Could it be; http://www.linux-usb.org/FAQ.html#ts6
On Sat, 29 Jun 2002, Xander Soldaat wrote: > Hello list, > > I have a Fujitsu Siemens C-1010. Everything seems to work OK apart from > the USB part. > I have pasted the output of dmesg when inserting a new device, the > output of lsusb and lspci. The version of the kernel is 2.4.19-rc1 > (2.4.18 didn't work either). My apologies for the rather lengthy post, > but I reckoned it's probably better to include as much diagnostics info > as possible. usb-uhci has been compiled into the kernel. I had it as a > module first, but that made no difference. > If someone could shed some light on this, I'd be very grateful. If > anyone needs more information, don't hesitate to ask. > > TIA, > Xander > > Output follows below: > > ------------------------- lspci output ------------------------------ > lspci: > panic2:~# lspci > 00:00.0 Host bridge: VIA Technologies, Inc. VT8605 [ProSavage PM133] > 00:01.0 PCI bridge: VIA Technologies, Inc. VT8605 [PM133 AGP] > 00:0a.0 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev > 01) > 00:0a.1 CardBus bridge: O2 Micro, Inc. OZ6933 Cardbus Controller (rev > 01) > 00:0b.0 FireWire (IEEE 1394): Texas Instruments: Unknown device 8026 > 00:0d.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL-8139 > (rev 10) > 00:11.0 ISA bridge: VIA Technologies, Inc. VT8231 [PCI-to-ISA Bridge] > (rev 10) > 00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) > 00:11.2 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1e) > 00:11.3 USB Controller: VIA Technologies, Inc. UHCI USB (rev 1e) > 00:11.4 Bridge: VIA Technologies, Inc. VT8235 Power Management (rev 10) > 00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio > Controller (rev 40) > 01:00.0 VGA compatible controller: S3 Inc.: Unknown device 8d01 (rev 02) > > > panic2:~# lspci -n > 00:00.0 Class 0600: 1106:0605 > 00:01.0 Class 0604: 1106:8605 > 00:0a.0 Class 0607: 1217:6933 (rev 01) > 00:0a.1 Class 0607: 1217:6933 (rev 01) > 00:0b.0 Class 0c00: 104c:8026 > 00:0d.0 Class 0200: 10ec:8139 (rev 10) > 00:11.0 Class 0601: 1106:8231 (rev 10) > 00:11.1 Class 0101: 1106:0571 (rev 06) > 00:11.2 Class 0c03: 1106:3038 (rev 1e) > 00:11.3 Class 0c03: 1106:3038 (rev 1e) > 00:11.4 Class 0680: 1106:8235 (rev 10) > 00:11.5 Class 0401: 1106:3058 (rev 40) > 01:00.0 Class 0300: 5333:8d01 (rev 02) > > > ------------------------------ lsusb output --------------------------- > panic2:~# lsusb > > Bus 002 Device 001: ID 0000:0000 Virtual Hub > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.00 > bDeviceClass 9 Hub > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0000 Virtual > idProduct 0x0000 Hub > bcdDevice 0.00 > iManufacturer 0 > iProduct 2 USB UHCI Root Hub > iSerial 1 1300 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x40 > Self Powered > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > wMaxPacketSize 8 > bInterval 255 > Language IDs: (length=4) > 0000 (null)((null)) > > Bus 001 Device 001: ID 0000:0000 Virtual Hub > Device Descriptor: > bLength 18 > bDescriptorType 1 > bcdUSB 1.00 > bDeviceClass 9 Hub > bDeviceSubClass 0 > bDeviceProtocol 0 > bMaxPacketSize0 8 > idVendor 0x0000 Virtual > idProduct 0x0000 Hub > bcdDevice 0.00 > iManufacturer 0 > iProduct 2 USB