usbserial.c: Handspring Visor converter now attached to ttyUSB0 (or usb/tts/0 for devfs) usbserial.c: Handspring Visor converter now attached to ttyUSB1 (or usb/tts/1 for devfs) usb.c: USB disconnect on device 3 usbserial.c: Handspring Visor converter now disconnected from ttyUSB0 usbserial.c: Handspring Visor converter now disconnected from ttyUSB1 ==================== Any suggestions? Am I missing something? TIA. dan -- embrace the wrevolution! http://wrevolution.org _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
