Hi!
Wrote some time ago about my problems. Appears that cable was indeed
defective.
1. With Red Hat 7.3 kernel 2.4.18-10 it seems to work. Devices:
Iogear PCI USB 2.0 controller from (buy.com $10AR)
DMI USB 2.0 5.25" enclosure (xpcgear $60,pcmicrostore $46)
2. In 2.5.33 after modprobe ehci-hcd (device is connected) I am getting:
PCI: Found IRQ 10 for device 01:0b.2
PCI: Sharing IRQ 10 with 00:1f.3
PCI: Sharing IRQ 10 with 01:09.0
hcd-pci.c: ehci-hcd @ 01:0b.2, NEC Corporation USB 2.0
hcd-pci.c: irq 10, pci mem c8938c00
hcd.c: new USB bus registered, assigned bus number 1
ehci-hcd.c: USB 2.0 support enabled, EHCI rev 0.95
hub.c: USB hub found at 0
hub.c: 5 ports detected
hub.c: new USB device 01:0b.2-2, assigned address 2
scsi0 : SCSI emulation for USB Mass Storage devices
kernel BUG at scsiglue.c:150!
invalid operand: 0000
CPU: 0
EIP: 0060:[<c892319c>] Not tainted
EFLAGS: 00013006
eax: 00000003 ebx: c593bf2c ecx: c5ddd200 edx: c5ddd800
esi: 00003286 edi: c5ddd200 ebp: c5dddc00 esp: c593bf00
ds: 0068 es: 0068 ss: 0068
Process scsi_eh_0 (pid: 1236, threadinfo=c593a000 task=c76c4100)
Stack: c8831ce8 c5ddd200 c88317e0 00000000 00000000 00000000 c593bf38
c593bf38
c76c4100 00000000 c02af180 00000000 00000000 00000000 c593bf38
c593bf38
c593bf58 c011236e c593bfcc c5ddd200 c5ddd258 00000000 00000000
c8831b45
Call Trace: [<c8831ce8>] [<c88317e0>] [<c011236e>] [<c8831b45>]
[<c8832475>]
[<c8832b36>] [<c0107238>] [<c8832a60>] [<c01055a5>]
Code: 0f 0b 96 00 c8 d6 92 c8 8b 82 24 01 00 00 85 c0 74 08 0f 0b
Br,
Jacek
-------------------------------------------------------
This sf.net email is sponsored by: OSDN - Tired of that same old
cell phone? Get a new here for FREE!
https://www.inphonic.com/r.asp?r=sourceforge1&refcode1=vs3390
_______________________________________________
[EMAIL PROTECTED]
To unsubscribe, use the last form field at:
https://lists.sourceforge.net/lists/listinfo/linux-usb-users
