I sent this message once before, but it hasn't shown up yet. Sorry if
this ends up being a duplicate post. The original was fairly long,
since I included a bunch of kernel debugging logs, and so might have not
passed muster on any size restrictions this list might have. I've cut
them off to just the last bit. Hopefully it will still provide enough
information.
I have an HP CD-Writer+ 8290 that I have been using with no problems
reading and writing CDRs, but recently I've had a need to write CDRWs.
I can read a CDRW that I have written on another device with no
problems, but when I attempt to write one, cdrecord hangs, and even a
kill -9 will not kill it. I'm running RedHat 7.2 with kernel 2.4.9-31,
and I've compiled the kernel with USB and USB Storage debugging. I've
tried the cdrecord 1.10 that shipped with RedHat, as well as compiling
it myself. I've also tried cdrecord 1.11a24, but that caused kernel
panics.
Has anyone seen anything like this? Any pointers on getting this
working?
Thanks
Mike
Here is the output of cdrecord -v dev=0,0,0 test.iso:
Cdrecord 1.10 (i586-pc-linux-gnu) Copyright (C) 1995-2001 J�rg Schilling
TOC Type: 1 = CD-ROM
scsidev: '0,0,0'
scsibus: 0 target: 0 lun: 0
Linux sg driver version: 3.1.20
Using libscg version 'schily-0.5'
atapi: 1
Device type : Removable CD-ROM
Version : 2
Response Format: 1
Vendor_info : 'HP '
Identifikation : 'CD-Writer+ 8290 '
Revision : '1.3C'
Device seems to be: Generic mmc CD-RW.
Using generic SCSI-3/mmc CD-R driver (mmc_cdr).
Driver flags : SWABAUDIO
Drive buf size : 1343488 = 1312 KB
FIFO size : 4194304 = 4096 KB
Track 01: data 368 MB
Total size: 422 MB (41:53.77) = 188533 sectors
Lout start: 423 MB (41:55/58) = 188533 sectors
Current Secsize: 2048
ATIP info from disk:
Indicated writing power: 5
Reference speed: 2
Is not unrestricted
Is erasable
ATIP start of lead in: -11745 (97:25/30)
ATIP start of lead out: 359849 (79:59/74)
speed low: 0 speed high: 4
power mult factor: 4 6
recommended erase/write power: 5
A2 values: 4A D8 5A
Disk type: Phase change
Manuf. index: 40
Manufacturer: INFODISC Technology Co., Ltd.
Blocks total: 359849 Blocks current: 359849 Blocks remaining: 171316
Starting to write CD/DVD at speed 4 in write mode for single session.
Last chance to quit, starting real write in 0 seconds. Operation starts.
Waiting for reader process to fill input buffer ... input buffer ready.
Performing OPC...
Starting new track at sector: 0
Track 01: 0 of 368 MB written.cdrecord: faio_wait_on_buffer for writer
timed out.
Here is the kernel debugging output:
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread sleeping.
Jun 18 08:59:46 wooginator kernel: usb-storage: queuecommand() called
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread awakened.
Jun 18 08:59:46 wooginator kernel: usb-storage: Command TEST_UNIT_READY
(6 bytes)
Jun 18 08:59:46 wooginator kernel: usb-storage: 00 00 00 00 00 00 dc c2
00 00 00 00
Jun 18 08:59:46 wooginator kernel: usb-storage: Status = 50
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 14 of 14
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: Waited not busy for 0
steps
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 12 of 12
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: Waited not busy for 1
steps
Jun 18 08:59:46 wooginator kernel: usb-storage: scsi cmd done,
result=0x0
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread sleeping.
Jun 18 08:59:46 wooginator kernel: usb-storage: queuecommand() called
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread awakened.
Jun 18 08:59:46 wooginator kernel: usb-storage: Command MODE_SELECT_10
(10 bytes)
Jun 18 08:59:46 wooginator kernel: usb-storage: 55 10 00 00 00 00 00 00
3c 00 00 00
Jun 18 08:59:46 wooginator kernel: usb-storage: Status = 50
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 38 of 38
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 60 of 60
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: Waited not busy for 0
steps
Jun 18 08:59:46 wooginator kernel: usb-storage: Wrote 0000003C bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: scsi cmd done,
result=0x0
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread sleeping.
Jun 18 08:59:46 wooginator kernel: usb-storage: queuecommand() called
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread awakened.
Jun 18 08:59:46 wooginator kernel: usb-storage: Command READ TRACK
INFORMATION (10 bytes)
Jun 18 08:59:46 wooginator kernel: usb-storage: 52 01 00 00 00 ff 00 00
1c 00 00 00
Jun 18 08:59:46 wooginator kernel: usb-storage: Status = 50
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 14 of 14
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: Waited not busy for 0
steps
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 12 of 12
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: Waited not busy for 1
steps
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred in 28 of 28
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: 00 1A 01 01 00 04 4F 01
00 00 00 00 00 00 00 00
Jun 18 08:59:46 wooginator kernel: usb-storage: 00 05 7D A7 00 00 00 00
00 05 7D A7
Jun 18 08:59:46 wooginator kernel: usb-storage: scsi cmd done,
result=0x0
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread sleeping.
Jun 18 08:59:46 wooginator kernel: usb-storage: queuecommand() called
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread awakened.
Jun 18 08:59:46 wooginator kernel: usb-storage: Command READ BUFFER
CAPACITY (10 bytes)
Jun 18 08:59:46 wooginator kernel: usb-storage: 5c 00 00 00 00 00 00 00
0c 00 00 00
Jun 18 08:59:46 wooginator kernel: usb-storage: Status = 50
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 14 of 14
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: Waited not busy for 0
steps
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 12 of 12
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: Waited not busy for 0
steps
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred in 12 of 12
bytes
Jun 18 08:59:46 wooginator kernel: usb-storage: 00 0A 00 00 00 14 80 00
00 14 80 00
Jun 18 08:59:46 wooginator kernel: usb-storage: scsi cmd done,
result=0x0
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread sleeping.
Jun 18 08:59:46 wooginator kernel: usb-storage: queuecommand() called
Jun 18 08:59:46 wooginator kernel: usb-storage: *** thread awakened.
Jun 18 08:59:46 wooginator kernel: usb-storage: Command WRITE_10 (10
bytes)
Jun 18 08:59:46 wooginator kernel: usb-storage: 2a 00 00 00 00 00 00 00
1f 00 33 c0
Jun 18 08:59:46 wooginator kernel: usb-storage: Status = 50
Jun 18 08:59:46 wooginator kernel: usb-storage: Transferred out 38 of 38
bytes
Jun 18 09:00:26 wooginator kernel: usb-storage: command_abort() called
----------------------------------------------------------------------------
Bringing you mounds of caffeinated joy
>>> http://thinkgeek.com/sf <<<
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