UHCI Root Hub > iSerial 1 1200 > bNumConfigurations 1 > Configuration Descriptor: > bLength 9 > bDescriptorType 2 > wTotalLength 25 > bNumInterfaces 1 > bConfigurationValue 1 > iConfiguration 0 > bmAttributes 0x40 > Self Powered > MaxPower 0mA > Interface Descriptor: > bLength 9 > bDescriptorType 4 > bInterfaceNumber 0 > bAlternateSetting 0 > bNumEndpoints 1 > bInterfaceClass 9 Hub > bInterfaceSubClass 0 > bInterfaceProtocol 0 > iInterface 0 > Endpoint Descriptor: > bLength 7 > bDescriptorType 5 > bEndpointAddress 0x81 EP 1 IN > bmAttributes 3 > Transfer Type Interrupt > Synch Type none > wMaxPacketSize 8 > bInterval 255 > Language IDs: (length=4) > 0000 (null)((null)) > > ---------------------------- dmesg output --------------------------- > This is the error message I get in dmesg when inserting a Logitech Dual > Optical mouse: (a similar error occurs when attaching an Apacer > HandyDrive USB storage device) > > hub.c: USB new device connect on bus1/1, assigned device number 10 > usb_control/bulk_msg: timeout > usb.c: USB device not accepting new address=10 (error=-110) > hub.c: port 1, portstatus 303, change 0, 1.5 Mb/s > hub.c: USB new device connect on bus1/1, assigned device number 11 > usb_control/bulk_msg: timeout > usb.c: USB device not accepting new address=11 (error=-110) > hub.c: port 2, portstatus 300, change 0, 1.5 Mb/s > hub.c: port 1, portstatus 301, change 0, 1.5 Mb/s > hub.c: port 2, portstatus 300, change 0, 1.5 Mb/s > > ------------------------------ /proc/interrupts ----------------------- > > panic2:~# cat /proc/interrupts > CPU0 > 0: 156537 XT-PIC timer > 1: 5471 XT-PIC keyboard > 2: 0 XT-PIC cascade > 8: 3 XT-PIC rtc > 9: 0 XT-PIC usb-uhci, usb-uhci > 10: 4026 XT-PIC via82cxxx, eth0, O2 Micro, Inc. OZ6933 > Cardbus Controller, O2 Micro, Inc. OZ6933 Cardbus Controller (#2) > 12: 49808 XT-PIC PS/2 Mouse > 14: 10122 XT-PIC ide0 > 15: 21 XT-PIC ide1 > NMI: 0 > ERR: 0 > > ------------------- /proc/bus/usb/devices ---------------------------- > > panic2:/proc# cat /proc/bus/usb/devices > T: Bus=02 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=1300 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > T: Bus=01 Lev=00 Prnt=00 Port=00 Cnt=00 Dev#= 1 Spd=12 MxCh= 2 > B: Alloc= 0/900 us ( 0%), #Int= 0, #Iso= 0 > D: Ver= 1.00 Cls=09(hub ) Sub=00 Prot=00 MxPS= 8 #Cfgs= 1 > P: Vendor=0000 ProdID=0000 Rev= 0.00 > S: Product=USB UHCI Root Hub > S: SerialNumber=1200 > C:* #Ifs= 1 Cfg#= 1 Atr=40 MxPwr= 0mA > I: If#= 0 Alt= 0 #EPs= 1 Cls=09(hub ) Sub=00 Prot=00 Driver=hub > E: Ad=81(I) Atr=03(Int.) MxPS= 8 Ivl=255ms > > ------------------------ uname -a ----------------------------------- > > panic2:~# uname -a > Linux panic2.slipnet 2.4.19-rc1 #1 Sat Jun 29 10:40:31 CEST 2002 i686 > unknown > > > -- /------------------------------------+-------------------------\ |Stephen J. Gowdy | SLAC, MailStop 34, | |http://www.slac.stanford.edu/~gowdy/ | 2575 Sand Hill Road, | |http://calendar.yahoo.com/gowdy | Menlo Park CA 94025, USA | |EMail: [EMAIL PROTECTED] | Tel: +1 650 926 3144 | \------------------------------------+-------------------------/ ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek No, I will not fix your computer. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
