On Thu, Aug 15, 2002 at 08:42:28AM +0200, Trevor Spiteri wrote: > > dmesg shows me: > hub.c: USB new device connect on bus1/1, assigned device number 5 > usbserial.c: FTDI 8U232AM converter detected > usbserial.c: FTDI 8U232AM converter now attached to ttyUSB1 (or > usb/tts/1 for devfs) > > So I will know that the new device number 5 is ttyUSB1 and open that. > Right?
You will open ttyUSB1, yes. Ignore the "device number" stuff, that's for USB internals, and means nothing to users. > > And are you sure that your modem will work with the ftdi_sio driver? > > I can send AT commands and get the response and I can use minicom. I do > not have a dialup account at the moment so I cannot test that, but I > guess that if AT commands work, the modem works, right? Heh, it's a start, but try to send some flow control and other line change commands to the device (buad rate changes, etc.) That's the real test to see if the device is compatible or not. Good luck, greg k-h ------------------------------------------------------- This sf.net email is sponsored by: OSDN - Tired of that same old cell phone? Get a new here for FREE! https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390 _______________________________________________ [EMAIL PROTECTED] To unsubscribe, use the last form field at: https://lists.sourceforge.net/lists/listinfo/linux-usb-users
