I'm also interested to know if anyone has gotten the AMD-765 USB to work on their Tyan MB. I have a Tyan Thunder K7 (S2462) board, and I get nowhere with any USB device whatsoever. (kernel 2.4.18, Mandrake 8.2)
Syslog (on boot): usb.c: registered new driver usbdevfs usb.c: registered new driver hub usb-ohci.c: USB OHCI at membase 0xc00dc000, IRQ 11 usb-ohci.c: usb-00:07.4, Advanced Micro Devices [AMD] AMD-765 [Viper] USB usb.c: new USB bus registered, assigned bus number 1 Syslog (when plugging in ANY device) kernel: hub.c: Cannot enable port 3 of hub 1, disabling port. kernel: hub.c: Maybe the USB cable is bad? </Ace> Subject: Re: [Linux-usb-users] usb-ohci seems broken on AMD-765 Viper usb-ohci From: <[EMAIL PROTECTED]> Date: 2002-02-26 3:22:39 Are you aware of anyone else succesfully running usb-ohci on the Tyan Tiger-MP motherboard [with the AMD-765 [Viper] USB (rev 7)]? If so, than I will know that I recieved a faulty motherboard, and I need to go through the hassel of exchanging it while it is still under warranty. But I don't want to mess with Tyan RMA [and losing my system for a week or two] if it is a bug in the driver and thus wouldn't help anyway. If I had windows, I could boot into it and test to see if the usb works there, but I use linux exclusively. _____________________________________________________ Supercharge your e-mail with a 25MB Inbox, POP3 Access, No Ads and NoTaglines --> LYCOS MAIL PLUS. http://www.mail.lycos.com/brandPage.shtml?pageId=plus ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
