Hello list,
I have a Fujitsu Siemens C-1010. Everything seems to work OK apart from
the USB part.
I have pasted the output of dmesg when inserting a new device, the
output of lsusb and lspci. The version of the kernel is 2.4.19-rc1
(2.4.18 didn't work either). My apologies for the rather lengthy post,
but I reckoned it's probably better to include as much diagnostics info
as possible. usb-uhci has been compiled into the kernel. I had it as a
module first, but that made no difference.
If someone could shed some light on this, I'd be very grateful. If
anyone needs more information, don't hesitate to ask.
TIA,
Xander
Output follows below:
------------------------- lspci output ------------------------------
lspci:
panic2:~# lspci
00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133]
00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP]
00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev
01)
00:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev
01)
00:0b.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8026
00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139
(rev 10)
00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge]
(rev 10)
00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06)
00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1e)
00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1e)
00:11.4 Bridge: VIA Technologies, Inc. VT8235 Power Management (rev 10)
00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio
Controller (rev 40)
01:00.0 VGA compatible controller: S3 Inc.: Unknown device 8d01 (rev 02)
panic2:~# lspci -n
00:00.0 Class 0600: 1106:0605
00:01.0 Class 0604: 1106:8605
00:0a.0 Class 0607: 1217:6933 (rev 01)
00:0a.1 Class 0607: 1217:6933 (rev 01)
00:0b.0 Class 0c00: 104c:8026
00:0d.0 Class 0200: 10ec:8139 (rev 10)
00:11.0 Class 0601: 1106:8231 (rev 10)
00:11.1 Class 0101: 1106:0571 (rev 06)
00:11.2 Class 0c03: 1106:3038 (rev 1e)
00:11.3 Class 0c03: 1106:3038 (rev 1e)
00:11.4 Class 0680: 1106:8235 (rev 10)
00:11.5 Class 0401: 1106:3058 (rev 40)
01:00.0 Class 0300: 5333:8d01 (rev 02)
------------------------------ lsusb output ---------------------------
panic2:~# lsusb
Bus 002 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2 USB UHCI Root Hub
iSerial 1 1300
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 255
Language IDs: (length=4)
0000 (null)((null))
Bus 001 Device 001: ID 0000:0000 Virtual Hub
Device Descriptor:
bLength 18
bDescriptorType 1
bcdUSB 1.00
bDeviceClass 9 Hub
bDeviceSubClass 0
bDeviceProtocol 0
bMaxPacketSize0 8
idVendor 0x0000 Virtual
idProduct 0x0000 Hub
bcdDevice 0.00
iManufacturer 0
iProduct 2 USB UHCI Root Hub
iSerial 1 1200
bNumConfigurations 1
Configuration Descriptor:
bLength 9
bDescriptorType 2
wTotalLength 25
bNumInterfaces 1
bConfigurationValue 1
iConfiguration 0
bmAttributes 0x40
Self Powered
MaxPower 0mA
Interface Descriptor:
bLength 9
bDescriptorType 4
bInterfaceNumber 0
bAlternateSetting 0
bNumEndpoints 1
bInterfaceClass 9 Hub
bInterfaceSubClass 0
bInterfaceProtocol 0
iInterface 0
Endpoint Descriptor:
bLength 7
bDescriptorType 5
bEndpointAddress 0x81 EP 1 IN
bmAttributes 3
Transfer Type Interrupt
Synch Type none
wMaxPacketSize 8
bInterval 255
Language IDs: (length=4)
0000 (null)((null))
---------------------------- dmesg output ---------------------------
This is the error message I get in dmesg when inserting a Logitech Dual
Optical mouse: (a similar error occurs when attaching an Apacer
HandyDrive USB storage device)
hub.c: USB new device connect on bus1/1, assigned device number 10
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=10 (error=-110)
hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s
hub.c: USB new device connect on bus1/1, assigned device number 11
usb_control/bulk_msg: timeout
usb.c: USB device not accepting new address=11 (error=-110)
hub.c: port 2, portstatus 300, change 0, 1.5 Mb/s
hub.c: port 1, portstatus 301, change 0, 1.5 Mb/s
hub.c: port 2, portstatus 300, change 0, 1.5 Mb/s
------------------------------ /proc/interrupts -----------------------
panic2:~# cat /proc/interrupts
CPU0
0: 156537 XT-PIC timer
1: 5471 XT-PIC keyboard
2: 0 XT-PIC cascade
8: 3 XT-PIC rtc
9: 0 XT-PIC usb-uhci, usb-uhci
10: 4026 XT-PIC via82cxxx, eth0, O2 Micro, Inc. OZ6933
Cardbus Controller, O2 Micro, Inc. OZ6933 Cardbus Controller (#2)
12: 49808 XT-PIC PS/2 Mouse
14: 10122 XT-PIC ide0
15: 21 XT-PIC ide1
NMI: 0
ERR: 0
------------------- /proc/bus/usb/devices ----------------------------
panic2:/proc# cat /proc/bus/usb/devices
T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=1300
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2
B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0
D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1
P: Vendor=0000 ProdID=0000 Rev= 0.00
S: Product=USB UHCI Root Hub
S: SerialNumber=1200
C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA
I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub
E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms
------------------------ uname -a -----------------------------------
panic2:~# uname -a
Linux panic2.slipnet 2.4.19-rc1 #1 Sat Jun 29 10:40:31 CEST 2002 i686
unknown
--
---------------------------------------------------------
[EMAIL PROTECTED] [EMAIL PROTECTED] www.12Secure.net
Redundant stupidy: Multiple single points of failure
implemented by spare idiots on standby.
# find / -name your\ base -exec chown us:us -R {} \;
---------------------------------------------------------
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
No, I will not fix your computer.
http://thinkgeek.com/sf
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
